DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Wax covered Mallet (https://www.diybanter.com/woodworking/172260-re-wax-covered-mallet.html)

mac davis August 12th 06 05:17 PM
Wax covered Mallet
 
On 11 Aug 2006 19:53:47 -0700, wrote:

Picked up a Harris Tools 30 oz mallet the other day, and it is covered
with
a thick coat of wax, almost like a candle wax. Wood is NOT lingum
vitea (sp) and
is tauted as being check-resistant. I know the wax is there to reduce
mositure transfer,
but should some of it be removed? Running a thumbnail across it lifts
flakes off. I'm
wondering if this would flake off and get on the wood and bench,
interfering with a
finish.

My guess is that it's to protect it until use, like grease on a gun...

I'd get rid of the wax before I used it, for sure..
Mac

https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm


All times are GMT +1. The time now is 08:20 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter