Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
As we live in a remote country area and suffer the occasional
power-cut, we are toying with the idea of getting a portable generator to power the essentials at such times, especially as the predictions going around ATM don't inspire confidence for the future. The one we're thinking about is the Wolf 230V/2000W model (I assume AC), from Screwfix. Probably not cost-effective, but at least it'll keep the gas c/h, TV, lighting and freezers going. But before we splash out, I have some questions. We have a TT system with a 100A/100mA time delayed RCD at the 'front end', and a split-load CU with MCB's and a 30mA RCD on one half. Is it acceptable simply to run a cable from the generator to any socket in the house on one of the ring mains for example, to in effect power the whole house? Presumably the front-end RCD would need to be switched off before connecting the generator, both to avoid powering the neighbourhood (!) and to avoid nasty things happening when the mains power comes back on. Or do I have to power items individually and directly, independent of the house wiring, using a network of extension leads? If it's acceptable to connect the generator that way, the MCB on the ring connected to the generator would be powered 'backwards' as it were, IYSWIM, but the remaining MCB's would still be in 'forward' mode. Is this OK? Do RCD's work 'backwards' ? (The power from the house lights would run from the RCD side back through the RCD to the lighting MCB). I assume it's a good idea to isolate the high-power items such as the cooker and the immersion heater, to avoid accidental use and overload of the generator, although an appropriate fuse in the linking cable from the generator would probably do just as well. What happens to the earthing arrangements when using a portable generator in this way? As I said, we have a TT system with local earth rods. Do I have to rig up some sort of earth for the generator, or do I just ignore it, running the system as what I believe is called on the FAQ an IT system? Do the terms 'live' and 'neutral' have any significance when using such a generator? Is there anything that it's best not to power from a generator, such as a computer or other electronic equipment (but what hasn't got electronic circuits in it these days?), or fluorescent lights? -- Chris E-mail: christopher[dot]hogg[at]virgin[dot]net |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
generators | UK diy |