DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodturning (https://www.diybanter.com/woodturning/)
-   -   1st time making a cup (https://www.diybanter.com/woodturning/192725-1st-time-making-cup.html)

[email protected] February 19th 07 10:29 AM

1st time making a cup
 
Hi was curious if anyone has ever made a cedar cup, Dont know what i
was thinking but took a piece of cut off and made a neat little cup it
is my third piece of wood that i have turned after a little reading i
saw that i could use mineral oil and it would finish ok.. My big
question though is did i make the right decision in using mineral oil
or did i just mess up one of my first projects? any feedback would be
great.


[email protected] February 19th 07 02:25 PM

1st time making a cup
 
On Feb 19, 5:29 am, wrote: FOUR TIMES!
Hi was curious if anyone has ever made a cedar cup, Dont know what i
was thinking but took a piece of cut off and made a neat little cup it
is my third piece of wood that i have turned after a little reading i
saw that i could use mineral oil and it would finish ok.. My big
question though is did i make the right decision in using mineral oil
or did i just mess up one of my first projects? any feedback would be
great.


Gil,

You didn't mess up your cedar cup using the mineral oil. Were you
thinking of using the cup or is it just for show? I turn a lot of
cedar. Any finish will turn it brighter red and the color will stay
but the smell will not. I like no finish, the color will dull and
turn brownish but the smell will stay. You will have to sand the
cup, with 400 grit, after awhile to revitalize the aroma but it will
keep the aroma for years.

If I'm making something to be used, cup or bowl or platter, I use
either just a pure oil or no oil and just buff with the wax wheel with
minimum wax. People don't want to either worry about a "finish" nor
have to learn how to replace a finish, they just want to use the
item. There's no finish on rolling pins, cutting boards or wooden
spoons, they just grow more beautiful and silkier with use.

Ruth
www.torne-lignum.com


Leo Lichtman February 19th 07 06:14 PM

1st time making a cup
 
Hi, Ruth!

Mr. Gilmyn, you didn't mess up the cup, but you need to get rid of the
"bounce" in your send key. ;-)



Mark Fitzsimmons February 20th 07 06:52 PM

1st time making a cup
 
If you're going to drink from it, it might mess with the flavor of
what you drink. I made some goblets and after a lot of research (and
testing of the best finishes suggested) found that Varathane® Diamond
Water-Based Polyurethane did not soften or get milky with water or
alcohol. The smell of the cedar will definitely mess with wine.


Mark Fitzsimmons February 20th 07 07:01 PM

1st time making a cup
 
PS, I only put the varathane on the inside where the drinks would be,
so the outside could breathe and because I liked the matte finish of
the wood with oil, so the smell of the wood (olive:
http://www.woodturners.org/gallery/b...party/0276.jpg ) still
messes with the drink nose.



All times are GMT +1. The time now is 03:36 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter