DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   scroll saw alternatives (https://www.diybanter.com/woodworking/141952-scroll-saw-alternatives.html)

[email protected] January 25th 06 09:11 PM

scroll saw alternatives
 
Is there any type of tool on the market that I could use to cut out
small wooden designs from some of the thicker balsam woods or thin
pine? Want to cut shapes such as stars, reindeer, etc. Either something
hand held or a small scroll saw? Tried experimenting with a neighbor's
scroll saw and it was too much for me to handle..
Tried using my dh's Dremel, but the cut was too wide and I went to
Lowe's and HD and was told no Dremel bit would make a clean cut so that
is out. Thanks Liz


ROYNEU January 25th 06 09:26 PM

scroll saw alternatives
 
Does it need to be powered?

How about a coping saw? Depth of cut about 6". Doesn't cut any faster
then you want it to either.

Roy


Juergen Hannappel January 25th 06 09:26 PM

scroll saw alternatives
 
writes:

Is there any type of tool on the market that I could use to cut out
small wooden designs from some of the thicker balsam woods or thin
pine? Want to cut shapes such as stars, reindeer, etc. Either something



A fret saw.

--
Dr. Juergen Hannappel
http://lisa2.physik.uni-bonn.de/~hannappe
Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23

Juergen Hannappel January 25th 06 09:31 PM

scroll saw alternatives
 
Juergen Hannappel writes:

writes:

Is there any type of tool on the market that I could use to cut out
small wooden designs from some of the thicker balsam woods or thin
pine? Want to cut shapes such as stars, reindeer, etc. Either something



A fret saw.


.... like
http://www.leevalley.com/wood/page.a...54&cat=1,42884
Are these not common household items, or at least tools used at school
almost everywhere?
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23

no(SPAM)vasys January 25th 06 09:35 PM

scroll saw alternatives
 
wrote:

Is there any type of tool on the market that I could use to cut out
small wooden designs from some of the thicker balsam woods or thin
pine? Want to cut shapes such as stars, reindeer, etc. Either something
hand held or a small scroll saw? Tried experimenting with a neighbor's
scroll saw and it was too much for me to handle..
Tried using my dh's Dremel, but the cut was too wide and I went to
Lowe's and HD and was told no Dremel bit would make a clean cut so that
is out. Thanks Liz


Are we talking about a hand held scroll saw or a bench mounted scroll saw?

--
Jack Novak
Buffalo, NY - USA

(Remove -SPAM- to send email)

Leuf January 26th 06 02:52 AM

scroll saw alternatives
 
On 25 Jan 2006 13:11:18 -0800, wrote:

Is there any type of tool on the market that I could use to cut out
small wooden designs from some of the thicker balsam woods or thin
pine? Want to cut shapes such as stars, reindeer, etc. Either something
hand held or a small scroll saw? Tried experimenting with a neighbor's
scroll saw and it was too much for me to handle..
Tried using my dh's Dremel, but the cut was too wide and I went to
Lowe's and HD and was told no Dremel bit would make a clean cut so that
is out. Thanks Liz


If you don't need to make internal cuts there are small band saws.
You may find it easier than a scroll saw because of the larger blade
and only downward motion of the blade. The larger blade doesn't
require as much technique, but can't make as tight of curves. Have a
look at the Rikon 10" at woodcraft.com.

There are small scroll saws, such as the Microlux at micromark.com.


-Leuf

Rob Mills January 26th 06 03:25 AM

scroll saw alternatives
 

wrote in message
ups.com...

Tried experimenting with a neighbor's scroll saw and it was too much for
me to handle..


If you get a decent scroll saw and give your self a little (won't take long)
time to get used to it I'll betcha you'll find it just as easy (maybe
easier) as driving a sewing machine. They are really a piece of cake to
operate, my 8 yr old grand son loves to cut out stuff on mine. I have it
drilled into his head that if there is a problem, just let go and hit the
switch. I make sure he has safety goggles on. RM~

PS, My parents gave me a Craftsman 36 in jig saw for Xmas when I was 9.



Josh January 26th 06 03:33 AM

scroll saw alternatives
 
I've never used one, but the Micromark mini jigsaw seems like it might
work well. Anyone here ever use one of these?

http://www.ares-server.com/Ares/Ares...oduct&ID=15226

Also, there are some other ones reviewed he

http://www.jkstacydesigns.com/minireview.html

Josh


Robatoy January 26th 06 04:15 AM

scroll saw alternatives
 
In article . com,
"Josh" wrote:

I've never used one, but the Micromark mini jigsaw seems like it might
work well. Anyone here ever use one of these?


Cool! Runs off a transformer! You can even get a car adaptor for
it....for that scroll project on the go, or whilst in gridlock.

Josh January 26th 06 07:51 PM

scroll saw alternatives
 
I think you can add attachments for beard, nose, and ear hair trimming
as well.


[email protected] January 27th 06 04:49 PM

scroll saw alternatives
 
sorry , I should have mentioned that I would like something electric



All times are GMT +1. The time now is 09:05 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter