Retaining Wall Wood form stripped.
 

With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

john

Retaining Wall Wood form stripped.
 

jloomis wrote:

With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

john

As they well should be. Good job


--

There is never a situation where having more rounds is a disadvantage

Rob Leatham

Retaining Wall Wood form stripped.
 

On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?

Chris

Retaining Wall Wood form stripped.
 

"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?


Didn't you notice the handcut dovetails along the bottom?

;~)

Retaining Wall Wood form stripped.
 

"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?


Didn't you notice the handcut dovetails along the bottom?

;~)

Retaining Wall Wood form stripped.
 

The shape is curved........that is one way.......It has quite a deep
footing....
and very wide.....18" wide x 12" and more deep. I also tied it to the
concrete stairs with epoxy rebar in 3 placed and also at the garage slab.
A french drain with weep holes will provide drainage too.
john
"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?

Chris

Retaining Wall Wood form stripped.
 

The shape is curved........that is one way.......It has quite a deep
footing....
and very wide.....18" wide x 12" and more deep. I also tied it to the
concrete stairs with epoxy rebar in 3 placed and also at the garage slab.
A french drain with weep holes will provide drainage too.
john
"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?

Chris

Retaining Wall Wood form stripped.
 

Got curious; found some references:

http://en.wikipedia.org/wiki/Retaining_wall

http://en.wikipedia.org/wiki/Tieback_(geotechnical)

http://www.dot.ca.gov/hq/esc/constru...Foundation.pdf

David Merrill


"jloomis" wrote in message
...
The shape is curved........that is one way.......It has quite a deep
footing....
and very wide.....18" wide x 12" and more deep. I also tied it to the
concrete stairs with epoxy rebar in 3 placed and also at the garage slab.
A french drain with weep holes will provide drainage too.
john
"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping towards
the house over the years?

Chris

Retaining Wall Wood form stripped.
 

The height of the wall and what it is retaining and the soil it is in are
all factors in building the proper wall.
The Building Dept. here require an engineer on a wall over 48"
(that is if it is used as a foundation)
Footing/wall width and steel placement are also a factor in building these
walls.
Some Building Supplies sell stacking block and plastic pins and eposy for
"stackable wall systems" they are very useful, easy to construct.
I think the drainage is an important factor also. Allowing the water that
may build up on the other side of the wall have an escape route.

This wall was only 31" tall, and I did give it adequate footing and steel
along with drainage so that it will work out over the long haul.
john
"David Merrill" wrote in message
news:NMpsm.47165$5n1.23356@attbi_s21...
Got curious; found some references:

http://en.wikipedia.org/wiki/Retaining_wall

http://en.wikipedia.org/wiki/Tieback_(geotechnical)

http://www.dot.ca.gov/hq/esc/constru...Foundation.pdf

David Merrill


"jloomis" wrote in message
...
The shape is curved........that is one way.......It has quite a deep
footing....
and very wide.....18" wide x 12" and more deep. I also tied it to the
concrete stairs with epoxy rebar in 3 placed and also at the garage slab.
A french drain with weep holes will provide drainage too.
john
"Chris Friesen" wrote in message
...
On 09/15/2009 03:46 PM, jloomis wrote:
With a sample of the retaining wall and wall look.
Job is complete.
Owners happy.

Is there anything anchoring that wall to prevent it from tipping
towards
the house over the years?

Chris