DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   2 & 4 Drawer File Cabinet Plans (https://www.diybanter.com/woodworking/138502-2-4-drawer-file-cabinet-plans.html)

Jeff Heyen January 3rd 06 11:05 PM

2 & 4 Drawer File Cabinet Plans
 
Guys,

I've been looking for detailed plans for two and four drawer
file cabinets. I am not particular as to whether they're free
or charged, I'm simply not having much luck so far finding
plans.

TIA,

Jeff



Mike Marlow January 3rd 06 11:28 PM

2 & 4 Drawer File Cabinet Plans
 

"Jeff Heyen" wrote in message
...
Guys,

I've been looking for detailed plans for two and four drawer
file cabinets. I am not particular as to whether they're free
or charged, I'm simply not having much luck so far finding
plans.

TIA,

Jeff



DAGS on file cabinet plans and you'll find some. Remember - google is your
friend.

--

-Mike-




Tom Watson January 3rd 06 11:35 PM

2 & 4 Drawer File Cabinet Plans
 
On Tue, 03 Jan 2006 23:05:24 GMT, "Jeff Heyen"
wrote:

Guys,

I've been looking for detailed plans for two and four drawer
file cabinets. I am not particular as to whether they're free
or charged, I'm simply not having much luck so far finding
plans.

TIA,

Jeff



I don't have any plans but I'll give you my notes on sizes from having
built them in the past:

FILE DRAWER SIZES

16" minimum interior width for legal size.
10" high drawer box with 1/2" bottom and 1/2" reveal below
This allows 1/4" below drawer box and 1/4" above the tab for total
height of the opening of 11 3/4"

It is easy to adjust this for letter size.

Something to note is what sort of hardware you will use if you are
going to use hanging files.

There are several types. The simplest overlays a 1/2" drawer side but
I always used thicker stock, so I used the type that fit into a groove
run into the tops of the sides.

This comes in at least two flavors. I've used the plastic but prefer
the straight metal type for more than occasional use.

Make sure you leave enough room for tabs above the file folders
-DAMHIKT.

HTH



Tom Watson - WoodDorker

tjwatson1ATcomcastDOTnet (real email)

http://home.comcast.net/~tjwatson1/

[email protected] January 4th 06 12:28 AM

2 & 4 Drawer File Cabinet Plans
 
Fine WoodWorking did a cover story on these files with measured
drawings in the latter part of 2004.My copy is buried in preparation
for moving.

Go to taunton.com , then go to FWW and do a search. You can probably
buy just that story with the drawings online.

Gary Curtis
Los Angeles


Jeff Heyen January 4th 06 02:14 AM

2 & 4 Drawer File Cabinet Plans
 

wrote in message
oups.com...
Fine WoodWorking did a cover story on these files with measured
drawings in the latter part of 2004.My copy is buried in preparation
for moving.

Go to taunton.com , then go to FWW and do a search. You can probably
buy just that story with the drawings online.

Gary Curtis
Los Angeles


Mike, I've done some Google searching, and just didn't find what I "think"
I'm looking for.

Tom, thanks for the sizing info, appreciate it.

Gary, thanks for the Taunton tip. I ended up going to Amazon and getting
two
books that I guessing will be a big help before I start this project, which
is gutting
my office and ending up with new wiring and lighting, and two walls of
computer
desk, file cabinets, storage and shelving.



Mike Marlow January 4th 06 03:35 AM

2 & 4 Drawer File Cabinet Plans
 

"Jeff Heyen" wrote in message
...

wrote in message
oups.com...
Fine WoodWorking did a cover story on these files with measured
drawings in the latter part of 2004.My copy is buried in preparation
for moving.

Go to taunton.com , then go to FWW and do a search. You can probably
buy just that story with the drawings online.

Gary Curtis
Los Angeles


Mike, I've done some Google searching, and just didn't find what I

"think"
I'm looking for.


I guess it's all a matter of taste. I did the search and the first set of
plans it came up with was a cabinet that I thought was the nuts - was sure
you'd find it great too. Shows how much I know, huh?

--

-Mike-




Oleg Lego January 4th 06 03:58 AM

2 & 4 Drawer File Cabinet Plans
 
The Jeff Heyen entity posted thusly:

Mike, I've done some Google searching, and just didn't find what I "think"
I'm looking for.


Did you do a search using
"fiking cabinet" plans

I did (typo) and came up with a few. :-)


Leuf January 4th 06 05:14 AM

2 & 4 Drawer File Cabinet Plans
 
On Tue, 3 Jan 2006 22:35:09 -0500, "Mike Marlow"
wrote:

Mike, I've done some Google searching, and just didn't find what I

"think"
I'm looking for.


I guess it's all a matter of taste. I did the search and the first set of
plans it came up with was a cabinet that I thought was the nuts - was sure
you'd find it great too. Shows how much I know, huh?


I would have measured the file folders and made 2 or 4 boxes around
them and then another box around those. I don't know anything either
though.


-Leuf

J T January 4th 06 05:54 PM

2 & 4 Drawer File Cabinet Plans
 
Tue, Jan 3, 2006, 10:35pm (Mike*Marlow) who
apparently is a person of little taste, says:
I guess it's all a matter of taste. I did the search and the first set
of plans it came up with was a cabinet that I thought was the nuts - was
sure you'd find it great too. Shows how much I know, huh?

You apparently used a different version of google. Anyway, he said
he did "some" googling. Betcha he didn't check his local library
either. Or the archives.



JOAT
You'll never get anywhere if you believe what you "hear".
What do you "know"?
- Granny Weatherwax


Mike Marlow January 4th 06 08:14 PM

2 & 4 Drawer File Cabinet Plans
 

"J T" wrote in message
...
Tue, Jan 3, 2006, 10:35pm (Mike Marlow) who
apparently is a person of little taste, says:
I guess it's all a matter of taste. I did the search and the first set
of plans it came up with was a cabinet that I thought was the nuts - was
sure you'd find it great too. Shows how much I know, huh?


You apparently used a different version of google. Anyway, he said
he did "some" googling. Betcha he didn't check his local library
either. Or the archives.


Yeah... I use the browser version. Shoulda thought about that myself.

--

-Mike-




J T January 4th 06 09:56 PM

2 & 4 Drawer File Cabinet Plans
 
Wed, Jan 4, 2006, 3:14pm (Mike*Marlow)
admits:
Yeah... I use the browser version. Shoulda thought about that myself.

LMAO



JOAT
You'll never get anywhere if you believe what you "hear".
What do you "know"?
- Granny Weatherwax



All times are GMT +1. The time now is 09:33 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter