Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Worcester 280 combi boiler problem
Yet another combi boiler problem ;o)
Last week my radiators were getting warm when I ran the hot water so called a local central heating company. A new divertor valve has been fitted but then, the next day the system wouldn't light and heat hot water, cut out valve thingymabob popped up and there was a terrible banging noise. Yesterday the engineer came back and told me it was air in the system and he fiddled with it, bled it, topped up the water etc and ran the hot tap for a while. Everything seemed fine, ran a shower ok this morning but this evening when I ran the hot tap, same thing, banging, water cuts out, valve pops up. That's when I noticed the pressure gauge had plummeted from 2 to half way between 1 and 0. I'll be phoning the engineer in teh morning but anyone got any ideas what can be causing this air to get in the system? I'm happy to top the system and it usually needs it a couple of times a year along with the radiotors bled but I don't even want to think about fiddling with it at the moment! Any suggestions appreciated Thanks Lindsey |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
new Worcester Bosch install / boiler problem | UK diy | |||
Problem with water tempature and a Worcester 28CDi combi | UK diy | |||
Possible problem with Worcester 28CDi boiler | UK diy | |||
Hot water problem with my combi boiler | UK diy | |||
Worcester combi boiler not always firing | UK diy |