DeWalt Radial Arm Saw Parts Prices
 

The yoke lock on my 70's vintage B&D "DeWalt" radial arm saw kept loosening.
After much fiddling, it became apparent that the adjustment washer internal
tab had broken off. The tab rides in a groove in the king bolt.

Of course DeWalt didn't have the part, and advised me to call Wolfe
Machinery. The wanted $15 for this stamped-out sheetmetal 2" diameter piece
and $7 for shipping a 0.5 oz. item.

I did order the part from Original Saw Company. They had a minimum $15 order
policy, but gave me a "deal" and sold the part for $10 and "a couple bucks
shipping". The total came to $17.29 as my Visa statement shows, however.

After ordering the part, I took the old washer and made a new tab on it.
This kludge worked. So if anyone is in the market for this vintage part, I
could let it go for my minimum order fee of $100 plus S&H, and applicable
municipal, county, and state taxes, of course.

John Pinkham

DeWalt Radial Arm Saw Parts Prices
 

I had to buy a small plastic pritner part for a printer I had. The price
for the part was fairly reasonable, $2 something, but the company wanted
$25 for shipping and handling on any order under $50. Since I had the
same printer that I was fixing, I decided to buy 5 of the parts to bring
the price per part down. Likely won't ever use the extra parts.

Maybe I'll buy your washer in case I ever get the DeWalt ras you have.

John Pinkham wrote:
The yoke lock on my 70's vintage B&D "DeWalt" radial arm saw kept loosening.
After much fiddling, it became apparent that the adjustment washer internal
tab had broken off. The tab rides in a groove in the king bolt.

Of course DeWalt didn't have the part, and advised me to call Wolfe
Machinery. The wanted $15 for this stamped-out sheetmetal 2" diameter piece
and $7 for shipping a 0.5 oz. item.

I did order the part from Original Saw Company. They had a minimum $15 order
policy, but gave me a "deal" and sold the part for $10 and "a couple bucks
shipping". The total came to $17.29 as my Visa statement shows, however.

After ordering the part, I took the old washer and made a new tab on it.
This kludge worked. So if anyone is in the market for this vintage part, I
could let it go for my minimum order fee of $100 plus S&H, and applicable
municipal, county, and state taxes, of course.

John Pinkham

DeWalt Radial Arm Saw Parts Prices
 

I have a vintage, pre B&D Dewalt ras and may need some parts. Can you post
the complete info for these companies please.

--
Bill Rittner
R & B ENTERPRISES



"Don't take this life too seriously.......nobody
gets out alive" (Unknown)

Remove "no" to reply
"John Pinkham" wrote in message
news:x8TRa.78037$OZ2.13785@rwcrnsc54...
The yoke lock on my 70's vintage B&D "DeWalt" radial arm saw kept
loosening.
After much fiddling, it became apparent that the adjustment washer
internal
tab had broken off. The tab rides in a groove in the king bolt.

Of course DeWalt didn't have the part, and advised me to call Wolfe
Machinery. The wanted $15 for this stamped-out sheetmetal 2" diameter
piece
and $7 for shipping a 0.5 oz. item.

I did order the part from Original Saw Company. They had a minimum $15
order
policy, but gave me a "deal" and sold the part for $10 and "a couple bucks
shipping". The total came to $17.29 as my Visa statement shows, however.

After ordering the part, I took the old washer and made a new tab on it.
This kludge worked. So if anyone is in the market for this vintage part, I
could let it go for my minimum order fee of $100 plus S&H, and applicable
municipal, county, and state taxes, of course.

John Pinkham