hello,

I have a 5ft 10'' log that I would like to transform in useable wood...

question is do I need to let the log dry first and then cut it in boards, or
should I slice it when wet, or in between?

thanks, cyrille

"Cyrille de Brébisson" wrote in message
...
hello,

I have a 5ft 10'' log that I would like to transform in useable wood...

question is do I need to let the log dry first and then cut it in boards,
or should I slice it when wet, or in between?

Cut first, stack with stickers (spacers) and let it dry about one year per
inch.

"Cyrille de Brébisson" wrote in message
...
hello,

I have a 5ft 10'' log that I would like to transform in useable wood...

question is do I need to let the log dry first and then cut it in boards,
or should I slice it when wet, or in between?

thanks, cyrille


Sooner the better on the sawing. http://www.fpl.fs.fed.us/ and searches on
sawing/stacking/drying will give you a lot of good information to use in
making the best of your log.

On Thu 29 Sep 2005 09:57:37a, "Cyrille de Brébisson"
wrote in :


I have a 5ft 10'' log that I would like to transform in useable
wood...

question is do I need to let the log dry first and then cut it in
boards, or should I slice it when wet, or in between?


I had a chance to work at an oldtime sawmill over Labor Day. Some logs were
cut a few days ago, some had been sitting for years. I brought my moisture
meter along just for fun. The meter pegs out at 20 percent.

Every board I checked maxed out the meter. Old logs, new logs, inner wood,
outer wood, all of 'em. Nothing under 20 percent. I checked the meter on
what I knew was dry wood and it read about 6%, so I know it was working.

Near as I could tell, it doesn't matter how long the log lays around. It's
not going to dry, it's going to rot. If you bring it inside and keep it
warm it might dry, but I'd bet it would take more than a few years. It's
got to be cut up.

"Dan" wrote in message
.. .
I had a chance to work at an oldtime sawmill over Labor Day. Some logs
were
cut a few days ago, some had been sitting for years. I brought my moisture
meter along just for fun. The meter pegs out at 20 percent.

Every board I checked maxed out the meter. Old logs, new logs, inner wood,
outer wood, all of 'em. Nothing under 20 percent. I checked the meter on
what I knew was dry wood and it read about 6%, so I know it was working.

Near as I could tell, it doesn't matter how long the log lays around. It's
not going to dry, it's going to rot. If you bring it inside and keep it
warm it might dry, but I'd bet it would take more than a few years. It's
got to be cut up.

If they were boards, your average relative humidity must have been ~ 85%.
That applies indoors or out, by the way. Lower the RH, lower the EMC, lower
the actual MC.

With logs, of course, bark and sun are the major players.