UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 6,766
Default The fire alarm and the office chair

We have three mains powered, battery backed, linked fire sensors. Last
week - beep, beep, beep - then silence for several minutes. Usually the
sign that a battery needs replacement. None of the three are flashing,
so difficult to work out which one is complaining and the complaint is
irregular anyway.

So I decided they had been in a while, get three new batteries, so a
special trip to a local centre to get them, plus a spare. This after
checking the alarm's leaflet and seeing alkaline PP3.

Got back, more reading of the leaflet, to see how to remove head to
replace the batteries, then steps and remove an head. Remove head and
search inside in vain, to find a replaceable battery. Reread leaflet
and only the none mains version uses a PP3. Mains version uses a none
replaceable lithium. Admit defeat, put it all back and decide to ring
supplier, because it suggests it has a 10 year guarantee.

I delayed making the call until yesterday morning, sat down in my
office chair, in the small bedroom where I have a bit of office like
space to make the call.

Chair mechanism for the nth time slipped, so chair tries to deposit me
on the floor. Its a hydraulic up/down, with a lockable sprung lean
forward/ back. Lean lock keeps slipping.

It is a chair I was given 20 years ago from an office which was closing
down. I had a quick look at the locking system before, but ran out of
time before any progress.

Yesterday, I looked at buying replacement - around £70 plus the council
disposal cost another £20 and decided to have another go at fixing it.
Four hours later, I was still at it lean springs had both broken,
locking system worn out from slipping, hydraulic up/down fine, so I
decided to simply permanently fix the lean system, so it would no
longer move. Weld up a tubular T bracket, between under seat bracket
and hydraulic stem. That took the remainder of the day and too late to
ring about the fire alarm problem.

6am this morning, the beep-beep-beep starts again. Just a short series,
still not long enough to be certain where it is coming from,
but....This time I think I know where it is actually coming from. A
battery powered fire alarm in my loft workshop/radio shack.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
open office vs MS Office Oppie[_6_] Electronic Schematics 0 June 3rd 09 08:11 PM
Re-upholster an office chair? ameijers Home Repair 6 May 4th 06 08:44 PM
Gas Fire - Fire basket and gas engine or just a simple Valor gas fire? Farouq UK diy 2 March 6th 06 11:04 PM
Anyone link a fire alarm to the fire department WITHOUT going through a 3rd party? dean Home Repair 12 September 16th 05 08:11 PM
How Dare Could America Industrial Property Office Be In Conspiracy With Jungang International Patent Office To Make An Extravagant International Crime ? [email protected] Woodturning 2 June 5th 05 07:03 AM


All times are GMT +1. The time now is 07:10 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"