Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
I just went on the sears website to see if I could find blades for this
old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? |
#2
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"stryped" wrote in message ups.com... I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? You should feel comfortable with the purchase you make at the time you make it. Don't worry or anguish over what you will find in the future as you will always find a better deal. Waiting for the "very best" deal will always cause you to miss out on something you can be enjoying now. |
#3
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
I would put the old one on Craigslist (or similar) for $75 and buy one that
works; either the Craftsman for $300 or a used one for $200. But that is what I would do. What you should do might be entirely different. Having you around is great; you are like the little idiot brother I never had. |
#4
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
Hey Stryped,
Don't feel sick, finish rehabbing the jointer you have and subtract the cost of its refurbishing from the $239. Then buy that much lumber. You'll be so much happier with the final outcome. Marc stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? |
#5
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
Toller wrote:
Having you around is great; you are like the little idiot brother I never had. Uncalled for. How can you have a brother you never had? -- Sir Benjamin Middlethwaite |
#6
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"The3rd Earl Of Derby" wrote in message . uk... Toller wrote: Having you around is great; you are like the little idiot brother I never had. Uncalled for. Have you read his posts over the last month? How can you have a brother you never had? "Like". English not your native language? |
#7
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
On 20 Sep 2006 06:00:38 -0700, stryped wrote:
I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Seems to me, you'd be better off with the one you have. First, because you have it. Second, because you're going to learn quite a bit about what a jointer is, how it works, and how to maintain it, by getting it into working order. That's valuable knowledge, gained at relatively low financial risk. -- Art Greenberg artg at eclipse dot net |
#8
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Nobody here can tell you what to do, you'll have to make that decision yourself. Somebody else noted there's a lot of value in learning something about refurbishing old equipment--assuming, of course, you're interested enough in woodworking that you're going to continue to do some. For me, there's far more pleasure in getting something back in shape than just buying a new gew-gaw, but that's me. As for knives for this machine, you can measure the knives you have and any knife of the same length, width and thickness (VERY important!) will be fine. Sears, in general, would be about the last place I'd go looking for tooling. As noted in other response, unless these knives are in very poor shape, resharpening them would be my first choice. |
#9
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
On 20 Sep 2006 06:00:38 -0700, "stryped" wrote:
I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Depending on how old your machine is, my guess is though it might not be hi-tech or whatever, it's probably better built than a new one and has a lot more steel in it... You might consider your restore as gained knowledge that you'll have if you have a problem with the machine later, as opposed to having to learn to troubleshoot/fix the new one later... Mac https://home.comcast.net/~mac.davis https://home.comcast.net/~mac.davis/wood_stuff.htm |
#10
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
Where would be the best place if not sears to buy knives at a good
price? dpb wrote: stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Nobody here can tell you what to do, you'll have to make that decision yourself. Somebody else noted there's a lot of value in learning something about refurbishing old equipment--assuming, of course, you're interested enough in woodworking that you're going to continue to do some. For me, there's far more pleasure in getting something back in shape than just buying a new gew-gaw, but that's me. As for knives for this machine, you can measure the knives you have and any knife of the same length, width and thickness (VERY important!) will be fine. Sears, in general, would be about the last place I'd go looking for tooling. As noted in other response, unless these knives are in very poor shape, resharpening them would be my first choice. |
#11
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
On Wed, 20 Sep 2006 14:00:46 GMT, "Toller" wrote:
"The3rd Earl Of Derby" wrote in message .uk... Toller wrote: Having you around is great; you are like the little idiot brother I never had. Uncalled for. Have you read his posts over the last month? At least he's not giving electrical advice. -- LRod Master Woodbutcher and seasoned termite Shamelessly whoring my website since 1999 http://www.woodbutcher.net Proud participant of rec.woodworking since February, 1997 email addy de-spam-ified due to 1,000 spams per month. If you can't figure out how to use it, I probably wouldn't care to correspond with you anyway. |
#12
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
In article . com, "stryped" wrote:
Where would be the best place if not sears to buy knives at a good price? http://www.google.com Sheesh. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
#13
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"LRod" wrote in message ... On Wed, 20 Sep 2006 14:00:46 GMT, "Toller" wrote: "The3rd Earl Of Derby" wrote in message o.uk... Toller wrote: Having you around is great; you are like the little idiot brother I never had. Uncalled for. Have you read his posts over the last month? At least he's not giving electrical advice. ???? |
#14
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"stryped" wrote:
I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? I'd say keep the old one. 1) Why new knives? I was surprised at how reasonable they were to sharpen when I ruined mine by running plywood edges through. Seems like they charged $0.50 per inch, or $9 for a set of 6" knives. 2) A link belt is not very expensive. Not sure why you are using a belt the wrong size. 3) Get a guard. How does it mount? Unless it is a unique design for Sears, you should be able to find one that works. 4) Align the tables and you will be good to go, for a lot less money than new. -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#15
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
I am not sure how the guard mounts. Where can I find a replacement?
Here is a picture of a similar jointer. http://www.owwm.com/PhotoIndex/detail.asp?id=1546 WHat do you think? Problem with blades is mine look like someone has tried to regrind them. I cant tell what the origional angle was supposed to be. Looks like it maybe has two angles? alexy wrote: "stryped" wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? I'd say keep the old one. 1) Why new knives? I was surprised at how reasonable they were to sharpen when I ruined mine by running plywood edges through. Seems like they charged $0.50 per inch, or $9 for a set of 6" knives. 2) A link belt is not very expensive. Not sure why you are using a belt the wrong size. 3) Get a guard. How does it mount? Unless it is a unique design for Sears, you should be able to find one that works. 4) Align the tables and you will be good to go, for a lot less money than new. -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#17
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
alexy wrote in
: *snip* 1) Why new knives? I was surprised at how reasonable they were to sharpen when I ruined mine by running plywood edges through. Seems like they charged $0.50 per inch, or $9 for a set of 6" knives. *snip* There's a cutlery place in our local mall that does knife sharpening. They're about $1 per inch (from what the guy told me) but if you've got a good set of knives it's well worth the price. Puckdropper -- Wise is the man who attempts to answer his question before asking it. To email me directly, send a message to puckdropper (at) fastmail.fm |
#18
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? To me, it's not either/or. I'd get the new one, set it up, and run some boards on it. Then I'd refurb the old one and see if I could make it work just as well. Either way, I should end up with at least one good jointer and maybe one to sell, and along the way I'll have learned all about jointers for very low tuition. If you want to joint today, get the new one. If you want to mess around with a machine and see what happens, keep the old one. If you want both, do both. If you only want to joint, get the new one and sell the old one, or part it out, or turn it into a conceptual lawn sculpture. One way I learn about any item-- not just tools-- is by trying an ostenbsibly crummy one next to an ostensibly good one. Sometimes the difference is negligible for my purposes. Sometimes it's night and day. Either way, lesson learned. |
#19
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"The3rd Earl Of Derby" wrote in news:wnbQg.22022$r61.5681
@text.news.blueyonder.co.uk: Toller wrote: Having you around is great; you are like the little idiot brother I never had. Uncalled for. How can you have a brother you never had? Simple, the mother has a baby. At that point, it's a brother or sister that the person has now that they never had before. Puckdropper -- Wise is the man who attempts to answer his question before asking it. To email me directly, send a message to puckdropper (at) fastmail.fm |
#20
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"Toller" wrote in message ... SNIP Having you around is great; you are like the little idiot brother I never had. Must be great to feel so superior to others.You must really feel like you are a king because you don't ask for advice instead of jumping head long into a decision you might regret. To have so much extra money that researching before you make a purchase is unnecessary. The world has truly blessed you. Puff |
#21
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
On Wed, 20 Sep 2006 13:26:36 GMT, "Toller" wrote:
Having you around is great; you are like the little idiot brother I never had. Saved your parents the embarassment of spawning 2 idiots. |
#22
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
I actually like working on machines like this but it would bother me if
I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! dpb wrote: stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Nobody here can tell you what to do, you'll have to make that decision yourself. Somebody else noted there's a lot of value in learning something about refurbishing old equipment--assuming, of course, you're interested enough in woodworking that you're going to continue to do some. For me, there's far more pleasure in getting something back in shape than just buying a new gew-gaw, but that's me. As for knives for this machine, you can measure the knives you have and any knife of the same length, width and thickness (VERY important!) will be fine. Sears, in general, would be about the last place I'd go looking for tooling. As noted in other response, unless these knives are in very poor shape, resharpening them would be my first choice. |
#23
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"stryped" wrote:
I actually like working on machines like this but it would bother me if I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! As several people have indicated, you really need to get familiar with googleg. http://www.grizzly.com/products/g9849 $22.25 -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#24
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
In article .com, "stryped" wrote:
I actually like working on machines like this but it would bother me if I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! http://www.google.com You can *easily* find many sources of dial indicators for a lot less than that. -- Regards, Doug Miller (alphageek at milmac dot com) It's time to throw all their damned tea in the harbor again. |
#25
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
Thanks for that! I just wish I could find that price locally. I would
like to set up this weekend or so. Does Grizzley have fast shipping for you guys who order form there? alexy wrote: "stryped" wrote: I actually like working on machines like this but it would bother me if I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! As several people have indicated, you really need to get familiar with googleg. http://www.grizzly.com/products/g9849 $22.25 -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#26
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
But at some point, you're going to want to set the blades on a new jointer
anyway. So it's not like that money's wasted. You can also use the dial indicator and base for setting up other tools, like saws, as well as measuring run-out on things that spin around (routers, drill presses, etc), preferably with the power off. One of your first issues is going to Sears to buy tools and tool accessories. For example, go to www.amazon.com, and type in "dial indicator" as a search item. It will come up with a ton of options, starting at $20 for both the indicator and magnetic base. I think the Starrett was $150, though, so save your pennies. Here's my other thought. I wouldn't pay anything for a new tool with the "Craftsman" name on it. I know, it seems like they've got some decent tablesaws now, and they've probably got some other gems in their pile of stuff. And yes, it seems like some of the previously "good" brands turn out more lemons now than they used to. But that's my personal opinion. Having said that, the $50 you spent on the second-hand Craftsman didn't seem like a bad investment, although I probably wouldn't have done it. $50 on an old Jet or Delta, yeah, no problem. But not a Craftsman. Difficulty in finding parts and consumables, lack of specific knowledge on the Internet, etc would have dissuaded me. On the plus side, you probably can't lose too much money on the purchase. If you get it up and running, you should be able to re-coup any expenses (original purchase + reasonable parts) if you decide you need to get rid of it later. Same can't be said for the new jointer, I don't think. So I'd stick with the old one for now, plug away on it for awhile, see if you can get it working. Clint "stryped" wrote in message oups.com... I actually like working on machines like this but it would bother me if I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! dpb wrote: stryped wrote: I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Nobody here can tell you what to do, you'll have to make that decision yourself. Somebody else noted there's a lot of value in learning something about refurbishing old equipment--assuming, of course, you're interested enough in woodworking that you're going to continue to do some. For me, there's far more pleasure in getting something back in shape than just buying a new gew-gaw, but that's me. As for knives for this machine, you can measure the knives you have and any knife of the same length, width and thickness (VERY important!) will be fine. Sears, in general, would be about the last place I'd go looking for tooling. As noted in other response, unless these knives are in very poor shape, resharpening them would be my first choice. |
#27
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
I don't know where you live, but here (Edmonton, AB, Canada, population
about 1,000,000), I can look in the phone book and find a good dozen places that sell tools and accessories, and most of their stuff would be less than Sears. More knowledgeable staff, too. Even in the town I lived in before (population 100,000), there was at least 4 tool places that I could wander in and around on a Saturday morning. Your questions about whether Grizzly has fast shipping could be best answered by going to the Grizzly website (which someone gave to you) and/or phoning their 1-800 number. Clint "stryped" wrote in message oups.com... Thanks for that! I just wish I could find that price locally. I would like to set up this weekend or so. Does Grizzley have fast shipping for you guys who order form there? alexy wrote: "stryped" wrote: I actually like working on machines like this but it would bother me if I spent alot of time and it still did not cut as good as that new one. Also, It is easy to spend omoney on tools, etc more than the cost of a new one. For example, been reading a dial indicator is the best way to set blades. They are 34 bucks at sears. The magnetic base for it is 44. That adds up quick! As several people have indicated, you really need to get familiar with googleg. http://www.grizzly.com/products/g9849 $22.25 -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#28
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
Clint wrote: Here's my other thought. I wouldn't pay anything for a new tool with the "Craftsman" name on it. Ask the cashier to pry the nameplate off for you. |
#29
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
stryped wrote:
I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? Facts... 1. You paid $50 for the old one (?) 2. It needs knives (and cutter head?) 3. It needs a guard 4. You indicate that the tables need some work Supposition... 1. The old one *may* be built like a brick, errrr...house Rhetorical questions... 1. How good is the new one for $239? (looks OK from photo) 2. Why was the price reduced by 40%? (Supplanted by a newer model, looks like.) What to do... 1. If you buy the new one and junk the old one, your total cost is $289 and you save a bunch of time messing with the old one. You could also fix the old one and sell it for more than you paid *IF* you get it functional without spending major money. 2. If you decide to fix the old and not buy the new you are faced with unknown costs and time and the possibility of still not having a machine you are happy with. Given the above, I'd buy the new and spend a bit of time trying to fix the old. If time and/or costs got excessive - or if I ran into unsuspected, major problems - I'd junk it. Given your obsession over joining for lo these many weeks that is what I would suggest for you even though you could use your router and make perfectly lovely straight edges on boards. -- dadiOH ____________________________ dadiOH's dandies v3.06... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
#30
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
stryped (in )
said: | I just went on the sears website to see if I could find blades for | this old jointer. I saw on clearance a jointer on clearance for | 239. It was before 399.99. It can be shipped to the store for free. | | I wish I had known about this before I bought this old one. Should I | keep going on trying to get this old one going with new knives, | belt, etc or shoudl I cut my losses? Will I be as happu with this | old jointer as the new one? Older /might/ be /better/. If you'd waited long enough, you might have found one sitting on someone's curb - though you might've had to wait for a long time. I'd stick with the one you've got unless and until it won't do the job. Will you be happy? That's pretty much under _your_ control. As one of my favorite songwriters said: "You can be happy if you've a mind to." Deciding to be happy has a lot going for it. -- Morris Dovey DeSoto Solar DeSoto, Iowa USA http://www.iedu.com/DeSoto |
#31
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"stryped" wrote in message ups.com... I just went on the sears website to see if I could find blades for this old jointer. I saw on clearance a jointer on clearance for 239. It was before 399.99. It can be shipped to the store for free. I wish I had known about this before I bought this old one. Should I keep going on trying to get this old one going with new knives, belt, etc or shoudl I cut my losses? Will I be as happu with this old jointer as the new one? You will never be happy. Better just take all those woodworking tools to the dump right now. Rumor has it that there are new saws coming out on the market, painted different colors than the previous models. If you don't get out now, you're just going to be a frustrated person. -- -Mike- |
#32
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
|
#33
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
"Mike Marlow" wrote:
You will never be happy. Better just take all those woodworking tools to the dump right now. Rumor has it that there are new saws coming out on the market, painted different colors than the previous models. If you don't get out now, you're just going to be a frustrated person. And for heaven's sake, never buy a computer! Or at least get it sent to you express, in which case you might get to use it for up to a week before the next better/cheaper model comes out. -- Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently. |
#34
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
On Wed, 20 Sep 2006 12:23:16 -0500, "Puff Griffis"
wrote: "Toller" wrote in message ... SNIP Having you around is great; you are like the little idiot brother I never had. Must be great to feel so superior to others.You must really feel like you are a king because you don't ask for advice instead of jumping head long into a decision you might regret. To have so much extra money that researching before you make a purchase is unnecessary. The world has truly blessed you. Researching...now *there's* an interesting clue for the idiot brother. -- Chuck Taylor http://home.hiwaay.net/~taylorc/contact/ |
#35
Posted to rec.woodworking
|
|||
|
|||
Man, I am sick what shoudl I do?
stryped wrote: shoudl I cut my losses? You should switch your computer off and go and fix your jointer. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Both sowing now, Karl and Lisette wandered the urban lakes near sick pen. | Woodworking |