Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Windows
Has anyone made their own windows for their house? Seems not too
complicated with the right molding cutters and a source for double-paned glass. Mike |
#2
Posted to rec.woodworking
|
|||
|
|||
Windows
I bought my windows from Bill Gates!
-- Stoutman http://www.garagewoodworks.com (Featuring a NEW look) |
#3
Posted to rec.woodworking
|
|||
|
|||
Windows
There is much more to windows today than just a few panes of glass and a
wood frame. Most modern windows have (at least) two panes of glass separated by an argon gas filled space. This creates a real good thermal barrier that saves money on heating/cooling costs. Moreover, most modern windows have a silver coating on the glass (called LoE or LoE2) which is a coating that filters UV rays. If your looking for a way to save money, building your own windows is definately not the way to do it. However, if your looking to make some replacement windows to keep your century home as authentic as possible then go for it, simple double hung windows are not much more difficult to make than cabinet oors. --dave wrote in message oups.com... Has anyone made their own windows for their house? Seems not too complicated with the right molding cutters and a source for double-paned glass. Mike |
#4
Posted to rec.woodworking
|
|||
|
|||
Windows
stoutman wrote:
I bought my windows from Bill Gates! 'Swhy the lock's on the outside. er -- email not valid |
#5
Posted to rec.woodworking
|
|||
|
|||
Windows
The Vista beta version has no glass in them.
On Sat, 11 Mar 2006 05:07:15 -0000, Enoch Root wrote: stoutman wrote: I bought my windows from Bill Gates! 'Swhy the lock's on the outside. er -- %69%20%6c%6f%76%65%20%77%6f%6f%64%77%6f%72%6b%69%6 e%67%20%62%75%74%20%69%6d%20%63%72%61%70 http://www.connoraston.com |
#6
Posted to rec.woodworking
|
|||
|
|||
Windows
|
#7
Posted to rec.woodworking
|
|||
|
|||
Windows
stoutman (in ) said:
| I bought my windows from Bill Gates! So did I - but they all turned blue... :-( -- Morris Dovey DeSoto Solar DeSoto, Iowa USA http://www.iedu.com/DeSoto |
#8
Posted to rec.woodworking
|
|||
|
|||
Windows
On 3/11/2006 6:30 AM Mike Marlow mumbled something about the following:
-- %69%20%6c%6f%76%65%20%77%6f%6f%64%77%6f%72%6b%69%6 e%67%20%62%75%74%20%69%6d% 20%63%72%61%70 Conner - I have to ask... what's the deal with the sig line? It's URL encoding of "i love woodworking but im crap..." and yes, it is kinda annoying. -- Odinn RCOS #7 SENS BS ??? "The more I study religions the more I am convinced that man never worshiped anything but himself." -- Sir Richard Francis Burton Reeky's unofficial homepage ... http://www.reeky.org '03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide '97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic Atlanta Biker Net ... http://www.atlantabiker.net Vulcan Riders Assoc . http://www.vulcanriders.org rot13 to reply |
#9
Posted to rec.woodworking
|
|||
|
|||
Windows
I'm in the process now of making two custom-sized 6-over-6 windows to
replace a couple of damaged windows in my c. 1830s colonial. Although construction of these old windows is fairly simple (i.e flat sides in the stiles that run in flat runners in the window case), I was quoted about $500-$600 per window to have them built. I nearly choked at the quote and figured I could do this. Windows are a first for me and I'm looking forward to the challenge. After all, I did build a new exterior door with pegged mortise & tenons and 6 raised panels that I (and more importantly, my wife) was quite pleased with. I bought the Whiteside window sash bit #6050. Also bought a a 13' long board of 6/4 x 6" quarter-sawn western red cedar for about $56. Should be plenty of wood for both windows and allowing plenty extra for mistakes. Have already planed down & cut some scrap pine to size and after about an hour of trial & error adjusting, I have perfect fitting copes on the rails to match the stile pattern. They are now my set-up jigs. Mullions are next. Off to the workshop now to finish the test window. Joe T |
#10
Posted to rec.woodworking
|
|||
|
|||
Windows
"Mike Marlow" wrote in message
-- %69%20%6c%6f%76%65%20%77%6f%6f%64%77%6f%72%6b%69%6 e%67%20%62%75%74%20%69%6d% 20%63%72%61%70 Conner - I have to ask... what's the deal with the sig line? It's hex notation for: "i love woodworking but im crap" -- www.e-woodshop.net Last update: 12/13/05 |
#11
Posted to rec.woodworking
|
|||
|
|||
Windows
wrote in message oups.com... Has anyone made their own windows for their house? Seems not too complicated with the right molding cutters and a source for double-paned glass. Mike I made mine. Vertical grain fir. CMT window set. Pretty easy but I did make larger/longer tenons for strength. http://www.teamcasa.org/workshop/images/windows1.jpg Dave Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#12
Posted to rec.woodworking
|
|||
|
|||
Windows
On Sat, 11 Mar 2006 09:27:44 +0000 (UTC), "Connor Aston"
wrote: The Vista beta version has no glass in them. Maybe not, but I'll bet they are still brittle. ;-) On Sat, 11 Mar 2006 05:07:15 -0000, Enoch Root wrote: stoutman wrote: I bought my windows from Bill Gates! 'Swhy the lock's on the outside. er +--------------------------------------------------------------------------------+ If you're gonna be dumb, you better be tough +--------------------------------------------------------------------------------+ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Windows | Home Repair | |||
Vinyl Windows - Am I getting ripped off? | Home Repair | |||
LCD film window coverings? | Home Ownership | |||
Need advice on drafty wood windows | Home Ownership | |||
[OT] Car insurance craziness | UK diy |