New member with a question.
 

Hello,

I just joined DIY and I have a question on tools. I am considering
making my own and possibly selling wood guitar tuner buttons. The
problem I have is on the shaft side of the button is a 3/32" x
5/32" rectangular shaft slot with rounded ends.
http://img.photobucket.com/albums/v3...ttons-hole.jpg.
I was looking at mortising bits but they are just too big. How would
anyone go about making this hole? Thanks in advance for you help.

Dan

New member with a question.
 

Dan1954 wrote:

I just joined DIY and I have a question on tools. I am considering
making my own and possibly selling wood guitar tuner buttons. The
problem I have is on the shaft side of the button is a 3/32" x
5/32" rectangular shaft slot with rounded ends.
http://img.photobucket.com/albums/v3...ttons-hole.jpg.
I was looking at mortising bits but they are just too big. How would
anyone go about making this hole? Thanks in advance for you help.

Cutting that would be a bitch. I'd drill the hole oversize, fill it
with epoxy and use the correctly sized piece to cast the hole.

I'm not sure how much stress the tuning peg is under, but replicating
the plastic insert from that picture you linked to in epoxy would
definitely be stronger than a hole in wood and would last longer.

R

New member with a question.
 

Dan1954 wrote:
Hello,

I just joined DIY and I have a question on tools. I am considering
making my own and possibly selling wood guitar tuner buttons. The
problem I have is on the shaft side of the button is a 3/32" x
5/32" rectangular shaft slot with rounded ends.
http://img.photobucket.com/albums/v3...ttons-hole.jpg.
I was looking at mortising bits but they are just too big. How would
anyone go about making this hole? Thanks in advance for you help.

Dan

Dan, it would be hard for the wood not to split when torque was applied
to that shape of hole.
I like the round hole idea, filled with epoxy.

r

New member with a question.
 

Dan1954 wrote:
Hello,

I just joined DIY and I have a question on tools. I am considering
making my own and possibly selling wood guitar tuner buttons. The
problem I have is on the shaft side of the button is a 3/32" x
5/32" rectangular shaft slot with rounded ends.
http://img.photobucket.com/albums/v3...ttons-hole.jpg.
I was looking at mortising bits but they are just too big. How would
anyone go about making this hole? Thanks in advance for you help.

Dan

Only way I know is with a broach. This is a tapered file-like tool of
the shape you want and cuts on the inward stroke, not by turning. You
would start with a round hole and shape it with the broach.

I would go with the epoxy fill, myself.

--
Gerald Ross
Cochran, GA

A millennium is like a centennial,
only it has more legs.





----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----