Wood glue and laminate
Any reason one should/must use contact glue to place laminate on plywood
top. No water involved. Parts could slip out of position while clamping. No matter in this case. What am I missing? |
Wood glue and laminate
Rick Samuel wrote:
Any reason one should/must use contact glue to place laminate on plywood top. No water involved. Parts could slip out of position while clamping. No matter in this case. What am I missing? Laminate a couple of dozen 4x8 sheets and you will answer your own question. On second thought, one or two might do it. Just make sure you have lots of dowel rods and a "J" roller. Lew |
Wood glue and laminate
"Rick Samuel" wrote in message ... Any reason one should/must use contact glue to place laminate on plywood top. No water involved. Parts could slip out of position while clamping. No matter in this case. What am I missing? Any reason to not use it? If you want it to stay, use contact cement. |
Wood glue and laminate
"Rick Samuel" wrote in message ... Any reason one should/must use contact glue to place laminate on plywood top. No water involved. Parts could slip out of position while clamping. No matter in this case. What am I missing? Many glues do not stick well to laminate. If it is a water based glue, the laminate will not absorb any of the moisture. Must be a reason that contact has been used for many years. . |
Wood glue and laminate
"Edwin Pawlowski" wrote in message
.com... "Rick Samuel" wrote in message ... Any reason one should/must use contact glue to place laminate on plywood top. No water involved. Parts could slip out of position while clamping. No matter in this case. What am I missing? Many glues do not stick well to laminate. If it is a water based glue, the laminate will not absorb any of the moisture. Must be a reason that contact has been used for many years. . I'd say it probably has something to with the instant bond when two surfaces with tacky contact cement come together. You can get in right away and roll the laminate flat without wondering when it will set. todd |
All times are GMT +1. The time now is 10:29 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter