diy trolley for heavy amp!
dave wrote:
I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) http://www.screwfix.com/ have lots of wheels that may suit. Alternatively, wander round a large DIY store, looking for stuff that might work. |
diy trolley for heavy amp!
"dave" wrote in message ... I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) A search under Dexion should find the parts you are after. Richard. |
diy trolley for heavy amp!
On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote:
I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) I made something similar to this by making a wooden frame using 100x50mm timber, lap jointed and glued and screwed at the corners and then a piece of 18mm ply on the top. I bought some industrial castors from RS Components (but only because I was ordering some other stuff. They are pretty widely available. I have moved around items weighing 100kg on this, so it would handle the 50kg that you are looking for easily. ..andy To email, substitute .nospam with .gl |
diy trolley for heavy amp!
On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote:
trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - Just a lump of board the same size as the amp or perhaps 1/2" bigger all round to take the knocks and four beefy castors. For the board I'd be more inclined to use 18mm ply rather than chip and castors with soft wheels about 3" dia, preferably with brakes so it doesn't roll off a non-flat stage. B-) Bigger sheds, such as B&Q Warehouses do big casters but not sure if any have brakes. -- Cheers Dave. pam is missing e-mail |
diy trolley for heavy amp!
"dave" wrote in message ... I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) Why not just bolt the wheels Maplin sell for this purpose directly onto the amp which I assume at that weight includes the speakers. Though not if it's an Orange !! |
diy trolley for heavy amp!
dave wrote in message ... I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) The last time I bought Dexion, there was a MOQ of several lengths. Consider salvaging old angle iron from a bedstead instead. Also consider heavy duty plywood which will be much more durable than chipboard especially if it ever gets wet!! Whereabouts are you? I might well have some dexion lurking in the garage. bobdotminchinatntlworlddotcom Regards Bob |
diy trolley for heavy amp!
Andy Hall wrote:
On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". ... I made something similar to this by making a wooden frame using... Andy Hall rocking out in front of his bass amp? Can't picture it somehow. .andy -- Toby. 'One day son, all this will be finished' |
diy trolley for heavy amp!
dave wrote in
: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) There was a very good construction material we useter use, it was square section tube with corner, angle bits etc. WE made bespoke monitor, tape m/c trolleys with it, but I'm buggered if I can remember the name. Perhaps someone can (cue Plowman..) Oh, I got it - speedframe http://www.dexion.co.uk/products/construckits/page.htm mike |
diy trolley for heavy amp!
In article 0,
mike ring wrote: There was a very good construction material we useter use, it was square section tube with corner, angle bits etc. WE made bespoke monitor, tape m/c trolleys with it, but I'm buggered if I can remember the name. Perhaps someone can (cue Plowman..) Thames used welded square tube - but then they had pretty decent workshops. Oh, I got it - speedframe Yup - I made some stands for Spendor BC1s using the satin chrome version of this. I'd say it's a bit expensive for a transporting trolley - it's really as it is to look good. Ordinary Dexion would be good enough - and stronger. The Speedframe might seperate at the joints as it's only a tight push fit. -- *If a mute swears, does his mother wash his hands with soap? Dave Plowman London SW To e-mail, change noise into sound. |
diy trolley for heavy amp!
On Sun, 11 Jul 2004 22:15:05 +0100, "Toby"
wrote: Andy Hall wrote: On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". ... I made something similar to this by making a wooden frame using... Andy Hall rocking out in front of his bass amp? Can't picture it somehow. Neither can I :-) Moving machinery around?.... ..andy To email, substitute .nospam with .gl |
diy trolley for heavy amp!
Andy Hall wrote in message . ..
On Sun, 11 Jul 2004 22:15:05 +0100, "Toby" wrote: Andy Hall wrote: On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". ... I made something similar to this by making a wooden frame using... Andy Hall rocking out in front of his bass amp? Can't picture it somehow. Neither can I :-) Moving machinery around?.... What about something like.... http://www.axminster.co.uk/default.asp?part=708118 .andy To email, substitute .nospam with .gl |
diy trolley for heavy amp!
"Andy Hall" wrote in message ... On Sun, 11 Jul 2004 22:15:05 +0100, "Toby" wrote: Andy Hall wrote: On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". ... I made something similar to this by making a wooden frame using... Andy Hall rocking out in front of his bass amp? Can't picture it somehow. Only if Makita branched out into guitars :-) Neither can I :-) Moving machinery around?.... .andy To email, substitute .nospam with .gl |
diy trolley for heavy amp!
"Steve" wrote in message ... Andy Hall wrote: On Sun, 11 Jul 2004 20:02:20 GMT, dave wrote: I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". ... I made something similar to this by making a wooden frame using... Andy Hall rocking out in front of his bass amp? Can't picture it somehow. Only if Makita branched out into guitars :-) Given the way all Japanese companies are grouped into larger conglomerates, you'll probably find a sister company is. |
diy trolley for heavy amp!
"Dave Liquorice" wrote in message ill.com...
Just a lump of board the same size as the amp or perhaps 1/2" bigger all round to take the knocks and four beefy castors. For the board I'd be more inclined to use 18mm ply rather than chip and castors with soft wheels about 3" dia, preferably with brakes so it doesn't roll off a non-flat stage. B-) exactly. But I'd make it more than 1/2" bigger, thats not enough to offer any protection, and may be lost in time from rough handling. 2-3 inches maybe. And definitely radius the corners. G&M said: Why not just bolt the wheels Maplin sell for this purpose directly onto the amp which I assume at that weight includes the speakers. Indeed - though the trolley could be used for lots of other kit too. Regards, NT |
diy trolley for heavy amp!
"Dave Liquorice" wrote in message ill.com...
Just a lump of board the same size as the amp or perhaps 1/2" bigger all round to take the knocks and four beefy castors. For the board I'd be more inclined to use 18mm ply rather than chip and castors with soft wheels about 3" dia, preferably with brakes so it doesn't roll off a non-flat stage. B-) exactly. But I'd make it more than 1/2" bigger, thats not enough to offer any protection, and may be lost in time from rough handling. 2-3 inches maybe. And definitely radius the corners. G&M said: Why not just bolt the wheels Maplin sell for this purpose directly onto the amp which I assume at that weight includes the speakers. Indeed - though the trolley could be used for lots of other kit too. Regards, NT |
diy trolley for heavy amp!
"Steve" wrote
| "Andy Hall" wrote | Andy Hall rocking out in front of his bass amp? | Can't picture it somehow. | Only if Makita branched out into guitars :-) Hey Makita you're my drill In your little corner of the shed You could drill through all my walls And never need recharging all the day Oh I saw you drill the wall Ten of your torque settings all correct With chuck that held the bit so firm The chuck key a captive on the cord. Oh Makita you'll know everything about my home I’ll always know how good it feels to hold you Makita I need you so My Makita never wavers over any given line Drilling ten long deep holes in a row Oh yes, Makita you will always know Oh how I always dream of thee Do I ever count the big holes that you drill When I coil your power wire Makita so I count your bits are right And if there comes a time Guns and gates no longer hold me in And if I'm free to make a choice I'll buy a chop saw as your friend (With apologies to Elton John / Bernie Taupin) Owain |
diy trolley for heavy amp!
On Mon, 12 Jul 2004 22:37:15 +0100, "Owain"
strung together this: Hey Makita you're my drill In your little corner of the shed You could drill through all my walls And never need recharging all the day Oh I saw you drill the wall Ten of your torque settings all correct With chuck that held the bit so firm The chuck key a captive on the cord. Oh Makita you'll know everything about my home I’ll always know how good it feels to hold you Makita I need you so My Makita never wavers over any given line Drilling ten long deep holes in a row Oh yes, Makita you will always know Oh how I always dream of thee Do I ever count the big holes that you drill When I coil your power wire Makita so I count your bits are right And if there comes a time Guns and gates no longer hold me in And if I'm free to make a choice I'll buy a chop saw as your friend Erm too much spare time Owain! -- SJW A.C.S. Ltd |
diy trolley for heavy amp!
dave wrote:
I'd like to make a trolley to move a rather heavy (100lbs) bass guitar amplifier around. The footprint is 24" x 14". I had in mind a beefy chipboard base in a Dexian(sp) or aluminium angle frame with 4 spring-loaded or rubber wheels at the corners. I'm ok with the chipboard! - but trouble is where to get the Dexian/al angle and wheels? Any supplier details appreciated - as are there any better suggestion (for the trolly that is :-) ) www.adamhall.com sells everything you need to make pro flightcases for band equipment |
diy trolley for heavy amp!
"Lurch" wrote
| "Owain" strung together this: | Hey Makita you're my drill | In your little corner of the shed | You could drill through all my walls | And never need recharging all the day ..... | And if there comes a time | Guns and gates no longer hold me in | And if I'm free to make a choice | I'll buy a chop saw as your friend | Erm too much spare time Owain! It took hardly any time to do, and I'd only have been watching telly if I wasn't usenetting. Owain |
diy trolley for heavy amp!
Andy Hall wrote in message . ..
I made something similar to this by making a wooden frame using 100x50mm timber, lap jointed and glued and screwed at the corners and then a piece of 18mm ply on the top. I bought some industrial castors from RS Components (but only because I was ordering some other stuff. They are pretty widely available. I have moved around items weighing 100kg on this, so it would handle the 50kg that you are looking for easily. I also made something very similar by buying some 25mm square ali tube and some 16guage ali sheet. I used a Workmate to clamp the sheet and a length of wood to fold over the edges to make a sort of tray that sits in the tubular frame, with flanges going over the top of the frame. The whole lot was pop rivetted together and some heavy duty castors bolted on ( I got mine from RS ). It doesn't weigh too much, is unaffected by rain and has lasted for about 15 years so far and is still in excellent nick. It's worth getting a pair of non-steerable wheels ( they're much cheaper anyway ) and a pair of steerable lockable castors. You'll be able to steer it very easily and the brakes will ensure that you can leave it on a gentle slope with a fair chance of it staying put. |
All times are GMT +1. The time now is 02:00 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter