New to turning
 

I have been doing other woodworking for the best 5 yrs. and had seen so many
beautiful turnings posted on A.B.P.W that I thought I would like to learn to
do it. I decided to take a class at the local Woodcraft in both spindle and
bowl turning. It really helped (I still need a lot more practice) to learn
from and experienced turning. It also helped reading many of the posting
here. I took the advice and go the set of tools for spindle turning from
Harbor Freight and bowl turning from Penn State. They are good tools and
have been great to practice my sharpening skills. I need to turn a few more
small bowls that SWMBO likes and then maybe I can justify a better lathe,
chucks, and more time away from the kids.

Please checkout the pictures (alt.binaries.pictures.woodworking) and give me
some feedback.

Thanks,
John

New to turning
 

In article ,
"John \(NC\)" wrote:

Please checkout the pictures (alt.binaries.pictures.woodworking) and give me
some feedback.

If I recall, you posted the pics of the cedar bowl along with 2
anothers? That shallow cedar was quite striking (I believe it as the
second picture) - you did a great job placing the heartwood between the
sapwood edges. For beginning efforts, you're off to a great start. I'd
comment to make the exterior more bowl shaped and less inverted cone -
i.e. round the underside of the exterior more to make it less straight.
Otherwise, I wish my first efforts were as attractive.

--
Owen Lowe

Northwest Woodturners
Pacific Northwest Woodturning Guild
___
Tips fer Turnin': Place a sign, easily seen as you switch on your lathe, warning you to remove any and all rings from your fingers. Called degloving, extended hardware can grab your ring and rip it off your finger. A pic for the strong of stomach: www.itim.nsw.gov.au/go/objectid/2A3AC703-1321-1C29-70B067DC88E16BFC/index.cfm

Besides, rings can easily mar the surface of a turning as you check for finished smoothness.

New to turning
 

Thanks for the feedback. I really liked the grain pattern in the shallow
bowl myself. I will definitely work on my forming of the exterior bowl
shapes. I plan on hooking up with the local turning group to increase my
knowledge from more experienced craftsmen.

Again thanks for the feedback.

John


"Owen Lowe" wrote in message
...
In article ,
"John \(NC\)" wrote:

Please checkout the pictures (alt.binaries.pictures.woodworking) and give
me
some feedback.

If I recall, you posted the pics of the cedar bowl along with 2
anothers? That shallow cedar was quite striking (I believe it as the
second picture) - you did a great job placing the heartwood between the
sapwood edges. For beginning efforts, you're off to a great start. I'd
comment to make the exterior more bowl shaped and less inverted cone -
i.e. round the underside of the exterior more to make it less straight.
Otherwise, I wish my first efforts were as attractive.

--
Owen Lowe

Northwest Woodturners
Pacific Northwest Woodturning Guild
___
Tips fer Turnin': Place a sign, easily seen as you switch on your lathe,
warning you to remove any and all rings from your fingers. Called
degloving, extended hardware can grab your ring and rip it off your
finger. A pic for the strong of stomach:
www.itim.nsw.gov.au/go/objectid/2A3AC703-1321-1C29-70B067DC88E16BFC/index.cfm

Besides, rings can easily mar the surface of a turning as you check for
finished smoothness.