wierdness in Excalibur ad...stainless steel not reliably straight?
 

I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is
just not reliably straight enough for our standards..."

Why would stainless be any less straight than any other kind of steel?

Chris

wierdness in Excalibur ad...stainless steel not reliably straight?
 

I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is just
not reliably straight enough for our standards..."

Why would stainless be any less straight than any other kind of steel?

Chris

If it was worded more accurately, it would read "for our standards at a
price we are willing to pay."

Stainless can be as straight as needed for anything that a woodworking
machine would ever need it to be, but like ANY other steel, it's going to
need to be straightened and it's not as easy as it is to do to "normal"
steel...that is, cold rolled or alloy steel.

Mike

wierdness in Excalibur ad...stainless steel not reliably straight?
 

Perhaps it reacts to temperature shifts too easy.

Chris Friesen wrote:

I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is
just not reliably straight enough for our standards..."

Why would stainless be any less straight than any other kind of steel?

Chris

wierdness in Excalibur ad...stainless steel not reliably straight?
 

Chris Friesen wrote:
I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is
just not reliably straight enough for our standards..."

Why would stainless be any less straight than any other kind of steel?

Stainless has both a higher strength than mild steel, and it work
hardens much more rapidly as it is formed. Rectangular tubes in
stainless will end up with higher residual stresses after forming and
welding than tubes from mild steel. These stresses will tend to
distort the tube from a perfect shape. I expect the tube mills
guarantee better straightness on mild steel tubing.

All that said, however, this claim is primarily marketing hype.
Exactor sells sliding tables that are (or at least started as) copies
of Excalibur's. Exactor tried to differentiate theirs by using
stainless rails and claiming since there's no paint for the table
rollers to wear off, their sliding table stays more accurate over time.
Excalibur shot back that their painted steel rails are more accurate
to start with.

I see that Exactor now sells Biesemeyer-clone rip fences. The front
rail they use is painted mild steel tubing. So if paint wearing off
was a big deal for accuracy, you'd wonder why they didn't use a
stainless rail on their rip fence, too?

Anyway, I've got the Excalibur sliding table and Exactor overarm blade
guard, both bought at woodworking shows for good discounts from list.
I'm very happy with both. When I got the sliding table, I talked to
both vendors at the same show. I wanted the 40" model to cut 4x8'
panels and the Exactor vendor insisted on selling me his 26" model
(which I think he had too many of). The Excalibur guy sold me the 40"
table for the price of the 26" Exactor. I didn't see any significant
mechanical differences between the two. If the prices were reversed, I
would have bought the Exactor. But now I've got one, I can't see
myself ever giving it up.

During hobby use for three years I don't see any evidence the paint is
wearing off the rails, but if it does, I doubt I would even be able to
measure the difference with a micrometer. I doubt if I could measure
the lack of straightness of stainless rails, either.

Tim

wierdness in Excalibur ad...stainless steel not reliably straight?
 

On Tue, 25 Oct 2005 17:57:58 -0600, Chris Friesen wrote:

I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is
just not reliably straight enough for our standards..."

Huh?

Why would stainless be any less straight than any other kind of steel?

Because their marketing people didn't check with anyone before writing
that copy, I'd guess. Complete and utter bull****.

wierdness in Excalibur ad...stainless steel not reliably straight?
 

On Tue, 25 Oct 2005 17:57:58 -0600, Chris Friesen
wrote:


I saw the following in an ad for Excalibur:

"...we won't use stainless steel for guide rails for example. It is
just not reliably straight enough for our standards..."

Why would stainless be any less straight than any other kind of steel?

Chris


starrett makes high end straight edges from stainless. they are very
expensive.

cheap stainless tends to be soft.

wierdness in Excalibur ad...stainless steel not reliably straight?