pen stuff
Any suggestions on the best place to get ink pen fix'ins? Don't need
the wood blanks just the mechanical stuff. Thanx a mil. Ross www.highislandexport.com |
pen stuff
In message , Ross
Hebeisen writes Any suggestions on the best place to get ink pen fix'ins? Don't need the wood blanks just the mechanical stuff. Thanx a mil. Ross China :) But you need to buy in quantity. So your first decision is how many 1,10,100,1000 etc. -- John |
pen stuff
Ross Hebeisen wrote:
Any suggestions on the best place to get ink pen fix'ins? Don't need the wood blanks just the mechanical stuff. Thanx a mil. Ross www.highislandexport.com http://www.bereahardwoods.com/ -- Jack Novak Buffalo, NY - USA |
pen stuff
Like Jack, I have had good luck with Berea. Good service, good kits.
Also, I have used crafts supplies for years: http://www.woodturnerscatalog.com/st...n_Making?Args= While you shouldn't need to buy a new mandrel, make sure you buy new bushings with the kits. Many kits offered from manufacturers look the same, but aren't close enough to use parts universally. If you are interested in close tolerances, use the bushings from each vendor and keep them separate from one another in a zip lock back or similar. Robert |
pen stuff
On Mon, 12 Apr 2010 12:30:26 -0700, Ross Hebeisen wrote:
Any suggestions on the best place to get ink pen fix'ins? Don't need the wood blanks just the mechanical stuff. Thanx a mil. Ross http://www.woodturningz.com They carry PSI's full line, a bit cheaper, with Flat Rate shipping of anything that will fit in the small box, ($4.95 shipping minimum instead of $7.50 - makes a difference when you place a lot of $20-30 orders) and they tend to ship faster than PSI too. I've placed orders with WT and PSI within minutes of each other, and had the WT order in hand before PSI shipped theirs. You will need to call them for anything not listed on their website. They can look it up by PSI part number or by name, and they don't waste your time with a sales pitch; just take your order, get your payment info, and get to packing it up. |
All times are GMT +1. The time now is 05:23 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter