Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
The type sold by B&Q and similar stores is quite thin, about 15 - 16
mm. Where could I get 19 - 20mm thickness? I'm looking for beech effect. MM |
#2
![]() |
|||
|
|||
![]() "MM" wrote in message ... The type sold by B&Q and similar stores is quite thin, about 15 - 16 mm. Where could I get 19 - 20mm thickness? I'm looking for beech effect. MM Probably the cheapest solution would be 'thin' kitchen worktops, but may not be wide enough. You could always go for the 'real' thing and go for veneered MDF, beech veneer is around £45 for a 19mm 2400x1200mm sheet (veneered both sides). Most timber merchants will order it for you. Dave |
#3
![]() |
|||
|
|||
![]()
On Sun, 16 Jan 2005 12:35:17 +0000, MM wrote:
The type sold by B&Q and similar stores is quite thin, about 15 - 16 mm. Where could I get 19 - 20mm thickness? I'm looking for beech effect. MM Some timber merchants sell it. Silvermans are an importer/distributor http://www.silverman.co.uk/index.php They only sell large quantities but they do list wood effect melamine on chipboard and mdf in thicknesses up to 30mm. A google on the brand names may throw up a retailer near you. Dave |
#4
![]() |
|||
|
|||
![]()
As David said, a lot of timber merchants sell it, try a Google search.
Problem I've found is that they will only sell 8 x 4 sheets and charge a fortune for delivery, so unless you can somehow collect it works out expensive. Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
### micro-FAQ on wood # 014 | Woodworking | |||
### micro-FAQ on wood # 010 | Woodworking | |||
Unwarping wood | UK diy | |||
How Much Wood Are You Willing to “Waste” (Long) | Woodworking | |||
QUESTION : What type of wood is safe to use for a cutting board ? | Woodworking |