Bandsaw off/on Switch?
Harry Curley wrote:
I have a Reliant Bandsaw 14 inch 4 speed and the off/on switch went. It is a four posted switch and the bandsaw is 110 Volts 9.3/4 amps. There was a company called Trend-Line Shop Supplies listed with the instruction book but I guess they are no longer in business in Chelsea Mass. The saw was purchase and given to me from Wood Workers Warehouse we all know what happened to those stores. I have tried several electrical supplies stores in my area without any luck. Any suggestions or ideas would be gratefully accepted Harry You might want to look at Grizzly Tools' switches. If I recall correctly the Reliant and Grizzly bandsaws seemed identical. Here's a link to a Grizzly web page with switches: http://www.grizzly.com/products/sear...x=0&submit.y=0 -- Jack Novak Buffalo, NY - USA (Remove -SPAM- to send email) |
Bandsaw off/on Switch?
"Harry Curley" wrote in message ... I have a Reliant Bandsaw 14 inch 4 speed and the off/on switch went. Any suggestions or ideas would be gratefully accepted Harry I mounted a standard box with a motor-rated switch on my Delta. No more trouble than a visit to the home center. |
Bandsaw off/on Switch?
Hi Harry
I have one of those 4 speed taiwan made BS and my switch will refuse to work sometimes, the problem with mine is sawdust in the switch, I blow it out and away she goes again, I have that BS for 8 years now and still have the original switch, maybe all you have to do is cleaning the switch. If not than I would replace the switch with a regular light switch. It helps to screw, tape, or glue a flexible rubber flap over the switch (inner tube) to keep the dust out. http://homepage.mac.com/l.vanderloo/PhotoAlbum22.html Have fun and take care Leo Van Der Loo |
Bandsaw off/on Switch?
I have a Reliant Bandsaw 14 inch 4 speed and the off/on switch went. It is a
four posted switch and the bandsaw is 110 Volts 9.3/4 amps. There was a company called Trend-Line Shop Supplies listed with the instruction book but I guess they are no longer in business in Chelsea Mass. The saw was purchase and given to me from Wood Workers Warehouse we all know what happened to those stores. I have tried several electrical supplies stores in my area without any luck. Any suggestions or ideas would be gratefully accepted Harry |
Bandsaw off/on Switch?
On 8 Feb 2006 14:34:01 -0800, "
wrote: Hi Harry I have one of those 4 speed taiwan made BS and my switch will refuse to work sometimes, the problem with mine is sawdust in the switch, I blow it out and away she goes again, I have that BS for 8 years now and still have the original switch, maybe all you have to do is cleaning the switch. If not than I would replace the switch with a regular light switch. It helps to screw, tape, or glue a flexible rubber flap over the switch (inner tube) to keep the dust out. http://homepage.mac.com/l.vanderloo/PhotoAlbum22.html Have fun and take care Leo Van Der Loo Just an addition to that, Leo... I didn't have trouble with my switch, but I know that it's usually what wears out first.. I wired up a standard 2 outlet box with a duplex plug and a light switch to control the plugs.. plugged the BS and the extra shopvac in so that they go on together.. (vac is hooked up to a DC port I cut on the BS door) Mac https://home.comcast.net/~mac.davis/wood_stuff.htm |
Bandsaw off/on Switch?
Thank everyone Grizzly appears to have switches that will fit my
bandsaw-Harry This is still the best group for help and information "no(SPAM)vasys" wrote in message ... Harry Curley wrote: I have a Reliant Bandsaw 14 inch 4 speed and the off/on switch went. It is a four posted switch and the bandsaw is 110 Volts 9.3/4 amps. There was a company called Trend-Line Shop Supplies listed with the instruction book but I guess they are no longer in business in Chelsea Mass. The saw was purchase and given to me from Wood Workers Warehouse we all know what happened to those stores. I have tried several electrical supplies stores in my area without any luck. Any suggestions or ideas would be gratefully accepted Harry You might want to look at Grizzly Tools' switches. If I recall correctly the Reliant and Grizzly bandsaws seemed identical. Here's a link to a Grizzly web page with switches: http://www.grizzly.com/products/sear...x=0&submit.y=0 -- Jack Novak Buffalo, NY - USA (Remove -SPAM- to send email) |
Bandsaw off/on Switch?
Harry, when you remove the switch from the box what do the terminals
look like? If they are flat blade type, Grizzly has them for $2.95 I believe, they also fit the Delta drill press.If this is what you need, make sure you get 115 volt type. As others posted, you could simply use a single pole wall switch,you would have to mount it differently.The Grizzly switch fits lots of machines,it's a paddle switch. mike |
All times are GMT +1. The time now is 10:21 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter