Honeywell Smartfit Base Unit Problems
 

Hi

Our boiler is controlled via a honeywell Smartfit "Y" system and the
boiler started repeatedly relighting. The room unit then reported a
fault in the connection between it and the base unit.

The fault finding check list suggests

a) switch the unit off and on again, which I did but to no avail
b) replace the room unit, we have a spare 7 day unit so I tried using
that,
still the same.
c) replace the base unit.

The question is do you have to be corgi registered to do (c)?

Thanks

Ross

"RossG" wrote in message
om...
Hi

Our boiler is controlled via a honeywell Smartfit "Y" system and the
boiler started repeatedly relighting. The room unit then reported a
fault in the connection between it and the base unit.

The fault finding check list suggests

a) switch the unit off and on again, which I did but to no avail
b) replace the room unit, we have a spare 7 day unit so I tried using
that,
still the same.
c) replace the base unit.

The question is do you have to be corgi registered to do (c)?

Thanks

Ross


No.

RossG wrote:
Hi

Our boiler is controlled via a honeywell Smartfit "Y" system and the
boiler started repeatedly relighting. The room unit then reported a
fault in the connection between it and the base unit.

The fault finding check list suggests

a) switch the unit off and on again, which I did but to no avail
b) replace the room unit, we have a spare 7 day unit so I tried using
that,
still the same.
c) replace the base unit.

The question is do you have to be corgi registered to do (c)?

Thanks

Ross
If that was so, how could anyone work on the hot water?