Whiteside set
 

http://www.woodpeck.com/whiteside3pcset.html

I almost bought this set at Woodcraft yesterday. What stopped me was two
things, and it may be me being too picky or not understanding something?

1) It doesn't have a backcutter. Reason I look for backcutter included is
so that I know it's the correct size (thickness) for the rail/stile
slots.

2) The rail roundover shape is short, unlike of CMT and others "longer"
roundover.

Howcome most router bits today have 2 cutters while almost none have
three cutters (like this link above)? Freud's 2+2 is also two cutters.

I thought Whiteside would be more expensive than CMT, but isn't. The
salesperson told me it's only "3 dollars differences" between the
Whiteside and CMT, but I didn't see that. The CMT doesn't have the set I
want (Cove and Roundover together), so it would be $260 if I buy two
boxes of CMT (instead of a 3-piece set).

I am just starting to look around now due to Amazon.com not shipping my
order, and I don't want to talk about this Amazon.com. Please reply
regarding the Whiteside or anything else you wish.

Chuck

CNT wrote in :

1) It doesn't have a backcutter. Reason I look for backcutter included
is so that I know it's the correct size (thickness) for the rail/stile
slots.

Doesn't a backcutter just rabbit the bottom of the panel? I.e., wouldn't
it need two cutters to trim the panel to size?
Or do you mean the panel cutter bit should include a backcutter part at
the bottom of it?

You might also want to look at Infinity Tool bits. Reviews on them
have been good, but I'm not sure how they compare to Whiteside or
Freud bits:
http://www.infinitytools.com


ken

Ken Yee wrote:

CNT wrote in :

1) It doesn't have a backcutter. Reason I look for backcutter included
is so that I know it's the correct size (thickness) for the rail/stile
slots.

Doesn't a backcutter just rabbit the bottom of the panel? I.e., wouldn't
it need two cutters to trim the panel to size?

Yes....

Or do you mean the panel cutter bit should include a backcutter part at
the bottom of it?

He's simply talking of the matched sets w/ spacer bearing that does both
the front and rear of the panel at the same time...no real big deal,
imo, but does eliminate one operation.