Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 42
Default accident waiting to happen

Hi Guys, I was busy with my eldest son (23) cutting some wide and long wood
on my Inca Major saw table, I opened up the slide top to give me a bit more
support, everything went great until I was finished sawing, my son who
thought he was doing dad a favour, proceeded with great force to slide the
top closed (while I was cleaning the table) without warning me! and yep the
result one broken and crushed left hand ring finger! the lesson to be
learned here is Communication! it did prove one thing though, he can run
faster than I can!
Eddie...


  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 714
Default accident waiting to happen

Eddie wrote:
Hi Guys, I was busy with my eldest son (23) cutting some wide and long wood
on my Inca Major saw table, I opened up the slide top to give me a bit more
support, everything went great until I was finished sawing, my son who
thought he was doing dad a favour, proceeded with great force to slide the
top closed (while I was cleaning the table) without warning me! and yep the
result one broken and crushed left hand ring finger! the lesson to be
learned here is Communication! it did prove one thing though, he can run
faster than I can!
Eddie...


Nothing runs faster than the Last Will and Testament...
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 300
Default accident waiting to happen

We recently helped our son finish his house in Southern Missouri. He is a
construction superintendent and some of his employees and construction
friends helped with the project. I was astounded (read horrified) at the
way these guys and some of the subs use power tools. For one thing nearly
all (except our son) thought the table saw fence and miter gauge were
optional for nearly anything but ripping.

The two young bucks who installed the cabinets were fast, accurate and
virtually mindless in the way they used their circular and miter saws. I
couldn't believe the number of times I watched one of them line up a cut on
the miter saw and slam the blade down while looking in another direction.

On one occasion one of the installers was kneeling on a counter-top
preparing to cut off a piece of MDF with a circular saw. Instead of taking
a moment to reposition his body he reached behind himself to cut off the
piece with a one-handed swipe. The weight of the saw was obviously over
balancing his body. These guys were emergency room fodder.

On the other hand, I saw a video of Sam Maloof suspending a piece of long,
walnut stock between his hip and outstretched hand while rounding it with a
router. The Modern Masters commentator mentioned that was not a
conventional shop practice. Sam grinned and admitted that they go through a
few band-aids in the shop.

RonB


"Eddie" wrote in message
. nl...
Hi Guys, I was busy with my eldest son (23) cutting some wide and long
wood on my Inca Major saw table, I opened up the slide top to give me a
bit more support, everything went great until I was finished sawing, my
son who thought he was doing dad a favour, proceeded with great force to
slide the top closed (while I was cleaning the table) without warning me!
and yep the result one broken and crushed left hand ring finger! the
lesson to be learned here is Communication! it did prove one thing though,
he can run faster than I can!
Eddie...



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Look that happen in Cuba!!!!! [email protected] Electronics Repair 4 August 6th 06 11:02 PM
Look that happen in Cuba!!!!! [email protected] Home Repair 1 August 1st 06 05:24 PM
"When stains happen" [email protected] Home Repair 0 February 24th 05 03:54 AM
Waiting, waiting, waiting; I'm always waiting for something! Bay Area Dave Woodworking 10 December 6th 03 04:20 AM
Cheap import tools and product liability (was: Violent Electric Drill Accident) Richard J Kinch Metalworking 33 July 21st 03 05:15 PM


All times are GMT +1. The time now is 08:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"