DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   harbor freight 18v drill (https://www.diybanter.com/woodworking/178069-harbor-freight-18v-drill.html)

nutso fasst October 3rd 06 11:40 PM

harbor freight 18v drill
 
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?

nf






boorite October 4th 06 12:46 AM

harbor freight 18v drill
 

nutso fasst wrote:
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?


I looked at one in person last weekend and was able to resist the
temptation. It's the blue DrillMaster brand. All I know about that name
is that I gambled a couple bucks on a set of DM hole saws that are
pretty damn crappy. Next time I wanted a hole saw, I bought a good
bi-metal one in the size I needed. So to me, "DrillMaster" translates
to "sucks a big wagon of ass."

But so far I'm happy with other stuff I've got from HF-- clamps, a CMS,
a baby drill press, a biscuit joiner, chisels, gouges, many odds n
ends....


Jesse R Strawbridge October 4th 06 01:43 AM

harbor freight 18v drill
 
boorite wrote:
nutso fasst wrote:

I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?



I looked at one in person last weekend and was able to resist the
temptation. It's the blue DrillMaster brand. All I know about that name
is that I gambled a couple bucks on a set of DM hole saws that are
pretty damn crappy. Next time I wanted a hole saw, I bought a good
bi-metal one in the size I needed. So to me, "DrillMaster" translates
to "sucks a big wagon of ass."

But so far I'm happy with other stuff I've got from HF-- clamps, a CMS,
a baby drill press, a biscuit joiner, chisels, gouges, many odds n
ends....

I have several Chicago 18V drills (orange) from HF that I like and use
all the time. Of course, on sale they are $40 and normally about $70.

The DrillMaster drills have all ways looked like junk.

Jess.S

Dennis October 4th 06 02:55 AM

harbor freight 18v drill
 
I have bought dozens of HF items and most have been satisfactory and some a
darn good buy. But my experience with their 14v version of this drill
several years ago was terrible. Cheap chargers, no regulation, poor
connection, and the battery was good for about 3 or 4 charges before they
died. Gave them away at a garage sale.....all 3 of them.... I bought 3
because the whole drill on sale was cheaper than spare batteries! Save your
money on this one


Dennis Slabaugh
Hobbyist Woodworker

www.woodworkinghobby.com




"Jesse R Strawbridge" wrote in message
.. .
boorite wrote:
nutso fasst wrote:

I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?



I looked at one in person last weekend and was able to resist the
temptation. It's the blue DrillMaster brand. All I know about that name
is that I gambled a couple bucks on a set of DM hole saws that are
pretty damn crappy. Next time I wanted a hole saw, I bought a good
bi-metal one in the size I needed. So to me, "DrillMaster" translates
to "sucks a big wagon of ass."

But so far I'm happy with other stuff I've got from HF-- clamps, a CMS,
a baby drill press, a biscuit joiner, chisels, gouges, many odds n
ends....

I have several Chicago 18V drills (orange) from HF that I like and use all
the time. Of course, on sale they are $40 and normally about $70.

The DrillMaster drills have all ways looked like junk.

Jess.S




Toller October 4th 06 04:31 AM

harbor freight 18v drill
 

"boorite" wrote in message
oups.com...

nutso fasst wrote:
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?


I looked at one in person last weekend and was able to resist the
temptation. It's the blue DrillMaster brand. All I know about that name
is that I gambled a couple bucks on a set of DM hole saws that are
pretty damn crappy. Next time I wanted a hole saw, I bought a good
bi-metal one in the size I needed. So to me, "DrillMaster" translates
to "sucks a big wagon of ass."

I have a set of Harbor Freight hole saws. A couple years ago I used one to
cut a hole in my breaker box. It took a while, but it worked. Not too
shabby, considering the price.



Jimmy October 4th 06 07:00 AM

harbor freight 18v drill
 
My brother bought me the 18v drill and it sucked! Drill? No way. Would not
drive a screw. I have the D.C. from them and it's great. The drill really
sucks.

"boorite" wrote in message
oups.com...

nutso fasst wrote:
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?


I looked at one in person last weekend and was able to resist the
temptation. It's the blue DrillMaster brand. All I know about that name
is that I gambled a couple bucks on a set of DM hole saws that are
pretty damn crappy. Next time I wanted a hole saw, I bought a good
bi-metal one in the size I needed. So to me, "DrillMaster" translates
to "sucks a big wagon of ass."

But so far I'm happy with other stuff I've got from HF-- clamps, a CMS,
a baby drill press, a biscuit joiner, chisels, gouges, many odds n
ends....




Morris Dovey October 4th 06 01:07 PM

harbor freight 18v drill
 
Jesse R Strawbridge (in )
said:

| I have several Chicago 18V drills (orange) from HF that I like and
| use all the time. Of course, on sale they are $40 and normally
| about $70.

Me too. I have one tailed 3/8" that's used almost exclusively for
pocket joinery drilling and one rechargable 3/8" that's used for
driving the screws. Bought 'em both on sale about three years ago. I'm
not partial to keyless chucks; but I'd buy either of these again. I
figure they'd paid for themselves sever times over the first year of
use - and they're still going strong.

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto



Vic Baron October 4th 06 05:35 PM

harbor freight 18v drill
 

"nutso fasst" wrote in message
et...
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?

nf


I bought 3 of them a while back - cheaper than spare battery. Haven't had a
problem. Drive a lot of square drive screws with no problem. On the occasion
when I've used them as a drill, I've had no complaints. Battery doesn't seem
to last as long as "branded" items but at that price, who cares?

There's no "quick" recharge and it takes about 5 hours to recharge ( that's
also why I bought 3 of them ) and the charger does NOT shut down
automatically when the battery has been recharged. That's the only thing I
really don't like about it but it's not too hard to set a timer to remind
me.

Would they last day in and day out on a construction job site? I seriously
doubt it but for home workshop use it's a good deal.

Just MHO.

Vic



bob October 4th 06 05:40 PM

harbor freight 18v drill
 
If it seems too good to be true, it probably is. Here in Canada, Canadian
Tire sells a Chinese brand called Jobmate. They make power and hand tools,
and the prices are unbelievably low. The quality is even lower. Calling them
crap would be a compliment. Buyer beware.

--

Bob

Travel and Astronomy Photos
http://www3.sympatico.ca/bomo



"nutso fasst" wrote in message
et...
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?

nf








nutso fasst October 4th 06 09:18 PM

harbor freight 18v drill
 

"Vic Baron" wrote in message
et...
I bought 3 of them a while back - cheaper than spare battery. Haven't had

a
problem. Drive a lot of square drive screws with no problem. On the

occasion
when I've used them as a drill, I've had no complaints. Battery doesn't

seem
to last as long as "branded" items but at that price, who cares?


Compared Drill Master torque to two others: (1) Kawasaki 19.2V (kit w/light,
$40 at Pep Boys) is 300in/lb. (2) Milwaukee 18V (~$140 online) is 495in/lb.
I tried to find torque numbers for two other cheapies - Hyundai 18V and
Coleman 18V - but no luck.

Glad you're satisfied, but it seems 35in/lb classifies the DM as an
oversized powered screwdriver, not suitable for drilling studs for 3/8" lag
bolts.

The



Vic Baron October 4th 06 09:28 PM

harbor freight 18v drill
 

"nutso fasst" wrote in message
m...

"Vic Baron" wrote in message
et...
I bought 3 of them a while back - cheaper than spare battery. Haven't had

a
problem. Drive a lot of square drive screws with no problem. On the

occasion
when I've used them as a drill, I've had no complaints. Battery doesn't

seem
to last as long as "branded" items but at that price, who cares?


Compared Drill Master torque to two others: (1) Kawasaki 19.2V (kit
w/light,
$40 at Pep Boys) is 300in/lb. (2) Milwaukee 18V (~$140 online) is
495in/lb.
I tried to find torque numbers for two other cheapies - Hyundai 18V and
Coleman 18V - but no luck.

Glad you're satisfied, but it seems 35in/lb classifies the DM as an
oversized powered screwdriver, not suitable for drilling studs for 3/8"
lag
bolts.

The



Considering the way the Taiwanese or Chinese manuals are prepared I'd be
more inclined to believe the manual was in error. I've drilled some fairly
large holes with them with no problem. Caveat - I haven't drilled a lot of
large holes at one time though. At that price, I'm not concerned - I do
believe you get what you pay for but this is more than adequate for my needs
so it's a good buy - to me. YMMV

Vic



October 5th 06 12:24 AM

harbor freight 18v drill
 
In article ,
nutso fasst wrote:

"Vic Baron" wrote in message
. net...
I bought 3 of them a while back - cheaper than spare battery. Haven't had

a
problem. Drive a lot of square drive screws with no problem. On the

occasion
when I've used them as a drill, I've had no complaints. Battery doesn't

seem
to last as long as "branded" items but at that price, who cares?


Compared Drill Master torque to two others: (1) Kawasaki 19.2V (kit w/light,
$40 at Pep Boys) is 300in/lb. (2) Milwaukee 18V (~$140 online) is 495in/lb.
I tried to find torque numbers for two other cheapies - Hyundai 18V and
Coleman 18V - but no luck.

Glad you're satisfied, but it seems 35in/lb classifies the DM as an
oversized powered screwdriver, not suitable for drilling studs for 3/8" lag
bolts.

The



If you RTFM a litle more closely you'll see that the 35 in-lb figure
is the maximum CLUTCHED torque. It's not as explicit as it could be,
but on the next setting, the clutch is locked and will not slip. The
manual for this particular model does not list a maximum torque but
similar 18V drills sold by Harbor Freight vary from 100 - 180 that I
have seen. I purchased 2 of their 18V Drillmaster drills some time ago
when they were on sale for $9.99. Not sure if they are the same model
under discussion here.

I have a Dewalt 18V drill and of course it is beyond comparison in
brute force to the DM, but then again, retail on the Dewalt is about
15 times the price. I use the drillmasters very frequently and I don't
mind lending them out which I would never do with the Dewalt.
(Actually, I own _2_ Dewalts and I did lend one of them out once, and
because of what happened I won't lend out the other, but that's a
different story.)

At any rate, the Drillmaster is not near as poweful as a Dewalt or
name brand, the batteries don't last as lone, etc, but are they worth
$10 or $15? Absolutely. Despite their lower power output they are just
as efficient as my Dewalt at snapping off the heads of cheap drywall
screws, ruining cheap driver tips in good quality screws, burying
screws much deeper than I intended, or stripping out the threads
in pine, fir, and other softwoods.
--
No dumb questions, just dumb answers.
Larry Wasserman - Baltimore, Maryland -

boorite October 6th 06 06:21 PM

harbor freight 18v drill
 

wrote:
Despite their lower power output they are just
as efficient as my Dewalt at snapping off the heads of cheap drywall
screws, ruining cheap driver tips in good quality screws, burying
screws much deeper than I intended, or stripping out the threads
in pine, fir, and other softwoods.


Good to know, since that's mainly the type of work I do.


J. Clarke October 14th 06 02:48 PM

harbor freight 18v drill
 

"nutso fasst" wrote in message
et...
I was tempted by the $15.99 price. How bad can it be? Well, according the
downloadable manual, the torque settings range from 16in/lb to 35in/lb
(+-2in/lb).
What could it possibly drill - cardboard?


What do the torque settings have to do with drilling? You lock the slip
clutch to drill.



Puckdropper October 16th 06 07:47 PM

harbor freight 18v drill
 
"J. Clarke" wrote in
:



What do the torque settings have to do with drilling? You lock the
slip clutch to drill.




As I understand it, torque is a measure of how much force something
rotating exerts on a material. If you're drilling, too low torque of
will stop the drill in the hole. You'll probably not notice anything
with a 1/8" bit, but get to the larger sizes like 1/4" and 1/2" and
suddenly you realize how good or bad your drill is.

Puckdropper
--
Wise is the man who attempts to answer his question before asking it.

To email me directly, send a message to puckdropper (at) fastmail.fm


All times are GMT +1. The time now is 01:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter