Repeating cuts of 3/16" dowel
 

I'm working on a jig to hold my wood for planeing. Part of the jig
requires cutting a dowel rod to pieces (mostly) the same size. I need 12
such pieces, about an 1" to 1 1/2" in size.

Does anyone have any suggestions on how to make the cuts evenly and
efficiently? I don't have a band saw, and don't have plans to get one
soon.

Puckdropper
--
Wise is the man who attempts to answer his question before asking it.

To email me directly, send a message to puckdropper (at) fastmail.fm

Repeating cuts of 3/16" dowel
 

Puckdropper writes:

I'm working on a jig to hold my wood for planeing. Part of the jig
requires cutting a dowel rod to pieces (mostly) the same size. I need 12
such pieces, about an 1" to 1 1/2" in size.

Does anyone have any suggestions on how to make the cuts evenly and
efficiently? I don't have a band saw, and don't have plans to get one
soon.

That's simple.

I'd use a bench hook, http://en.wikipedia.org/wiki/Bench_hook
with a stop the inch from the edge of the hook.
Clamp a piece of wood to your bench for the stop.

Push the dowel until it hits the stop. Cut at the edge of the
hook. Repeat. My benchhook has the top guide flush with the edge
(unlike the above drawing). I use this as a guide for square cuts.


--
Sending unsolicited commercial e-mail to this account incurs a fee of
$500 per message, and acknowledges the legality of this contract.

Repeating cuts of 3/16" dowel
 

Puckdropper wrote:
| I'm working on a jig to hold my wood for planeing. Part of the jig
| requires cutting a dowel rod to pieces (mostly) the same size. I
| need 12 such pieces, about an 1" to 1 1/2" in size.
|
| Does anyone have any suggestions on how to make the cuts evenly and
| efficiently? I don't have a band saw, and don't have plans to get
| one soon.

If I didn't have a band saw, I'd clamp a stop block to my TS sled and
use another clamp to hold the dowel stock while I cut - should be able
to produce a dozen identical pieces in about two minutes...

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto

Repeating cuts of 3/16" dowel
 

On Feb 2, 5:56 am, Puckdropper wrote:
I'm working on a jig to hold my wood for planeing. Part of the jig
requires cutting a dowel rod to pieces (mostly) the same size. I need 12
such pieces, about an 1" to 1 1/2" in size.

Does anyone have any suggestions on how to make the cuts evenly and
efficiently? I don't have a band saw, and don't have plans to get one
soon.

Puckdropper
--
Wise is the man who attempts to answer his question before asking it.

To email me directly, send a message to puckdropper (at) fastmail.fm

I glued an old style wooden clothespin with the spring to a piece of
plywood to hold dowels when I need to cut little pieces with my
chopsaw.
Or try this:
http://tinyurl.com/y7z7pa

Repeating cuts of 3/16" dowel
 

On Fri, 2 Feb 2007 05:53:44 -0600, "Morris Dovey"
wrote:

Puckdropper wrote:
| I'm working on a jig to hold my wood for planeing. Part of the jig
| requires cutting a dowel rod to pieces (mostly) the same size. I
| need 12 such pieces, about an 1" to 1 1/2" in size.
|
| Does anyone have any suggestions on how to make the cuts evenly and
| efficiently? I don't have a band saw, and don't have plans to get
| one soon.

If I didn't have a band saw, I'd clamp a stop block to my TS sled and
use another clamp to hold the dowel stock while I cut - should be able
to produce a dozen identical pieces in about two minutes...

He doesn't say what he has. Personally I'd just clamp a stop to the
fence on my RAS and chop chop chop. One should be able to do the same
with a CMS or SCMS.

Repeating cuts of 3/16" dowel
 

"Puckdropper" wrote in message
I'm working on a jig to hold my wood for planeing. Part of the jig
requires cutting a dowel rod to pieces (mostly) the same size. I need 12
such pieces, about an 1" to 1 1/2" in size.

Does anyone have any suggestions on how to make the cuts evenly and
efficiently? I don't have a band saw, and don't have plans to get one
soon.

On apparently occasions in this current wooddorking world, nothing beats a
handsaw ... this is one of them, IMHO.

--
www.e-woodshop.net
Last update: 1/27/07

Repeating cuts of 3/16" dowel
 

On apparently occasions in this current wooddorking world, nothing beats a
handsaw ... this is one of them, IMHO.

That was going to be my suggestion. A 3/16 dowel would be about half
a light stroke with a good japanese pull saw, or a little jig could be
rigged up with a stop and some kind of bearing surface for a flush cut
saw, if you were doing a whole bunch.
Good luck,
Andy

Repeating cuts of 3/16" dowel
 

Bruce Barnett wrote in
:



That's simple.

I'd use a bench hook, http://en.wikipedia.org/wiki/Bench_hook
with a stop the inch from the edge of the hook.
Clamp a piece of wood to your bench for the stop.

Push the dowel until it hits the stop. Cut at the edge of the
hook. Repeat. My benchhook has the top guide flush with the edge
(unlike the above drawing). I use this as a guide for square cuts.


That looks like a good idea, thanks!

Puckropper
--
Hey, where's my signature.txt file? (Must not be copied over yet... ah
the joys of a new hard drive.)

Repeating cuts of 3/16" dowel
 

"Morris Dovey" wrote in news:45c32717$0$508$815e3792
@news.qwest.net:


If I didn't have a band saw, I'd clamp a stop block to my TS sled and
use another clamp to hold the dowel stock while I cut - should be able
to produce a dozen identical pieces in about two minutes...

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto



I thought of that, but we've got 3" of snow on the ground and I don't
want to mess with it. (My power tool shop is the great outdoors.)

Puckdropper
--
Oh, there it is. ;-)

To email me directly, send a message to puckdropper (at) fastmail.fm