Choice of jigsaw
I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range.
One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Richard |
Choice of jigsaw
Tricky Dicky Wrote in message:
I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems we?ll recommended available from Amazon for 130. Can any one vouch for it or a better alternative in a similar price range. I have the one before without the gimmicky light, it's very good. One question is Orbital or Pendulum action the same thing and what are the pro?s and con?s of this. Richard http://www.powersawchannel.com/makit...-pros-and-cons -of-the-orbital-action-jig-saw/ -- Jimk ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Choice of jigsaw
On 15/10/2020 13:55, Tricky Dicky wrote:
I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Richard I have a Makita 4350 model and would highly recommend it. This jigsaw has 4 cutting actions (unlike some cheaper jigsaws) Quote:
0 Straight up/down 1 small orbit cutting 2 medium orbit cutting 3 large orbit cutting Mode 0 may/will give a cleaner cut and is required on some materials but can be a lot slower. If using a (specialised) upwards cutting blade, say, for laminate faced material then you don't want orbital blade movement. Mode 3 faster cutting on some materials and probably gives an acceptable result on those materials. However there are other settings :) Do some research on the different types of blades for different materials - it can make a big difference to your experience (on any jigsaw). -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
Choice of jigsaw
In article ,
Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for 130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. -- *Don't byte off more than you can view * Dave Plowman London SW To e-mail, change noise into sound. |
Choice of jigsaw
On 15/10/2020 13:55, Tricky Dicky wrote:
I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. Yup, a very good jigsaw, very smooth in operation, well made, solid cast ali baseplate, good blade support, variable speed, non marring sole plate, tool less blade change. I have been using one for years, and it redefines what you think a jigsaw is all about. As an alternative, look at the 4351 - that's the same basic machine but with the body grip case rather than the top handle. Some people prefer these when doing more intricate or detail work. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Yes, same thing. With it turned on, the blade moves away from the cut on the down stroke, and towards on the up stroke. Makes for a more aggressive (and less clean) cut, but with a significant increase in speed. (Pendulum 3, and an aggressive blade will cross cut a 8x2" in a couple of seconds for example) Pendulum off, and a finer toothed blade will make a cut in MDF that needs very little sanding (good for making templates etc). -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Choice of jigsaw
On 15/10/2020 14:28, alan_m wrote:
On 15/10/2020 13:55, Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Richard Mode 0 may/will give a cleaner cut and is required on some materials but can be a lot slower. If using a (specialised) upwards cutting blade, say, for laminate faced material then you don't want orbital blade movement. ITYM downward cutting blade (normal jigsaw blades are up cut). Do some research on the different types of blades for different materials - it can make a big difference to your experience (on any jigsaw). Yup, Makita's own blades are pretty good IME, and better than the Bosch I find (although Bosch have a very wide range of blades) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Choice of jigsaw
On 15/10/2020 14:52, Dave Plowman (News) wrote:
In article , Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. what about a (non random) orbital sander? Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. B&D made a thing of that at one time... Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. Which in the case of that model, is actually surprisingly fine. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Choice of jigsaw
On Thursday, 15 October 2020 at 15:42:11 UTC+1, John Rumm wrote:
On 15/10/2020 14:52, Dave Plowman (News) wrote: In article , Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. what about a (non random) orbital sander? Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. B&D made a thing of that at one time... Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. Which in the case of that model, is actually surprisingly fine. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ Thank you gentlemen you have convinced me its the Makita 4350 FCT. Local Toolsatan has one at the same as the Amazon price so may nip down and pick it up. Richard |
Choice of jigsaw
Tricky Dicky wrote:
I am looking at a Makita 4350FCT Also consider the 4351FCT, I prefer the "barrel" grip style. |
Choice of jigsaw
In article ,
John Rumm wrote: On 15/10/2020 14:52, Dave Plowman (News) wrote: In article , Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for 130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. what about a (non random) orbital sander? It still goes round. The drive is a rotating offset peg. So the pad takes an orbit. Attach a pencil to it and see what it draws out. Now do the same with a pendulum jigsaw. Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. B&D made a thing of that at one time... Was that who made it? Couldn't remember. ;-) Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. Which in the case of that model, is actually surprisingly fine. Any half decent jigsaw can cut thin stuff quite accurately. -- *I'm pretty sure that sex is better than logic, but I can't prove it. Dave Plowman London SW To e-mail, change noise into sound. |
Choice of jigsaw
On 15/10/2020 16:48, Andy Burns wrote:
Tricky Dicky wrote: I am looking at a Makita 4350FCT Also consider the 4351FCT, I prefer the "barrel" grip style. or DJV181Z if you have Makita 18V batteries and would prefer cordless... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Choice of jigsaw
Tricky Dicky Wrote in message:
On Thursday, 15 October 2020 at 15:42:11 UTC+1, John Rumm wrote: On 15/10/2020 14:52, Dave Plowman (News) wrote: In article , Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems we?ll recommended available from Amazon for 130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pro?s and con?s of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. what about a (non random) orbital sander? Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. B&D made a thing of that at one time... Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. Which in the case of that model, is actually surprisingly fine. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ Thank you gentlemen you have convinced me it?s the Makita 4350 FCT. Local Toolsatan has one at the same as the Amazon price so may nip down and pick it up. Richard Check what you get with it - case, blades etc, sometimes things sold in cardboard boxes to a price.... -- Jimk ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
Choice of jigsaw
On Thursday, 15 October 2020 at 17:01:35 UTC+1, John Rumm wrote:
On 15/10/2020 16:48, Andy Burns wrote: Tricky Dicky wrote: I am looking at a Makita 4350FCT Also consider the 4351FCT, I prefer the "barrel" grip style. or DJV181Z if you have Makita 18V batteries and would prefer cordless... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ Picked up the jigsaw and what a joy it is to use a quality tool. Thanks again for all the contributions. Richard |
Choice of jigsaw
In article ,
Tricky Dicky scribeth thus On Thursday, 15 October 2020 at 15:42:11 UTC+1, John Rumm wrote: On 15/10/2020 14:52, Dave Plowman (News) wrote: In article , Tricky Dicky wrote: I have come to the conclusion I need a decent jigsaw so I am looking at a Makita 4350FCT seems well recommended available from Amazon for £130. Can any one vouch for it or a better alternative in a similar price range. One question is Orbital or Pendulum action the same thing and what are the pros and cons of this. Perhaps our US cousins didn't understand pendulum. To me something that orbits goes round and round. what about a (non random) orbital sander? Would make an interesting jigsaw - although have seen ones where the blade can be rotated off the straight ahead position. B&D made a thing of that at one time... Pendulum describes it better - the blade moves forward when cutting and backwards on the downstroke. And you'd be hard pushed to find one without this action these days. But you should be able to switch it off for fine cutting - or rather as fine as a jigsaw can manage. Which in the case of that model, is actually surprisingly fine. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ Thank you gentlemen you have convinced me its the Makita 4350 FCT. Local Toolsatan has one at the same as the Amazon price so may nip down and pick it up. Richard Just do it you won't regret it I've got one thats why!, and seein's I'm well, a master craftsman what more recommendation dost thou need;)./... -- Tony Sayer Man is least himself when he talks in his own person. Give him a keyboard, and he will reveal himself. |
All times are GMT +1. The time now is 02:13 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004 - 2014 DIYbanter