3/8 in Phenolic Sheets - Router Table
 

Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and $36
sq ft at plastic suppliers is the best I can do.

3/8 in Phenolic Sheets - Router Table
 

Tom H wrote:
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and $36
sq ft at plastic suppliers is the best I can do.



The plastics supplier I deal with in my area has a scrap bin. These
cut-offs are sold by the pound. I've been able to find pieces large
enough to make my inserts from these scraps.

--
Jack Novak
Buffalo, NY - USA

(Remove -SPAM- to send email)

3/8 in Phenolic Sheets - Router Table
 

Tom H wrote:
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and $36
sq ft at plastic suppliers is the best I can do.

When you say precut, are you talking about rounded corners and holes
drilled, or just cut to the overall rectangular size? I just called a
buddy of mine who works for AIN Plastics. There's a $75 minimum, and
they'd charge you for a 12" x 12" piece, but the price per, forgetting
the minimum, is about seven or eight bucks for a square blank of 3/8"
paper based phenolic. Canvas based is more. So if you bought ten of
them to cover the minimum, maybe sell some to your buddies, that's
fairly reasonable.

Here's a guy selling sheet on eBay:
http://cgi.ebay.com/1361-PHENOLIC-3-...QQcmdZViewItem
It'd be about $40 with shipping, and you'd only get two with a fair bit
of waste.

R

3/8 in Phenolic Sheets - Router Table
 

Tom H wrote:
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and $36
sq ft at plastic suppliers is the best I can do.

Lee Valley wants $32.50 for a 16x24 sheet of 1/4".

I've had this in my table for a year now with no sagging, although I did
make the cutout for the router as small as possible to maximise support
for the insert.

Chris

3/8 in Phenolic Sheets - Router Table
 

"Tom H" wrote in message
. com...
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and
$36 sq ft at plastic suppliers is the best I can do.
If you can make do with 1/2", corian sink cutouts ought to be cheap. I got
a big pile of them for free last year. I just made a router table out of a
large sheet of corian, and it has been fine so far; should work for a
insert.

3/8 in Phenolic Sheets - Router Table
 

Buy it from somewhere like McMaster-Carr

John

On 10 Mar 2006 09:07:52 -0800, "RicodJour"
wrote:


Tom H wrote:
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and $36
sq ft at plastic suppliers is the best I can do.

When you say precut, are you talking about rounded corners and holes
drilled, or just cut to the overall rectangular size? I just called a
buddy of mine who works for AIN Plastics. There's a $75 minimum, and
they'd charge you for a 12" x 12" piece, but the price per, forgetting
the minimum, is about seven or eight bucks for a square blank of 3/8"
paper based phenolic. Canvas based is more. So if you bought ten of
them to cover the minimum, maybe sell some to your buddies, that's
fairly reasonable.

Here's a guy selling sheet on eBay:
http://cgi.ebay.com/1361-PHENOLIC-3-...QQcmdZViewItem
It'd be about $40 with shipping, and you'd only get two with a fair bit
of waste.

R

3/8 in Phenolic Sheets - Router Table
 

I was talking about the blank round cornered precuts.
Do you know if typical plates you buy from woodworking suppliers are paper
or canvas based?

----------------------------------------------------------------
"RicodJour" wrote in message
oups.com...

Tom H wrote:
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and
$36
sq ft at plastic suppliers is the best I can do.

When you say precut, are you talking about rounded corners and holes
drilled, or just cut to the overall rectangular size? I just called a
buddy of mine who works for AIN Plastics. There's a $75 minimum, and
they'd charge you for a 12" x 12" piece, but the price per, forgetting
the minimum, is about seven or eight bucks for a square blank of 3/8"
paper based phenolic. Canvas based is more. So if you bought ten of
them to cover the minimum, maybe sell some to your buddies, that's
fairly reasonable.

Here's a guy selling sheet on eBay:
http://cgi.ebay.com/1361-PHENOLIC-3-...QQcmdZViewItem
It'd be about $40 with shipping, and you'd only get two with a fair bit
of waste.

R

3/8 in Phenolic Sheets - Router Table
 

On 3/10/2006 1:25 PM Toller mumbled something about the following:
"Tom H" wrote in message
. com...
Anyone have a cheap source for 3/8 in. phenolic sheets sutable for making
router table inserts.
It seems that $35 is the going rate for precuts at woodworking sites and
$36 sq ft at plastic suppliers is the best I can do.
If you can make do with 1/2", corian sink cutouts ought to be cheap. I got
a big pile of them for free last year. I just made a router table out of a
large sheet of corian, and it has been fine so far; should work for a
insert.



I've just been told about a huge piece of corian at one of our offices
that they are throwing out. I told them to hold on to it, I'll be there
next week to pick it up. It's a pretty good size chunk and kinda
awkward shape, but I think I can get me a decent router table out of a
piece of it.

--
Odinn
RCOS #7 SENS BS ???

"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton

Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org

rot13 to reply

3/8 in Phenolic Sheets - Router Table
 

I went to my local glass company and they gave me some 3/8" Lexan
scraps for nothing. They make great custom router bases.
Bugs