woodworking tool
 

I'm looking at Foredom hand grinders for small delicate wood carving. The
one with the drive cable and small handpiece. I have also seen others. I
want a high quality long lasting unit.

Any advice on brand names? Features to get/stay away from?

Steve

woodworking tool
 

Become a Foredom "dealer" and save 40%
Tom
"SteveB" wrote in message
news:zT0lf.11111$Wu.2567@fed1read05...
I'm looking at Foredom hand grinders for small delicate wood carving. The
one with the drive cable and small handpiece. I have also seen others. I
want a high quality long lasting unit.

Any advice on brand names? Features to get/stay away from?

Steve

woodworking tool
 

"SteveB" wrote in message
news:zT0lf.11111$Wu.2567@fed1read05...
I'm looking at Foredom hand grinders for small delicate wood carving. The
one with the drive cable and small handpiece. I have also seen others. I
want a high quality long lasting unit.

Any advice on brand names? Features to get/stay away from?

Go pneumatic if you can afford it, Those turbine-power jobs whisk the wood
away rather than hack and bounce.

woodworking tool
 

George wrote:

"SteveB" wrote in message
news:zT0lf.11111$Wu.2567@fed1read05...

I'm looking at Foredom hand grinders for small delicate wood carving. The
one with the drive cable and small handpiece. I have also seen others. I
want a high quality long lasting unit.

Any advice on brand names? Features to get/stay away from?


Go pneumatic if you can afford it, Those turbine-power jobs whisk the wood
away rather than hack and bounce.


Air powered grinders can suck even a 30 gallon tank dry in nothing flat.
Be sure to have plenty of cfm. My 30 gallon sears unit gets hotter
than hell when I run a die grinder. Every other air powered tool I've
got (except for the 2 drills) use a small fraction of the volume of air
needed for the grinder.

Dave

woodworking tool
 

In article ,
David wrote:

Go pneumatic if you can afford it, Those turbine-power jobs whisk the wood
away rather than hack and bounce.


Air powered grinders can suck even a 30 gallon tank dry in nothing flat.
Be sure to have plenty of cfm. My 30 gallon sears unit gets hotter
than hell when I run a die grinder. Every other air powered tool I've
got (except for the 2 drills) use a small fraction of the volume of air
needed for the grinder.

David, I could be mistaken, but I believe George is referring to the
high-speed (350k - 500k rpm) dental air grinders. They retail about $300
to $500 - gee, what's that, about $1/1000 rpm? These need about 1-2cfm
at 45psi.

To name a couple:
http://www.turbocarver.com/
http://www.woodturnerscatalog.com/cg...ction&key=139-
0100
--
Owen Lowe
The Fly-by-Night Copper Company
__________

"I pledge allegiance to the flag of the
Corporate States of America and to the
Republicans for which it stands, one nation,
under debt, easily divisible, with liberty
and justice for oil."
- Wiley Miller, Non Sequitur, 1/24/05