UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Charlie
 
Posts: n/a
Default Mains pressure shower booster pumps

Hi

I consider myself a relativly competent DIYer, and have a clean basic
looking shower, but the pressure is irritatimgly low. I'd loath to buy
one of those wall mounted power showers (anyway my wife would never
allow it) so i went to B&Q to buy a pump to put in line under the
bath... Once I got home i discovered it was not for use with mains
pressure water...

I have two questions really, what is likely to be the consequences of
using this 2 bar pump... and if they are likely to be dire, is there
such a thing as a pump that can handle mains pressure?

any guidance or advice is welcome

Thanks

Charlie

  #2   Report Post  
Doctor Evil
 
Posts: n/a
Default


"Charlie" wrote in message
oups.com...
Hi

I consider myself a relativly competent DIYer, and have a clean basic
looking shower, but the pressure is irritatimgly low. I'd loath to buy
one of those wall mounted power showers (anyway my wife would never
allow it) so i went to B&Q to buy a pump to put in line under the
bath... Once I got home i discovered it was not for use with mains
pressure water...

I have two questions really, what is likely to be the consequences of
using this 2 bar pump... and if they are likely to be dire, is there
such a thing as a pump that can handle mains pressure?

any guidance or advice is welcome

Thanks

Charlie


You can't put a pump on amains supply. You have to take it off a tank or
cylinder. Ever through of having the mains uprated from street? A lot
cheaper than an expensive pump and all problems solved




_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account
  #3   Report Post  
Charlie
 
Posts: n/a
Default

How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..

  #4   Report Post  
Doctor Evil
 
Posts: n/a
Default


"Charlie" wrote in message
oups.com...
How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..


Dug up and new pipe installed.



_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account
  #5   Report Post  
Doctor Evil
 
Posts: n/a
Default


"Charlie" wrote in message
oups.com...
How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..


Dug up and new pipe installed.







_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account


  #6   Report Post  
basil
 
Posts: n/a
Default

On 27 Feb 2005 15:36:02 -0800, "Charlie"
wrote:

How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..


Unless your door opens right onto the street its going to cost more
than a pump!
  #7   Report Post  
Tim S
 
Posts: n/a
Default

On Mon, 28 Feb 2005 00:18:02 +0000, Doctor Evil wrote:


"Charlie" wrote in message
oups.com...
How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..


Dug up and new pipe installed.


Not necessarily a full destruction of the drive. When my Dad's supply was
replaced. the water company dug 2 holes (one in the pavement around the
stopcock) and used a "mole" for the bit in between to make a hole through
which they shoved the pipe.

OK, still some destruction, but not as much effort to repair as a full
trench.

Tim
  #8   Report Post  
basil
 
Posts: n/a
Default

On Mon, 28 Feb 2005 08:36:02 +0000, Tim S wrote:


OK, still some destruction, but not as much effort to repair as a full
trench.

How much did it cost? and how far can the "mole" bore between holes?

Cheers
Basil
  #9   Report Post  
Tim S
 
Posts: n/a
Default

On Mon, 28 Feb 2005 16:05:34 +0000, basil wrote:

On Mon, 28 Feb 2005 08:36:02 +0000, Tim S wrote:


OK, still some destruction, but not as much effort to repair as a full
trench.

How much did it cost?


Sorry - don't know. Done by the water company some years ago for my Dad.

and how far can the "mole" bore between holes?


In this case, about 6-7 metres. I have no idea what the upper limit is.

Cheers
Basil


Cheers

Tim
  #10   Report Post  
Doctor Evil
 
Posts: n/a
Default


"basil" wrote in message
...
On 27 Feb 2005 15:36:02 -0800, "Charlie"
wrote:

How do you mean "uprated" is it a simple thing to do? or do they have
to dig everything up? i dont understand..


Unless your door opens right onto the street its going to cost more
than a pump!


You can't use a pump on the mains.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account


  #11   Report Post  
Doctor Evil
 
Posts: n/a
Default


"basil" wrote in message
...
On Mon, 28 Feb 2005 08:36:02 +0000, Tim S wrote:


OK, still some destruction, but not as much effort to repair as a full
trench.

How much did it cost? and how far can the "mole" bore between holes?

Cheers
Basil


Some will replace lead for free.


_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 120,000 groups
Unlimited download
http://www.usenetzone.com to open account
  #12   Report Post  
Christian McArdle
 
Posts: n/a
Default

A lot cheaper than an expensive pump and all problems solved

The cheapest new supply will be more expensive than the most expensive pump.

Not that it helps, as it is illegal to pump mains water.

Christian.



  #13   Report Post  
Charlie
 
Posts: n/a
Default

Ok, so in sumary it is illegal to pump from the mains... But then i
have to ask, should I still be using a pressure washer?? still the
point is moot...

I dont think the water supply being replaced is really an option,
sounds a bit of a nightmare... anyway the house is only 5 years old...
so what could possibly need replacing...

I think i will get a single sided pump and just boost the hot....

although i am intrigued, is pumping the mains just illegal, of does it
have physical consequences too?

Thanks to all

  #14   Report Post  
Bob Mannix
 
Posts: n/a
Default


"Charlie" wrote in message
oups.com...
Ok, so in sumary it is illegal to pump from the mains... But then i
have to ask, should I still be using a pressure washer?? still the
point is moot...


Pressure washers do (or should) cut out when the input pressure drops too
far (mine certainly does)


I dont think the water supply being replaced is really an option,
sounds a bit of a nightmare... anyway the house is only 5 years old...
so what could possibly need replacing...

I think i will get a single sided pump and just boost the hot....

although i am intrigued, is pumping the mains just illegal, of does it
have physical consequences too?


Yes. All water mains leak somewhere by small amounts. This is not a problem
as they are always under positive pressure and clean water is always flowing
out through the leaks. If someone puts a pump on the incoming main, there is
the disnct possibility of getting negative pressure (ie below that in the
pipe's surroundings) in the pipe. At this point contaminants will be drawn
in through the leaks, contaminating your (and other people's) drinking
water.

It is illegal, very antisocial and possibly dangerous.


--
Bob Mannix
(anti-spam is as easy as 1-2-3 - not)


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shower pumps Rob UK diy 6 December 31st 04 02:28 PM
Gravity fed Shower mixer ; cold from mains, hot from cylinder tank Ghazali UK diy 5 February 16th 04 12:22 PM
shower pressure Louigi Cornetto UK diy 1 September 1st 03 07:14 PM
New Condensing Boiler and Shower Bjorn UK diy 19 August 13th 03 03:54 PM
Venturi shower pressure problem Mark Trueman UK diy 0 July 19th 03 11:19 AM


All times are GMT +1. The time now is 05:51 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"