DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking Plans and Photos (https://www.diybanter.com/woodworking-plans-photos/)
-   -   mahogany end table (https://www.diybanter.com/woodworking-plans-photos/268087-mahogany-end-table.html)

steven griffey January 3rd 09 08:32 PM

mahogany end table
 
1 Attachment(s)
here are some shot of the mahogany end table that i just completed. i am
going to wait until next weekend to finish rubbing out the top coat so that
it has time to harden good. the top is mahogany edged with east Indian
rosewood veneered to a mdf sub, the inlay is Africa satin wood. i oiled the
top and case with a homemade oil and then spray with shellac to seal it. the
top was finished with gloss spray varnish.





Mark & Juanita January 3rd 09 09:43 PM

mahogany end table
 
steven griffey wrote:

here are some shot of the mahogany end table that i just completed. i am
going to wait until next weekend to finish rubbing out the top coat so
that it has time to harden good. the top is mahogany edged with east
Indian rosewood veneered to a mdf sub, the inlay is Africa satin wood. i
oiled the top and case with a homemade oil and then spray with shellac to
seal it. the top was finished with gloss spray varnish.


Very nice. What are you using for drawer runners? Are they sliding along
the bottom stretcher rail?


--
If you're going to be dumb, you better be tough

jloomis January 4th 09 01:55 AM

mahogany end table
 
Very nice pieces of work. Lots of patience in those. I do like the inlay
details.
jloomis
"steven griffey" wrote in message
m...
here are some shot of the mahogany end table that i just completed. i am
going to wait until next weekend to finish rubbing out the top coat so
that it has time to harden good. the top is mahogany edged with east
Indian rosewood veneered to a mdf sub, the inlay is Africa satin wood. i
oiled the top and case with a homemade oil and then spray with shellac to
seal it. the top was finished with gloss spray varnish.






All times are GMT +1. The time now is 07:05 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter