I've put up my own shelves with proper brackets. But I see these "floating shelves" advertised. I thought, "What's holding them up?" Apparently there's no right angle involved, just a screw going straight into the back of the shelf out of the wall. How can that possibly support anything?

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

On Thu, 16 May 2019 19:27:29 +0100, Rod Speed wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of weight. Nothing without a 45 degree support can hold weight. Just try holding a car battery at arms length. Now support your arm at your elbow by using the other arm at 45 degrees.

On 16/05/2019 19:20, Commander Kinsey wrote:
I've put up my own shelves with proper brackets.* But I see these
"floating shelves" advertised.* I thought, "What's holding them up?"
Apparently there's no right angle involved, just a screw going straight
into the back of the shelf out of the wall.* How can that possibly
support anything?

We have a couple. They are full of books. No problems. Ours have ends
which have mounting screws. I've also put up others (for daughter)
which have a plate with rods which stick out. The shelf has holes the
rods fit into. Also used for books.

I confess I've been surprised how well they work.

I think ours came from Ikea. I suspect daughters' did as well but I
don't recall.



--
Always smile when walking, you never know where there is a camera ;-)

Remarkable Coincidences:
The Stock Market Crashes of 1929 and 2008 happened on the same
date in October. In Oct 1907, a run on the Knickerbocker Trust
Company led to the Great Depression.

On Thu, 16 May 2019 19:20:14 +0100, Birdbrain Macaw (aka "Commander Kinsey",
"James Wilkinson", "Steven ******","Bruce Farquar", "Fred Johnson, etc.),
the pathological resident idiot and attention whore of all the uk ngs,
blathered again:

FLUSH the abnormal sociopathic attention whore's latest idiotic,
attention-baiting bull**** unread again

--
ItsJoanNotJoann addressing Birdbrain Macaw's (now "James Wilkinson" LOL):
"You're an annoying troll and I'm done with you and your
stupidity."
MID:

--
AndyW addressing Birdbrain:
"Troll or idiot?...
You have been presented with a viewpoint with information, reasoning,
historical cases, citations and references to back it up and wilfully
ignore all going back to your idea which has no supporting information."
MID:

--
Phil Lee adressing Birdbrain Macaw:
"You are too stupid to be wasting oxygen."
MID:

--
Phil Lee describing Birdbrain Macaw:
"I've never seen such misplaced pride in being a ****ing moronic motorist."
MID:

--
Tony944 addressing Birdbrain Macaw:
"I seen and heard many people but you are on top of list being first class
ass hole jerk. ...You fit under unconditional Idiot and should be put in
mental institution.
MID:

--
Pelican to Birdbrain Macaw:
"Ok. I'm persuaded . You are an idiot."
MID:

--
DerbyDad03 addressing Birdbrain Macaw (now "James Wilkinson" LOL):
"Frigging Idiot. Get the hell out of my thread."
MID:

--
Kerr Mudd-John about Birdbrain Macaw (now "James Wilkinson" LOL):
"It's like arguing with a demented frog."
MID:

--
Mr Pounder Esquire about Birdbrain Macaw (now "James Wilkinson" LOL):
"the **** poor delivery boy with no hot running water, 11 cats and
several parrots living in his hovel."
MID:

--
Rob Morley about Birdbrain:
"He's a perennial idiot"
MID: 20170519215057.56a1f1d4@Mars

--
JoeyDee to Birdbrain
"I apologize for thinking you were a jerk. You're just someone with an IQ
lower than your age, and I accept that as a reason for your comments."
MID: l-september.org

--
Sam Plusnet about Birdbrain (now "James Wilkinson Sword" LOL):
"He's just desperate to be noticed. Any attention will do, no matter how
negative it may be."
MID:

--
asking Birdbrain:
"What, were you dropped on your head as a child?"
MID:

--
Christie addressing endlessly driveling Birdbrain Macaw (now "James
Wilkinson" LOL):
"What are you resurrecting that old post of mine for? It's from last
month some time. You're like a dog who's just dug up an old bone they
hid in the garden until they were ready to have another go at it."
MID:

--
Mr Pounder's fitting description of Birdbrain Macaw:
"You are a well known fool, a tosser, a pillock, a stupid unemployable
sponging failure who will always live alone and will die alone. You will not
be missed."
MID:

--
Richard to pathetic ****** Hucker:
"You haven't bred?
Only useful thing you've done in your pathetic existence."
MID:

--
about Birdbrain (now "James Wilkinson" LOL):
""not the sharpest knife in the drawer"'s parents sure made a serious
mistake having him born alive -- A total waste of oxygen, food, space,
and bandwidth."
MID:

--
Mr Pounder exposing sociopathic Birdbrain:
"You will always be a lonely sociopath living in a ******** with no hot
running water with loads of stinking cats and a few parrots."
MID:

--
francis about Birdbrain (now "James Wilkinson" LOL):
"He seems to have a reputation as someone of limited intelligence"
MID:

--
Peter Moylan about Birdbrain (now "James Wilkinson" LOL):
"If people like JWS didn't exist, we would have to find some other way to
explain the concept of "invincible ignorance"."
MID:

--
Lewis about nym-shifting Birdbrain:
"Typical narcissist troll, thinks his **** is so grand he has the right to
try to force it on everyone."
MID:

On Fri, 17 May 2019 04:27:29 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

FLUSH the two clinically insane prize idiots' latest idiotic drivel unread

....and nothing's left, again! G

--
Norman Wells addressing senile Rot:
"Ah, the voice of scum speaks."
MID:

"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

Just try holding a car battery at arms length. Now support your arm at
your elbow by using the other arm at 45 degrees.

See above.

The Ikea ones are really easy to put up as they provide a long metal strip, which you screw to the wall, and off this strip come the two long metal rods that go into holes in the shelf.

This arrangement makes it easy to hang as the rods are perfectly aligned with the holes in the shelf by being attached to the metal strip.

I came across another type of floating shelf that had rather clever fittings that had to be fitted into the wall in the right place but had an eccentric rod coming out of them so that you could adjust the position a bit by twisting them, also the holes in the shelf were actually narrow slots, allowing for a bit of error.

The worst sort are where you have two fittings that go into the wall and you have to position them with total accuracy and at exactly 90 degrees to the wall which is hard to achieve in practice.

On Fri, 17 May 2019 05:14:46 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:



See above.

All he can see above is you two prize idiots having another retarded
"conversation"!

--
dennis@home to retarded senile Rot:
"sod off rod you don't have a clue about anything."
Message-ID:

On Thu, 16 May 2019 19:48:43 +0100, Brian Reay, another mentally challenged,
troll-feeding, senile idiot, blathered:


We have a couple.

Are you talking about your two brain cells, troll-feeding senile idiot?

On Thu, 16 May 2019 20:14:46 +0100, Rod Speed wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Just try holding a car battery at arms length. Now support your arm at
your elbow by using the other arm at 45 degrees.

See above.

"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

Just try holding a car battery at arms length. Now support your arm at
your elbow by using the other arm at 45 degrees.

See above.

On Fri, 17 May 2019 08:15:27 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


Wrong, I said

I say you are a clinically insane 85-year-old trolling senile asshole,
senile Rodent!

--
Richard addressing Rot Speed:
"**** you're thick/pathetic excuse for a troll."
MID:

On Thu, 16 May 2019 23:15:27 +0100, Rod Speed wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****. Something needs to hold the weight at the front of the shelf, or immense forces appear at the back.

"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 23:15:27 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed

wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****.

Yep, but floating shelves work fine in some situations.

Something needs to hold the weight at the front of the shelf,

Yes, but the rods sticking out of the wall do that.

or immense forces appear at the back.

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

I hate them. So often they are not tight and slide out leaving stickyout
rods that are invisible until you bump into one :-)

Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Rod Speed" wrote in message
...
Commander Kinsey wrote
I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.
Apparently there's no right angle involved, just a screw going straight
into the back of the shelf out of the wall. How can that possibly
support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

Brian Gaff wrote

I hate them.

I don’t actually use them much, but that’s because I prefer proper
floor to ceiling shelves. I don’t even have a floating shelf for the
shower because I have a window ledge just out of the shower.

So often they are not tight and slide out leaving stickyout rods that are
invisible until you bump into one :-)

Yeah, obviously can be a problem for the blind.

"Rod Speed" wrote in message
...
Commander Kinsey wrote
I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.
Apparently there's no right angle involved, just a screw going straight
into the back of the shelf out of the wall. How can that possibly
support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

On Fri, 17 May 2019 09:54:16 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:



Nothing immense about it.

EVERYTHING immense about the degree of your and his stupidity!

--
"Anonymous" to trolling senile Rot Speed:
"You can **** off as you know less than pig **** you sad
little ignorant ****."
MID:

On Thu, 16 May 2019 12:38:16 -0700 (PDT), Murmansk, yet another mentally
challenged, troll-feeding, senile idiot, blathered:

The Ikea ones are really easy to put up as they provide a long metal

But easy enough for idiots like you who have problems putting up shelves but
no problem asking stupid questions on Usenet and feeding retarded trolls?
BG

On Fri, 17 May 2019 18:04:33 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

I hate them.

I don¢t actually use them much

Thanks, that's what everyone wanted to know, you self-opinionated,
self-important senile asshole troll!

--
dennis@home to retarded senile Rot:
"sod off rod you don't have a clue about anything."
Message-ID:

On 5/16/19 6:42 PM, Commander Kinsey wrote:
On Thu, 16 May 2019 23:15:27 +0100, Rod Speed wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets.* But I see these
"floating shelves" advertised.* I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****.* Something needs to hold the weight at the front of the shelf, or immense forces appear at the back.


To support the shelf properly, you should build support all the way down to the buildings footings.

On 17/05/2019 11:28, devnull wrote:



To support the shelf properly, you should build support all the way down
to the buildings footings.

Whatever the route, I can say with great confidence that the wall does
provide a load path all the way down to the footings. Adding a floating
shelf puts a relatively small bending moment on the wall at the anchor
points, that's all.

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

On 5/17/19 10:45 AM, newshound wrote:
On 17/05/2019 11:28, devnull wrote:



To support the shelf properly, you should build support all the way down to the buildings footings.

Whatever the route, I can say with great confidence that the wall does provide a load path all the way down to the footings. Adding a floating shelf puts a relatively small bending moment on the wall at the anchor points, that's all.

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Furthermore, you'll need to get a building permit and have the shelves inspected by the AHJ.

Failure to comply could result in fines and your insurance company could refuse to pay the claim if your house falls over.

On Fri, 17 May 2019 00:54:16 +0100, Rod Speed wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 23:15:27 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed

wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****.

Yep, but floating shelves work fine in some situations.

Something needs to hold the weight at the front of the shelf,

Yes, but the rods sticking out of the wall do that.

or immense forces appear at the back.

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

But the leverage. Hold a car battery at arms length with no support under your arm.

On Fri, 17 May 2019 09:04:33 +0100, Rod Speed wrote:

Brian Gaff wrote

I hate them.

I dont actually use them much, but thats because I prefer proper
floor to ceiling shelves. I dont even have a floating shelf for the
shower because I have a window ledge just out of the shower.

Brian prefers you reply at the top.

I have freestanding dexion shelves in the garage, several shelves in the house made of wood and proper mitred supports, and in the bathroom normal little glass shelves with proper attachments which aren't invisible and can take weight.

So often they are not tight and slide out leaving stickyout rods that are
invisible until you bump into one :-)

Yeah, obviously can be a problem for the blind.

Or anyone, as the stuff on the shelf is now on the floor broken into pieces.

"Rod Speed" wrote in message
...
Commander Kinsey wrote
I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.
Apparently there's no right angle involved, just a screw going straight
into the back of the shelf out of the wall. How can that possibly
support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

On Fri, 17 May 2019 11:28:15 +0100, devnull wrote:

On 5/16/19 6:42 PM, Commander Kinsey wrote:
On Thu, 16 May 2019 23:15:27 +0100, Rod Speed wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 20:14:46 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed
wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****. Something needs to hold the weight at the front of the shelf, or immense forces appear at the back.


To support the shelf properly, you should build support all the way down to the buildings footings.

Not required, the wall does that. All you need is to make the bracket not bend from 90 degrees to the wall.

On 5/17/2019 3:03 PM, Commander Kinsey wrote:
On Fri, 17 May 2019 00:54:16 +0100, Rod Speed
wrote:
....

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

But the leverage.* Hold a car battery at arms length with no support
under your arm.

I just did the moment arm balance below -- the rated 100 lb distributed
load on a 5" wide shelf is reasonably conservative compared to estimated
limits.

--

On Fri, 17 May 2019 15:48:02 -0500, dpb, the notorious, troll-feeding,
senile idiot, blathered:


I just did

You just DID feed the sociopathic attention whore again, you senile
troll-feeding idiot!

On Fri, 17 May 2019 21:48:02 +0100, dpb wrote:

On 5/17/2019 3:03 PM, Commander Kinsey wrote:
On Fri, 17 May 2019 00:54:16 +0100, Rod Speed
wrote:
...

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

But the leverage. Hold a car battery at arms length with no support
under your arm.

I just did the moment arm balance below -- the rated 100 lb distributed
load on a 5" wide shelf is reasonably conservative compared to estimated
limits.

I'd expect the shelves to split at some point. All that weight concentrated on one bit of wood.

"Commander Kinsey" wrote in message
news
On Fri, 17 May 2019 00:54:16 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news
On Thu, 16 May 2019 23:15:27 +0100, Rod Speed
wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 20:14:46 +0100, Rod Speed

wrote:



"Commander Kinsey" wrote in message
news On Thu, 16 May 2019 19:27:29 +0100, Rod Speed

wrote:

Commander Kinsey wrote

I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them
up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.

Apparently there's no right angle involved, just a screw
going straight into the back of the shelf out of the wall.
How can that possibly support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

But proper shelves have an angled bracket which can hold a lot of
weight.

But plenty don't need to hold a lot of weight and prefer the cleaner
look of a floating shelf which has no visible brackets at all.

Nothing without a 45 degree support can hold weight.

That's wrong too. I do mine that need to hold a lot of weigh
with a floor to ceiling rectangular welded frames made of
dexion slotted tubing with shelves that are fully adjustable
on 25mm spacings with the frames bolted to the walls.

So is there anything holding up the shelf apart from at the back?

Wrong, I said it's a RECTANGULAR frame, so the is one vertical at the
back of the shelf and another at the front at the front of the shelf.

So real shelves, not this floating ****.

Yep, but floating shelves work fine in some situations.

Something needs to hold the weight at the front of the shelf,

Yes, but the rods sticking out of the wall do that.

or immense forces appear at the back.

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

But the leverage. Hold a car battery at arms length with no support under
your arm.

They arent at arms length when on a floating shelf.

"Commander Kinsey" wrote in message
news
On Fri, 17 May 2019 09:04:33 +0100, Rod Speed
wrote:

Brian Gaff wrote

I hate them.

I dont actually use them much, but thats because I prefer proper
floor to ceiling shelves. I dont even have a floating shelf for the
shower because I have a window ledge just out of the shower.

Brian prefers you reply at the top.

I've never seen him confirm that when you have said that.

I have freestanding dexion shelves in the garage,

I do have one of those, that I originally built in the flat
before I built the house. Still have it next to the fridge
now, but thats only because I havent gotten around
to getting more slotted square dexion. They dont
bother to ship it here anymore. I did buy a whole pack
of it when I was building the house and thats what all
the floor to ceiling rectangular frames are made of.

several shelves in the house made of wood and proper mitred supports,

I dislike making things out of wood like that, prefer welded steel.

and in the bathroom normal little glass shelves with proper attachments
which aren't invisible and can take weight.

So often they are not tight and slide out leaving stickyout rods that
are
invisible until you bump into one :-)

Yeah, obviously can be a problem for the blind.

Or anyone, as the stuff on the shelf is now on the floor broken into
pieces.

Easy to ensure that they dont slide off the rods when installing them.

"Rod Speed" wrote in message
...
Commander Kinsey wrote
I've put up my own shelves with proper brackets. But I see these
"floating shelves" advertised. I thought, "What's holding them up?"

There is usually rods that go into the wall. Can be a bit fiddly to
get them in the right place so they slide into the shelf properly.
Apparently there's no right angle involved, just a screw going
straight
into the back of the shelf out of the wall. How can that possibly
support anything?

It's a decent sized pair of rods that stick out of the wall
that slide into holes in the shelves with most of them.

On Sat, 18 May 2019 08:51:02 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

FLUSH another load of the two prize idiots' endless sick drivel unread

....and nothing's left!

--
Sqwertz to Rot Speed:
"This is just a hunch, but I'm betting you're kinda an argumentative
asshole.
MID:

On Sat, 18 May 2019 08:58:49 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

FLUSH yet more of the two clinically insane village idiots' absolutely
idiotic drivel

....and much better air in here again!

--
Bill Wright to Rot Speed:
"That confirms my opinion that you are a despicable little ****."
MID:

"Commander Kinsey" wrote in message
news
On Fri, 17 May 2019 21:48:02 +0100, dpb wrote:

On 5/17/2019 3:03 PM, Commander Kinsey wrote:
On Fri, 17 May 2019 00:54:16 +0100, Rod Speed
wrote:
...

Nothing immense about it. That other one
you were shown will hold a 100lb weight fine.

But the leverage. Hold a car battery at arms length with no support
under your arm.

I just did the moment arm balance below -- the rated 100 lb distributed
load on a 5" wide shelf is reasonably conservative compared to estimated
limits.

I'd expect the shelves to split at some point.

They don't, because that weight presses the top part of the shelf against
the rods.
The bottom part of the shelf just stops it bending between the rods.

All that weight concentrated on one bit of wood.

But the wood is in compression and so wont split.

On Sat, 18 May 2019 09:32:27 +1000, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:


But the wood is in compression and so wont split.

So for how long are you two retards STILL going to go on about that ****?
Until one of you losers climaxes? BG

--
"Anonymous" to trolling senile Rot Speed:
"You can **** off as you know less than pig **** you sad
little ignorant ****."
MID:

On Friday, 17 May 2019 08:21:53 UTC+1, Brian Gaff wrote:
I hate them. So often they are not tight and slide out leaving stickyout
rods that are invisible until you bump into one :-)



Yes that's the last thing anyone wants is Rod getting in our way ;-)