DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodturning (https://www.diybanter.com/woodturning/)
-   -   Yates American J-170 lathe (https://www.diybanter.com/woodturning/111638-yates-american-j-170-lathe.html)

Kudzu July 6th 05 04:06 PM

Yates American J-170 lathe
 
Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to
take a loot at it.

Kudzu July 7th 05 04:14 AM



JAMES RISER July 7th 05 09:32 AM

Is it like mine?
http://www.jamesriser.com/Magic/Maki...Lathe005sm.jpg

--
James P. Riser
Http://www.JamesRiser.com
"Kudzu" wrote in message
...
Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to take
a loot at it.




Kudzu July 7th 05 02:40 PM

JAMES RISER wrote:
Is it like mine?
http://www.jamesriser.com/Magic/Maki...Lathe005sm.jpg

BINGO!!

Martin Rost July 7th 05 04:24 PM

James,
I went to your home page, really neat turnings and metal spinning.
Martin

"JAMES RISER" wrote in message
ink.net...
Is it like mine?
http://www.jamesriser.com/Magic/Maki...Lathe005sm.jpg

--
James P. Riser
Http://www.JamesRiser.com
"Kudzu" wrote in message
...
Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to

take
a loot at it.







JAMES RISER July 7th 05 06:38 PM

I love this old industrial lathe. It is heavy (650 pounds or so), solid,
and reliable. The variable speed works nicely. Mine is 3 phase; but a
different motor could easily be installed. I did have a spindle adapter
made to change the spindle to 1"-8. The original 1 1/8"-8 is a little
difficult to find fittings for. With a 1 1/8"-8 tap I can easily make my
own faceplates etc. as needed. Mine does not have the gap bed; but that is
not the type of turning I do - so I do not require more than 12" of swing.
These are nice machines that can take continuous work without falling apart.
What else do you need to know?
--
James P. Riser
Http://www.JamesRiser.com
"Kudzu" wrote in message
...
JAMES RISER wrote:
Is it like mine?
http://www.jamesriser.com/Magic/Maki...Lathe005sm.jpg

BINGO!!




JAMES RISER July 7th 05 06:41 PM

Martin;
Thanks, I try.
Jim

--
James P. Riser
Http://www.JamesRiser.com
"Martin Rost" rostmartin @ hot mail . com wrote in message
...
James,
I went to your home page, really neat turnings and metal spinning.
Martin

"JAMES RISER" wrote in message
ink.net...
Is it like mine?
http://www.jamesriser.com/Magic/Maki...Lathe005sm.jpg

--
James P. Riser
Http://www.JamesRiser.com
"Kudzu" wrote in message
...
Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to

take
a loot at it.









Kudzu July 8th 05 01:09 AM

You told me most of what I was wondering. One thing I have not gotten a
good answer on is what is it's lowest speed? I have heard/deduced that
around 700 rpms is typical for other j-line models. So does that sound
about right? I want something slower but otherwise I like what I am
hearing about this lathe.I will be turning lots of large unbalanced
blanks so slower speeds are essential.

The one I am looking at has a 3 phase motor and I am seriously
considering just adding a VF Drive to it. Program it for say 3 fixed
speeds on the motor and using the lathes variable speed control. Does
that sound feasible? Or would it be better to just go full electronic
speed control and skip the reves drive?

Once I get it in the shop and torn apart that will really help me decide.


James Riser July 8th 05 04:51 AM

The manual indicates a speed range from 630-3450. This works well for me.
Most of my turnings are done at full speed. Putting a VFD along with the
current drive would work fine. Yes, I have the manual and parts diagrams
;-)
Jim

"Kudzu" wrote in message
...
You told me most of what I was wondering. One thing I have not gotten a
good answer on is what is it's lowest speed? I have heard/deduced that
around 700 rpms is typical for other j-line models. So does that sound
about right? I want something slower but otherwise I like what I am
hearing about this lathe.I will be turning lots of large unbalanced blanks
so slower speeds are essential.

The one I am looking at has a 3 phase motor and I am seriously considering
just adding a VF Drive to it. Program it for say 3 fixed speeds on the
motor and using the lathes variable speed control. Does that sound
feasible? Or would it be better to just go full electronic speed control
and skip the reves drive?

Once I get it in the shop and torn apart that will really help me decide.




Ken Moon July 8th 05 05:31 AM


"Kudzu" wrote in message
...

SNIP---------
The one I am looking at has a 3 phase motor and I am seriously considering
just adding a VF Drive to it. Program it for say 3 fixed speeds on the
motor and using the lathes variable speed control. Does that sound
feasible? Or would it be better to just go full electronic speed control
and skip the reves drive?

===============
All electronic is OK if you have enough horse power. Otherwise, the Reeves
drive can give you additional torque at low RPMs. If the low end is in the
500-700 RPM range now, you can go that low mechanically, then drop down to
200-300 RPM with the VFD and still not lose turning torque.

Ken Moon
Webberville, TX.



Kudzu July 8th 05 11:27 PM

If I do buy this lathe and I think I am. Would you be willing to make me
a copy of the manual?
I am not asking for a freebie. I would be happy to pay for doing this.

The part diagram would be great to have when I start to rebuild it!!

James Riser July 9th 05 01:35 AM

That's why I mentioned that I had it ;-) I thought you'd be interested. If
you get the lathe, you'll get a copy of the manual.
Jim
"Kudzu" wrote in message
...
If I do buy this lathe and I think I am. Would you be willing to make me a
copy of the manual?
I am not asking for a freebie. I would be happy to pay for doing this.

The part diagram would be great to have when I start to rebuild it!!




James Riser July 13th 05 07:34 PM

Kudzu;
Send me another email. I have the manual scanned; but your email went out
with the trash.
Jim

"Kudzu" wrote in message
...
Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to take
a loot at it.




Kudzu July 15th 05 03:00 PM

Thanks Joe! I had visited that site but now seen the manuals on it.
Guess I need to dig a little deeper!

john[_24_] April 24th 16 12:44 AM

Yates American J-170 lathe
 
replying to James Riser , john wrote:
jriser wrote:

Kudzu;
Send me another email. I have the manual scanned; but your email went
out
with the trash.
Jim

"Kudzu" wrote
in message
...
Looking for someone that owns or maybe has used one of these

lathes. I
have located a used one and would like a littl info before I drive

to take
a loot at it.





are there still parts available for the Yates American J-170 lathe


--



matt p September 5th 18 05:44 AM

Yates American J-170 lathe
 
replying to Kudzu , matt p wrote:
kudzupatchtakethisout wrote:

Looking for someone that owns or maybe has used one of these lathes. I
have located a used one and would like a littl info before I drive to
take a loot at it.


did you find info on this lathe i need to find a motor and new belts


--




All times are GMT +1. The time now is 01:01 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter