DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodturning (https://www.diybanter.com/woodturning/)
-   -   Copyright Issues Palgiarism and All that stuff.. (https://www.diybanter.com/woodturning/99454-copyright-issues-palgiarism-all-stuff.html)

WillR April 1st 05 02:59 PM

Copyright Issues Palgiarism and All that stuff..
 
Copyright Issues Plagiarism and All that stuff..

A link to the Canadian Copyright Act.
http://laws.justice.gc.ca/en/C-42/

Since the act is based on International treaty there should not be many
areas of disagreement with other countries. Except Taiwan and their ilk.

Note: Moral rights.... Read that section it should be of interest based
on most questions I have seen here.

Most questions in this forum are answered here.

--
Will
Occasional Techno-geek

WillR April 1st 05 03:32 PM

WillR wrote:
Copyright Issues Plagiarism and All that stuff..

A link to the Canadian Copyright Act.
http://laws.justice.gc.ca/en/C-42/

Since the act is based on International treaty there should not be many
areas of disagreement with other countries. Except Taiwan and their ilk.

Note: Moral rights.... Read that section it should be of interest based
on most questions I have seen here.

Most questions in this forum are answered here.


The Berne Convention is much more clear on "the limits" for plagiarism
a, copying and term of rights than the acts of some countries...

Again -- note moral rights here.
http://www.law.cornell.edu/treaties/berne/overview.html

http://www.wipo.int/treaties/en/ip/berne/

USA Enactment of...
http://www.cni.org/docs/infopols/US....onvention.html

More stuff on ethics and protection of authors
http://home.cwru.edu/~ijd3/authorship/berne.html

Economic Right vs. Moral rights...
Article on fundamental difference between American law ans European Law
(and perhaps most of the rest of the world)
http://home.cwru.edu/~ijd3/authorship/economic.html

And of course -- the google search for those wishing to delve further...
http://www.google.ca/search?q=Berne+...tart=1 0&sa=N



--
Will
Occasional Techno-geek


All times are GMT +1. The time now is 07:25 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter