Diagonal cables from hell?
 

https://youtu.be/PXgoGERgL4g?t=337

Diagonal cables from hell?
 

On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?



--
Adam

Diagonal cables from hell?
 

On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

Diagonal cables from hell?
 

On Thursday, 12 March 2020 23:52:31 UTC, Fredxx wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it wasn't there.

Diagonal cables from hell?
 

On Fri, 13 Mar 2020 00:58:44 -0700 (PDT), harry wrote:

On Thursday, 12 March 2020 23:52:31 UTC, Fredxx wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337

Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it wasn't there.

Well, there is a delay but, more importantly, there's clear warning whne the
drill hits the metal (based on 70 yo capping that's probably thicker than
modern stuff).
--
Peter.
The gods will stay away
whilst religions hold sway

Diagonal cables from hell?
 

"harry" wrote in message
...
On Thursday, 12 March 2020 23:52:31 UTC, Fredxx wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it
wasn't there.

Masonry drills won't.

Lonely Auto-contradicting Psychotic Senile Ozzie Troll Alert! LOL
 

On Fri, 13 Mar 2020 19:52:57 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

IME any sort of drill will go straight through metal capping as if it
wasn't there.

Masonry drills won't.

LOL Auto-contradicting senile asshole!

--
Kerr-Mudd,John addressing senile Rot:
"Auto-contradictor Rod is back! (in the KF)"
MID:

Diagonal cables from hell?
 

On 13/03/2020 08:38, PeterC wrote:
On Fri, 13 Mar 2020 00:58:44 -0700 (PDT), harry wrote:

On Thursday, 12 March 2020 23:52:31 UTC, Fredxx wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337

Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it wasn't there.

Well, there is a delay but, more importantly, there's clear warning whne the
drill hits the metal (based on 70 yo capping that's probably thicker than
modern stuff).


Don't you need 3mm steel to protect meter tails if, for example a
Wylex metal box in the party wall was origianl (and cant be
removed) but a new CU is located above, to the side, up and over
to the opposite wall, or wherever.

Diagonal cables from hell?
 

On 13/03/2020 08:52:57, Rod Speed wrote:


"harry" wrote in message
...
On Thursday, 12 March 2020 23:52:31 UTC, FredxxÂ* wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it
wasn't there.

Masonry drills won't.

That is my experience. They'll simply polish the galvanised channelling
and take ages to penetrate. PVC serves no protective purpose.

SDS is another matter.

Diagonal cables from hell?
 

On 13/03/2020 21:25, Fredxx wrote:
On 13/03/2020 08:52:57, Rod Speed wrote:


"harry" wrote in message
...
On Thursday, 12 March 2020 23:52:31 UTC, FredxxÂ* wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

IME any sort of drill will go straight through metal capping as if it
wasn't there.

Masonry drills won't.

That is my experience. They'll simply polish the galvanised channelling
and take ages to penetrate. PVC serves no protective purpose.

SDS is another matter.

Only girls use percussion drills.

--
Adam

Diagonal cables from hell?
 

On 12/03/2020 23:52, Fredxx wrote:
On 12/03/2020 20:06:57, ARW wrote:
On 12/03/2020 19:56, Andy Burns wrote:
https://youtu.be/PXgoGERgL4g?t=337


Any ideas why is he using metal capping?

Why not? It's very good protection against standard or hammer drills.

But easily penetrated by the nail of a picture hook.

Not actually BTWTTS but have fixed 2 instances of this happening.