Hey, Ok dont laugh, can anyone help, I need to move a washing machine quite some distance from its present location.All pipe work in my house is imperial, at present the washing machine is tapped off 3/4 pipe with reducing solder joint to 15mm, then to a straight isolating valve with a 3/4 bsp fitting for the machine hose.
It would save me loads a time if I could fit a 3/4 bsp to 15 mm tap connector or some such to the exisiting isolating valve then pipe in copper to the new location. any views please

--------------------------------------------------------------------------------

"mike guitar" wrote in message
...

Hey, Ok dont laugh, can anyone help, I need to move a washing machine
quite some distance from its present location.All pipe work in my house
is imperial, at present the washing machine is tapped off 3/4 pipe with
reducing solder joint to 15mm, then to a straight isolating valve with
a 3/4 bsp fitting for the machine hose.
It would save me loads a time if I could fit a 3/4 bsp to 15 mm tap
connector or some such to the exisiting isolating valve then pipe in
copper to the new location. any views please

--------------------------------------------------------------------------------


--
mike guitar

I assume this is what you are looking for.
http://www.screwfix.com/app/sfd/cat/...94131&id=35800

Thanks Kaiser