Let's Try Again - Join The Movement Movement? For Free?
 

Thought I'd posted this already but apparently not.
============
I've been frustrated by the fact that turning is very dynamic and yet
the resulting piece is static. So I've been playing with the idea of a
Movement Movement. When I found this slick little tethered power pack
thing - for four bucks and played with it - I went back and bought out
their stock - at $3 each. Knex.com, the folks who make these things list
it at $17.57

Here's what I'm talking about

http://web.hypersurf.com/~charlie2/T...mperative.html

SO - I'm looking for a volunteeror two to incorporate this into a
turning - and post pics of the piece or e-mail it to me and I'll put
it up on the web pages about this thing. And If you can do a short
video - say up to about 1Mb or so - send it along and I'll get it to
you tube - with your permission of course.

If you're interested e-mail me with a mailiing address and what you
might do with it - and I'll send you one - free - if it looks like
you'll
actually use it - in a piece.

Offer limited to the continental USA
(postage to NH was $3.75 - for a $3 item)

charlie b

Let's Try Again - Join The Movement Movement? For Free?
 

"charlieb" wrote in message
...
Thought I'd posted this already but apparently not.
============
I've been frustrated by the fact that turning is very dynamic and yet
the resulting piece is static. So I've been playing with the idea of a
Movement Movement. When I found this slick little tethered power pack
thing - for four bucks and played with it - I went back and bought out
their stock - at $3 each. Knex.com, the folks who make these things list
it at $17.57

Here's what I'm talking about

http://web.hypersurf.com/~charlie2/T...mperative.html

SO - I'm looking for a volunteeror two to incorporate this into a
turning - and post pics of the piece or e-mail it to me and I'll put
it up on the web pages about this thing. And If you can do a short
video - say up to about 1Mb or so - send it along and I'll get it to
you tube - with your permission of course.

If you're interested e-mail me with a mailiing address and what you
might do with it - and I'll send you one - free - if it looks like
you'll
actually use it - in a piece.

Offer limited to the continental USA
(postage to NH was $3.75 - for a $3 item)

charlie b

You have me intrigued, I am thinking of a toy soldier (1800's style), or
maybe a doll of some sort but the size of the moter and power supply might
be a problem. How about a bank with a pressure switch or contact switch
that would would activate the motor and cause it to spin when money was put
in? I am working on a fruit bowel inspired by one of your posts and will
have it finished as soon as I get time to play and not make orders (orders
come first and may they keep coming) I am looking forward to seeing what
comes out of this one.

Let's Try Again - Join The Movement Movement? For Free?
 

Hi Charlie! Ever since you first posted this, I've wanted to reply, but
life keeps getting in the way!

Your statement. "yet the resulting piece is static.". really got me to
thinking about all the pieces I have here in the house. While the piece
itself IS static, I see in many of my pieces what I'll have to call "static
movement". As I stand still viewing the piece, it is very static, however,
as I begin to move around the piece, there is movement. In particular, a
few pieces I've created with angled horizontal dividing lines between the
dominant wood being used. For instance, I have a small footed bowl (about 5
1/2" diam x 4" tall) made from Mahogany with a white pine line running thru
the bowl portion at an angle. I did this on the lathe as a sort of "what if
I..." challenge to myself.

I mounted a 6"diam piece of 3/4 Mahogany to the lathe using a 2 1/8"
forstner bit to drill the mounting hole for my chuck. Rather than set the
piece flat against the back of the chuck, I allowed it to remain slightly
"cocked" and then turned the face flat. To this, while still in the chuck,
I glued a 3/4" piece of white pine and turned it down to approx 1/4" on the
face side. Next came another piece of 3/4" Mahogany and it's face was
turned flat as well. I then loosened the chuck and reset the piece flat
against the back of the chuck, turned the face flat and the outside edge
round.

At this point I was considering making the piece a footed hollow form, but
after some further thought about that diagonal, almost pure white line, it
occurred to me that, as a hollow form, the viewer would only see the line
from the edge they were facing. The solution was a bowl. Viewing from a
slightly elevated position, the contrasting line is visible from the outside
as well as the inside and, being "cocked", as the viewer moves around the
piece, or rotates it in their hand, the line actually appears to move.

The base was a segmented effort using the mahogany and pine cutoffs from the
original squares and the piece was finished using a weak aniline dye mixture
of red and black with a lacquer final finish. I'll get some pics up if
anyone is interested.

I love your movement "movement" effort Charlie, just thought I'd offer a
different viewpoint.

Bob Crawford


"charlieb" wrote in message
...
Thought I'd posted this already but apparently not.
============
I've been frustrated by the fact that turning is very dynamic and yet
the resulting piece is static.

Let's Try Again - Join The Movement Movement? For Free?
 

Bob:

As usual, there's always more than one way to skin a cat. Your line,
inside and out encourages that the viewer add the movement to get the
line movement effect.
How about putting the piece on a slowly rotating turntable - battery
powered so
no power cord or outlet required?

Let's Try Again - Join The Movement Movement? For Free?
 

Yes! I have considered that, and more. For instance...

for a piece, say 6" in diameter, building an 8"x8" square (or round)
pedestal, perhaps 4-6 inches in height (black lacquer would be my choice of
finish here). Flush into the top of this would be a 6-7 inch turntable with
the top made of opaque white plastic. Below this would be a small (7 watt
or so?) light. One of the new CF bulbs would be great, good output w/little
heat. I've had this idea in my head for a few months now. It will get done
this year, I hope!

Bob


"charlieb" wrote in message
...
Bob:

As usual, there's always more than one way to skin a cat. Your line,
inside and out encourages that the viewer add the movement to get the
line movement effect.
How about putting the piece on a slowly rotating turntable - battery
powered so
no power cord or outlet required?