|
Laser guides for drill presses
I noticed that some drill presses come equipped with laser guides. Is
this something that you can buy as an attachment to most drill presses? Jack |
"mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote in message ... I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? No. Seems to me the bit points right where it is going to hit. |
"mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote in message ... I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack I don't know. My DP has a solid metal pointing device. It has proven to be very accurate and is dead nuts right every time. Another benefit is the auto compensation for the varying length of the bits. |
mywebaccts (at) PLUGcomcast.net wrote:
I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack don't waste your money. bring the bit down to the work and you'll know where it's gonna drill... Dave |
Yes. Craftsman makes one. It's item number 24042 at Sears.com.
JP ************* Just the fax, ma'am. |
Most of those are inherently a waste of money unless you ALWAYS use
the exact same length of drill bit in all the bits you have/use. If the length differs, then you gotta re-adjust/re-calibrate the laser There ARE laser alinement devices for around $60 that chuck into the drill press and give you fairly accurate indication of where on the workpiece the drill will go, but those need to be chucked up every time you want to drill a hole, and then once aligned you unchuck the laster and chuck up the drill bit. Not real convenient nor will it speed up your drilling, BUT it WILL increase the accuracy of the drilling John On Tue, 16 Aug 2005 16:39:01 -0600, "mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote: I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack |
"mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote
in message I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Laser guides for drill presses?? jeeezus. I suppose laser guides included with a prescription for Viagra is next? Just think, no more fumbling around in the dark. -- www.e-woodshop.net Last update: 8/07/05 |
Good grief Swingman, what is wrong with you. Might might be newer then
your's but it is heat seeking. Maybe your's need updating! Roy |
"ROYNEU" wrote in message
Good grief Swingman, what is wrong with you. Might might be newer then your's but it is heat seeking. Maybe your's need updating! ROTFL ... Nope ...more likely the size of the pointing device. ;) -- www.e-woodshop.net Last update: 8/07/05 |
|
On Tue, 16 Aug 2005 16:39:01 -0600, "mywebaccts (at) PLUGcomcast.net"
"mywebaccts (at) PLUGcomcast.net" wrote: I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack I've only seen one laser pointer on a DP, and it was kind of clever.... I expected a red dot where the hole would be drilled.. like "gee, I wonder where the bit will hit the wood"... What it actually did was throw out 2 lines at 90 degrees, like one of those laser picture hangers, so you could line up with other holes, I guess.. Since I own 2 modern tools, a pencil and straight edge, I haven't run out and bought a laser for the DP.. mac Please remove splinters before emailing |
On Wed, 17 Aug 2005 06:03:36 -0500, "Swingman" wrote:
"mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote in message I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Laser guides for drill presses?? jeeezus. I suppose laser guides included with a prescription for Viagra is next? Just think, no more fumbling around in the dark. It might be more effective on your chin... *g* mac Please remove splinters before emailing |
Well, I know that it's a fairly redundant and unnecessary thing to have,
but I figured that if I were doing a lot of drilling, it might make things just a 'bit' easier to not have to lower the drill down each time to line it up. Given the amused responses, it sounds like it's not worth the money. Of course, I can always retrofit a guide on later if I decide it would help. Thanks! David wrote: mywebaccts (at) PLUGcomcast.net wrote: I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack don't waste your money. bring the bit down to the work and you'll know where it's gonna drill... Dave |
Most of those are inherently a waste of money unless you ALWAYS use
the exact same length of drill bit in all the bits you have/use. If the length differs, then you gotta re-adjust/re-calibrate the laser Do these laser things project from one point or two? If I were designing a laser marker I'd project two lines from two points behind the bit, one on each side, to intersect in a line - that would mark the correct spot regardless of table height or bit length. |
oops: project two planes from two points behind the bit, to intersect
in a line at the spindle axle or draw two lines to intersect at an X on the workpiece |
This is something that is far more cool than actually a necessity. If your
press actually came with it would be the only reason to have one. Other than that it's just a very highly polished whistle. "Swingman" wrote in message ... "mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote in message I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Laser guides for drill presses?? jeeezus. I suppose laser guides included with a prescription for Viagra is next? Just think, no more fumbling around in the dark. -- www.e-woodshop.net Last update: 8/07/05 |
"Swingman" wrote in message ... "mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote in message I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Laser guides for drill presses?? jeeezus. I suppose laser guides included with a prescription for Viagra is next? Just think, no more fumbling around in the dark. I think I am going to invent the laser guided pencil. |
In article ,
Swingman wrote: no more fumbling around in the dark. But that's how you find an OLD man in the dark, just feel around, it won't be hard. Gerry |
mywebaccts (at) PLUGcomcast.net wrote: Well, I know that it's a fairly redundant and unnecessary thing to have, but I figured that if I were doing a lot of drilling, it might make things just a 'bit' easier to not have to lower the drill down each time to line it up. Given the amused responses, it sounds like it's not worth the money. Of course, I can always retrofit a guide on later if I decide it would help. Thanks! With most drill presses I've seen, you not only lower the bit each time to line it up, but you then lower the bit further each time to drill the hole. Pretty hard to drill the hole without lowering the bit, unless maybe you're holding the wood in your hands and raising it up to the drill. But maybe I'm missing something. John Martin |
HA! Puny Wood dorkers! My LASER has a DRILL PRESS attached!! ZOW!
'Zippy the 'dorker' |
It might be very useful if you do nearly all your drilling with bits
that don't have a center spur to guide the location of the hole. I find that when I use a hole saw, it is very difficult to determine the exact location, even with a pilot bit, mainly b/c the bit is under the hole saw. |
"woodworker88" wrote in message
It might be very useful if you do nearly all your drilling with bits that don't have a center spur to guide the location of the hole. I find that when I use a hole saw, it is very difficult to determine the exact location, even with a pilot bit, mainly b/c the bit is under the hole saw. When I'm drilling with a holesaw, I lower the bit until it barely indents the wood. Then I raise it up to see how it's lined up. Depending on that information you readjust or don't. I can't for the life of me see where the few seconds required to do this type of alignment justifies the frivolous cost of a laser pointer. I guess if you've got the money, then hey, it's your money. But me, I'd just as soon invest it in something more important, like beer. :) |
"Upscale" wrote in message ... "woodworker88" wrote in message It might be very useful if you do nearly all your drilling with bits that don't have a center spur to guide the location of the hole. I find that when I use a hole saw, it is very difficult to determine the exact location, even with a pilot bit, mainly b/c the bit is under the hole saw. When I'm drilling with a holesaw, I lower the bit until it barely indents the wood. Then I raise it up to see how it's lined up. Depending on that information you readjust or don't. I can't for the life of me see where the few seconds required to do this type of alignment justifies the frivolous cost of a laser pointer. I guess if you've got the money, then hey, it's your money. But me, I'd just as soon invest it in something more important, like beer. :) My drill press table can move side to side -- it doesn't move on a geared track. The laser would be handy to line up the table when I'm moving it (unless I'm missing an easier way). |
On Thu, 18 Aug 2005 16:12:09 -0400, "Jerry S." wrote:
"Upscale" wrote in message ... "woodworker88" wrote in message It might be very useful if you do nearly all your drilling with bits that don't have a center spur to guide the location of the hole. I find that when I use a hole saw, it is very difficult to determine the exact location, even with a pilot bit, mainly b/c the bit is under the hole saw. When I'm drilling with a holesaw, I lower the bit until it barely indents the wood. Then I raise it up to see how it's lined up. Depending on that information you readjust or don't. I can't for the life of me see where the few seconds required to do this type of alignment justifies the frivolous cost of a laser pointer. I guess if you've got the money, then hey, it's your money. But me, I'd just as soon invest it in something more important, like beer. :) My drill press table can move side to side -- it doesn't move on a geared track. The laser would be handy to line up the table when I'm moving it (unless I'm missing an easier way). sure... use a sharpie to mark an X or "bulls eye on the table and line up the bit to the mark.. My table (shopsmith) moves front-to-back and has an insert in the middle for drilling/routing.. pretty easy to line THAT up.. lol mac Please remove splinters before emailing |
When I'm drilling with a holesaw, I lower the bit until it barely indents the wood. Then I raise it up to see how it's lined up. Depending on that information you readjust or don't. I can't for the life of me see where the few seconds required to do this type of alignment justifies the frivolous cost of a laser pointer. Good point, but will it still work with a large diameter hole saw mounted? |
Greetings and Salutations...
On Tue, 16 Aug 2005 16:39:01 -0600, "mywebaccts (at) PLUGcomcast.net" "mywebaccts (at) PLUGcomcast.net" wrote: I noticed that some drill presses come equipped with laser guides. Is this something that you can buy as an attachment to most drill presses? Jack Seems like a cute gadget to me...but not all that useful unless one is doing production, and in THAT case, there should be jigs to do the work. Actually, I don't want one until I can line up the spot, then, punch a button and have a neat hole vaporized in the material. Regards Dave Mundt |
"Dave Mundt" wrote in message
Actually, I don't want one until I can line up the spot, then, punch a button and have a neat hole vaporized in the material. You can already buy one of those. It's called a 22-250 rifle. |
| All times are GMT +1. The time now is 08:00 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter