|
Selling my Delta Lathe. Pick-up only. Central Coastal CA
On Tue, 27 Dec 2005 22:01:05 GMT, Bill Badland wrote:
One owner. Delta 12" X 39" Variable Speed wood lathe with stand. 16" swing over gap. Model number 46-541S. One HP motor. Clean in good working condition. Pick-up only. Central coastal California (2-hours north of Santa Barbara, 4-hours south of San Francisco). Asking $670. Please call to make arrangements to see (Morro Bay, CA) or for more detailed description: Bill Badland - (805) 772-1628. Email - Bill... I'll pass the word around to our RV friends.... We go to Morro Dunes several times a year, (about 3 hours from Clovis), and several of the RV'ers are woodworkers.. mac Please remove splinters before emailing |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
Mac,
Thanks much. Bill Badland |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
Bill,
Something to think about would be to contact the local woodturners association and ask them to auction it off at the next meeting. It would be alive auction which usually brings the price over what you are asking and you can start the auction at $670 if you want. It would be nice if you offered anything over $670 to be a donation to the club. If you don't want to bother with an auction, then at least ask them to make an annoucement at the meeting that you are selling the lathe. San Franscisco's East Bay Area Club: www.bayareawoodturners.org contact Jim Rodgers 925-229-5773 Central Coast Woodturners of California Contact George Paes 805-929-1423 |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
In article ,
mac davis wrote: On Tue, 27 Dec 2005 22:01:05 GMT, Bill Badland wrote: One owner. Delta 12" X 39" Variable Speed wood lathe with stand. 16" swing over gap. Model number 46-541S. One HP motor. Clean in good working condition. Pick-up only. Central coastal California (2-hours north of Santa Barbara, 4-hours south of San Francisco). Asking $670. Please call to make arrangements to see (Morro Bay, CA) or for more detailed description: Bill Badland - (805) 772-1628. Email - Bill... I'll pass the word around to our RV friends.... We go to Morro Dunes several times a year, (about 3 hours from Clovis), and several of the RV'ers are woodworkers.. That's a lot more lathe then would fit in any RV, except a Toy Hauler -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
On Thu, 29 Dec 2005 07:33:09 -0800, Ralph E Lindberg wrote:
In article , mac davis wrote: On Tue, 27 Dec 2005 22:01:05 GMT, Bill Badland wrote: One owner. Delta 12" X 39" Variable Speed wood lathe with stand. 16" swing over gap. Model number 46-541S. One HP motor. Clean in good working condition. Pick-up only. Central coastal California (2-hours north of Santa Barbara, 4-hours south of San Francisco). Asking $670. Please call to make arrangements to see (Morro Bay, CA) or for more detailed description: Bill Badland - (805) 772-1628. Email - Bill... I'll pass the word around to our RV friends.... We go to Morro Dunes several times a year, (about 3 hours from Clovis), and several of the RV'ers are woodworkers.. That's a lot more lathe then would fit in any RV, except a Toy Hauler Most of them drive 3/4 or 1 ton pickups.. no problem... mac Please remove splinters before emailing |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
In article ,
mac davis wrote: ... That's a lot more lathe then would fit in any RV, except a Toy Hauler Most of them drive 3/4 or 1 ton pickups.. no problem... ... and they would work where? in the back of the truck? The only full-timer I know that does serious wood-working has a cargo trailer that his MH tows, but all he has is bench-top tools -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
Selling my Delta Lathe. Pick-up only. Central Coastal CA
On Fri, 30 Dec 2005 06:51:42 -0800, Ralph E Lindberg wrote:
In article , mac davis wrote: .. That's a lot more lathe then would fit in any RV, except a Toy Hauler Most of them drive 3/4 or 1 ton pickups.. no problem... .. and they would work where? in the back of the truck? The only full-timer I know that does serious wood-working has a cargo trailer that his MH tows, but all he has is bench-top tools I think you misunderstood me, Ralph... I didn't mean to infer that they'd use it IN their RV, but that Morro Bay was a frequent stop for rv folks around the Fresno area and they could look at/buy it when they were in the area.. mac Please remove splinters before emailing |
| All times are GMT +1. The time now is 08:58 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter