Morse Taper Adapter Issue
 

What is the correct method for removing morse taper tail centers
(Nova), jacob drill chucks from morse taper adapters. Is it buy an
adapter for each item?

I have Oneway tailstock with a #3 taper and I use a #2to#3 adapter to
allow for for use of my #2 Nova live center. However,I find it very
difficult to remove the Nova live center from the adapter. It has a
slot in the adapter that I use a punch to extract the live center.
This appears not to be the right method. as I wind up mucking up the
end of the Nova live center.

Any suggestions?

Morse Taper Adapter Issue
 

Lorin wrote:
What is the correct method for removing morse taper tail centers
(Nova), jacob drill chucks from morse taper adapters. Is it buy an
adapter for each item?

I have Oneway tailstock with a #3 taper and I use a #2to#3 adapter to
allow for for use of my #2 Nova live center. However,I find it very
difficult to remove the Nova live center from the adapter. It has a
slot in the adapter that I use a punch to extract the live center.
This appears not to be the right method. as I wind up mucking up the
end of the Nova live center.

Any suggestions?

Lorin, the correct tool is called a drift--just a piece of 1/8" or 3/16"
steel plate, about 4" long and tapered from about 1/2" to 1 1/2".
Measurements from memory, too lazy to run out to the shop right now :-)

Ken Grunke
http://www.token.crwoodturner.com
member, Coulee Region Woodturners of SW Wisconsin
http://www.crwoodturner.com


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Morse Taper Adapter Issue
 

On 5 Jun 2004 08:24:01 -0700, (Lorin) wrote:

What is the correct method for removing morse taper tail centers
(Nova), jacob drill chucks from morse taper adapters. Is it buy an
adapter for each item?

generally, yes.




I have Oneway tailstock with a #3 taper and I use a #2to#3 adapter to
allow for for use of my #2 Nova live center. However,I find it very
difficult to remove the Nova live center from the adapter. It has a
slot in the adapter that I use a punch to extract the live center.
This appears not to be the right method. as I wind up mucking up the
end of the Nova live center.

Any suggestions?


adapters are cheap.

Morse Taper Adapter Issue
 

To remove my morse taper tail centers I just unwind the wheel which brings
in the ram and the morse taper pops out. To use my Jacobs chuck I have to
run the ram out to fit the morse taper in, maybe it is a little long.

Bruce
"Lorin" wrote in message
m...
What is the correct method for removing morse taper tail centers
(Nova), jacob drill chucks from morse taper adapters. Is it buy an
adapter for each item?

I have Oneway tailstock with a #3 taper and I use a #2to#3 adapter to
allow for for use of my #2 Nova live center. However,I find it very
difficult to remove the Nova live center from the adapter. It has a
slot in the adapter that I use a punch to extract the live center.
This appears not to be the right method. as I wind up mucking up the
end of the Nova live center.

Any suggestions?