Anyone know of custom made router bits...
 

I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a
rosette cutter for quarter circle pieces.

there is a company locally that charges a 200.00 setup fee to make the
straight molding, plus an extra charge per foot, and they won't hold
the blades for your pattern, so if you decide you need more at a later
date, you're out for another 200.00.

advice?

Anyone know of custom made router bits...
 

"my" wrote in message
oups.com...
I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a
rosette cutter for quarter circle pieces.

www.ridgecarbidetool.com is one. Depending on the size, you may be better
off with a shaper, but they can do those also.

Anyone know of custom made router bits...
 

"my" writes:

I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a

Use the old fashioned way in your ould house:
http://www.geocities.com/plybench/scratch.html

--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23

Anyone know of custom made router bits...
 

Same thing for me... couldn't (easily) make apron mould under windows.
DAGS... and tried Orbit tool. Very helpful folks! They started with a
rough sketch I made in OpenOffice, CAD-ized it, and sent back a 3D
rendering for my approval. About $150, IIRC.

HTH.
/dev

Anyone know of custom made router bits...
 

"my" wrote in message
oups.com...
I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a
rosette cutter for quarter circle pieces.

there is a company locally that charges a 200.00 setup fee to make the
straight molding, plus an extra charge per foot, and they won't hold
the blades for your pattern, so if you decide you need more at a later
date, you're out for another 200.00.

If you do a search you can find a post I made about two months ago. I found
someone to make custom router bits for IIRC $160, and posted his name in any
one was interested. My need didn't materialize, so I can't say how good his
is.

Anyone know of custom made router bits...
 

While this sounds like a great project, creating
any real quantity of molding with a router setup
is "not" a great idea.

You would need a VERY large router and a power feeder
if you have any hope of producing any real volume of
molding. I doubt any current production router is up
to the job. The feeder is required is produce a long
continuous piece of molding.


The millwright shop is a "much" better idea or depending
on how much you need, find a current stock piece and
replace all the molding.

Custom molding is not for the faint of heart or wallet.

OR

Buy yourself a W&H molder and make your very own.
(just like old Norm's)

http://www.redmond-machinery.com/w&h.htm

Of course you will also need lots of very straight and
flat material to run through this machine.

Of course all that material would have to be machined
to correct sizes(think...lots of waste)

I would either "pay up" or "replace with somthing else".

PS:

There are "many" molding that would be either exact or
very close to what you have if you really start looking.

Most molding can be made with a few very basic bits and
a good table saw.


Start he

http://winkomni.u45.websitesource.ne...2/merchant.mvc






my wrote:

I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a
rosette cutter for quarter circle pieces.

there is a company locally that charges a 200.00 setup fee to make the
straight molding, plus an extra charge per foot, and they won't hold
the blades for your pattern, so if you decide you need more at a later
date, you're out for another 200.00.

advice?

Anyone know of custom made router bits...
 

How much more do you want to make?

We bought a new old house in June. It's got really nice, but quite simple
1950s molding and baseboards. Some of the baseboard pieces are 16 feet long,
and all are based on 3/4" hardwood. (They don't make 'em like they used to)
No chance of finding anything close to it. I used a combination of router
bits and some shaping with a plane, and was able almost perfectly reproduce
the 30 or so feet I needed to replace. I wouldn't want to do tons more than
that, but it worked out alright for that quantity.


--
Bob

Travel and Astronomy Photos
http://www3.sympatico.ca/bomo




"my" wrote in message
oups.com...
I have an old house with unique, but simple profile, molding and
quarter circle pieces at the corners.

I'm wondering if anyone knows if it's possible to get a large bit made
that I can mount on my router table that I could use to make more of
the straight molding? I'd also like to to find a source to make a
rosette cutter for quarter circle pieces.

there is a company locally that charges a 200.00 setup fee to make the
straight molding, plus an extra charge per foot, and they won't hold
the blades for your pattern, so if you decide you need more at a later
date, you're out for another 200.00.

advice?