Induction motors
 

What is the power difference approximately between a 700w motor and a 550w induction motor in a pillar drill ?

Induction motors
 

Are you talking about brushed motors vs induction motors? It really depends
on the design of the motors in question.
I feel that brushed motors generally have more torque, but there are
induction motors with control circuits these days that compensate for
saturation effects.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"fred" wrote in message
...
What is the power difference approximately between a 700w motor and a 550w
induction motor in a pillar drill ?

Induction motors
 

On Thu, 6 Feb 2020 11:50:33 -0800 (PST), fred
wrote:

What is the power difference approximately between a 700w motor and a 550w induction motor in a pillar drill ?

150w
--
Dave W

Induction motors
 

Dave W wrote:
On Thu, 6 Feb 2020 11:50:33 -0800 (PST), fred
wrote:

What is the power difference approximately between a 700w motor and a 550w induction motor in a pillar drill ?

150w

:)

Induction motors
 

In article ,
fred wrote:
What is the power difference approximately between a 700w motor and a
550w induction motor in a pillar drill ?

Mine is a 500w induction motor and have rarely found it lacking in torque.
Although I only ever use the lowest speed gearing anyway.

The previous one was IIRC 350w and prone to stall when using things like a
hole saw.

Of course as with everything, you can never have excess power. ;-)

--
*Sherlock Holmes never said "Elementary, my dear Watson" *

Dave Plowman London SW
To e-mail, change noise into sound.

Induction motors
 

On Friday, February 7, 2020 at 12:49:14 AM UTC, Dave Plowman (News) wrote:
In article ,
fred wrote:
What is the power difference approximately between a 700w motor and a
550w induction motor in a pillar drill ?

Mine is a 500w induction motor and have rarely found it lacking in torque.
Although I only ever use the lowest speed gearing anyway.

The previous one was IIRC 350w and prone to stall when using things like a
hole saw.

Of course as with everything, you can never have excess power. ;-)

--
*Sherlock Holmes never said "Elementary, my dear Watson" *

Dave Plowman London SW
To e-mail, change noise into sound.

to paraphrase 'You cant' be too thin or too rich and now also too powerful'

Induction motors
 

"fred" wrote in message
...
On Friday, February 7, 2020 at 12:49:14 AM UTC, Dave Plowman (News) wrote:
In article ,
fred wrote:
What is the power difference approximately between a 700w motor and a
550w induction motor in a pillar drill ?

Mine is a 500w induction motor and have rarely found it lacking in
torque.
Although I only ever use the lowest speed gearing anyway.

The previous one was IIRC 350w and prone to stall when using things like
a
hole saw.

Of course as with everything, you can never have excess power. ;-)

to paraphrase 'You cant' be too thin or too rich and now also too
powerful'

You can actually be too thin, that can be the evidence that its killing you.

Induction motors
 

On Thu, 6 Feb 2020 11:50:33 -0800 (PST), fred wrote:

What is the power difference approximately between a 700w motor and a 550w induction motor in a pillar drill ?

Almost exactly equivalent to having a five legged horse and chopping a leg off.
But much depends on whether they are genuine UK/IEC horses fed on hay or chinese
ones fed on rice, fruit bats and snake remains :)

550W correctly reduced in speed via a pulley system and preferably a steel
geared gearbox will mean, at least with a correctly sharpened drill bit, you'll
easily be able to drill 1 inch diameter holes in mild steel plate. Restraining
the item you are drilling could be the bigger issue.

If it's a chinese horsepower without gearing then it could be 1/4" in plastic or
wood
--

Lonely Auto-contradicting Psychotic Senile Ozzie Troll Alert! LOL
 

On Fri, 7 Feb 2020 19:36:15 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


to paraphrase 'You cant' be too thin or too rich and now also too
powerful'

You can actually be too thin, that can be the evidence that its killing you.

You can obviously be too demented, you subnormal auto-contradicting senile
trolling pest!

--
Kerr-Mudd,John addressing senile Rot:
"Auto-contradictor Rod is back! (in the KF)"
MID:

Induction motors
 

In article ,
The Other Mike wrote:
550W correctly reduced in speed via a pulley system and preferably a
steel geared gearbox will mean, at least with a correctly sharpened
drill bit, you'll easily be able to drill 1 inch diameter holes in mild
steel plate. Restraining the item you are drilling could be the bigger
issue.

A 1" twist drill? Crikey. ;-)

--
*Even a blind pig stumbles across an acorn now and again *

Dave Plowman London SW
To e-mail, change noise into sound.

Induction motors
 

On Fri, 07 Feb 2020 11:12:11 +0000 (GMT), "Dave Plowman (News)"
wrote:

In article ,
The Other Mike wrote:
550W correctly reduced in speed via a pulley system and preferably a
steel geared gearbox will mean, at least with a correctly sharpened
drill bit, you'll easily be able to drill 1 inch diameter holes in mild
steel plate. Restraining the item you are drilling could be the bigger
issue.

A 1" twist drill? Crikey. ;-)

I have a set of 'blacksmiths drill bits' that go up to that size
(diameter g). I mainly use them when counter boring softer materials
on the lathe as they are quicker than say a 13mm bit then boring bar.

Cheers, T i m