IP 44 light fitting a bit broken
Just went to put a fitting in the bathroom - it's IP44, Class 1, pull
switch, to go into Zone 2 (more on this in another thread). The glass cover is a bit broken and that protects the lamp from below. However, the GU10 lamp has to be pushed in firmly as there's a seal in the socket - looks as if it does a good job. The glass cover doesn't actually seal fit closely to the body, so I assume that it's there mainly to protect a hot halogen lamp from being shattered by a splash of cold water. So, Im wondering if the fitting is still OK to install, as it's protected by seals top and bottom and will have a LED lamp. -- Peter. The gods will stay away whilst religions hold sway |
IP 44 light fitting a bit broken
On Wed, 20 Mar 2019 07:41:05 -0000, Brian Gaff wrote:
Well not quite sure what you mean by broken but as long as water cannot get to the connections I'd have thought it was fine, if there are issues then you will soon know! I do not like mains lamps in showers etc in any case, maybe I'm old fashioned. Brian This over the basin, so Zone 2. -- Peter. The gods will stay away whilst religions hold sway |
All times are GMT +1. The time now is 02:08 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter