Making a circular saw jig
 

I have a circular saw jig which I made myself and it uses bits of aluminium which are L shaped in cross section for the saw to run in.

I'd like to make a better one with longer "rails" and rather than using the L shaped strips, which tend to sag, I'd like to use tubing and I know you can get some things that run along tubing and probably have ball bearing in, but I can't remember what they're called.

Can anyone tell me what these are called please so I can look them up online

Making a circular saw jig
 

On Monday, 24 May 2021 at 20:13:55 UTC+1, Murmansk wrote:
I have a circular saw jig which I made myself and it uses bits of aluminium which are L shaped in cross section for the saw to run in.

I'd like to make a better one with longer "rails" and rather than using the L shaped strips, which tend to sag, I'd like to use tubing and I know you can get some things that run along tubing and probably have ball bearing in, but I can't remember what they're called.

Can anyone tell me what these are called please so I can look them up online

Linear bearings.

https://www.automotioncomponents.co....rom-automotion

Tons and tons on ebay and ALiExpress, etc.

You might find you need to use solid rather than tube - but that is way down the line!

Making a circular saw jig
 

On 24/05/2021 20:13, Murmansk wrote:
I have a circular saw jig which I made myself and it uses bits of
aluminium which are L shaped in cross section for the saw to run in.

I'd like to make a better one with longer "rails" and rather than
using the L shaped strips, which tend to sag, I'd like to use tubing
and I know you can get some things that run along tubing and probably
have ball bearing in, but I can't remember what they're called.

Can anyone tell me what these are called please so I can look them up
online

I would call them linear bearings. They can be fully circular or part,
so to fit round shafts or guide rails respectively.

so:
linear bearing pillow
linear guide rail

An idea:
https://www.youtube.com/watch?v=UB80HojMDyg

Making a circular saw jig
 

Great, thanks very much!

Making a circular saw jig
 

On 24/05/2021 20:49, Fredxx wrote:
On 24/05/2021 20:13, Murmansk wrote:
I have a circular saw jig which I made myself and it uses bits of
aluminium which are L shaped in cross section for the saw to run in.

I'd like to make a better one with longer "rails" and rather than
using the L shaped strips, which tend to sag, I'd like to use tubing
and I know you can get some things that run along tubing and probably
have ball bearing in, but I can't remember what they're called.

Can anyone tell me what these are called please so I can look them up
online

IÂ* would call them linear bearings. They can be fully circular or part,
so to fit round shafts or guide rails respectively.

so:
linear bearing pillow
linear guide rail

An idea:
Â*https://www.youtube.com/watch?v=UB80HojMDyg

Yes, linear bearings. Available with or without shafts from people like
Euro Bearings.

They need to run on pretty accurate rod or tubing, which will add to the
cost. I'd have thought you could get away with plain bearings, probably
using one of the engineering plastics. Oilite bronze (on steel) would
also work, but oiled or greased brass/bronze on steel would tend to
attract sawdust.

Making a circular saw jig
 

I'm starting to think I could maybe use some drawer runners actually!

Making a circular saw jig
 

On 24/05/2021 21:23, newshound wrote:
On 24/05/2021 20:49, Fredxx wrote:
On 24/05/2021 20:13, Murmansk wrote:
I have a circular saw jig which I made myself and it uses bits of
aluminium which are L shaped in cross section for the saw to run in.

I'd like to make a better one with longer "rails" and rather than
using the L shaped strips, which tend to sag, I'd like to use tubing
and I know you can get some things that run along tubing and probably
have ball bearing in, but I can't remember what they're called.

Can anyone tell me what these are called please so I can look them up
online

IÂ* would call them linear bearings. They can be fully circular or
part, so to fit round shafts or guide rails respectively.

so:
linear bearing pillow
linear guide rail

An idea:
Â*Â*https://www.youtube.com/watch?v=UB80HojMDyg

Yes, linear bearings. Available with or without shafts from people like
Euro Bearings.

They need to run on pretty accurate rod or tubing, which will add to the
cost. I'd have thought you could get away with plain bearings, probably
using one of the engineering plastics. Oilite bronze (on steel) would
also work, but oiled or greased brass/bronze on steel would tend to
attract sawdust.

Ground steel rods are pretty common. Its then how you mount the rod,
whether to support it from underneath as per the video or at each end.

Most 3D printers use ones supported at each end, allowing for a complete
circular linear bearing.

I have seen the ones on guide rails used on very large machines such as
CNC routers.

The bearing will have seals which should keep dust and sawdust out of them.

Making a circular saw jig
 

On 24/05/2021 21:34, Murmansk wrote:
I'm starting to think I could maybe use some drawer runners actually!

I guess it depends on precision. Linear bearing generally have effective
dust seals.

For precision you can open ones that are adjustable:

https://www.ebay.co.uk/itm/324462847...AOSwSOFgDVQ F

Won't open drawer runners have an issue with collecting dust?