Restoring Ch system
 

Hi all

I am fitting a new bathroom rad today and thought I might take the opportunity to put some restoring/ protection stuff in whilst I am at it. System is around 10years old and i have a system boiler (no header tank)

I bought some CalChem 3 in 1 a few weeks ago
https://www.toolstation.com/shop/p45091?table=no

When trying to find it this morning I found I also had some fernox restorer which I assume to be an old version of this product (not sure how old)
https://www.tradingdepot.co.uk/ferno...ating-restorer

The fernox one says to put it in and run for at least an hour (older systems a week) and then flush.

The CalChem one says to put it in and leave it.

So my thinking was to out the fernox one in and leave it for a while (until the weather is a bit better and I can drain the entire system) drain it and then add the CalChem. Problem is the fernox is likely to be there a month.

So my questions
1. Is it worth doing both?
2. Anyone see any harm in leaving the fernox in longer?
3. They both say to drain, the entire system and then add to lowest rad to ensure it gets to all rads. Given the fernox is going to be there for some time thoughts on whether this is necessary?
4. Is all this agro worth it :)

Thanks

Lee.

Restoring Ch system
 

On Saturday, 3 February 2018 10:03:10 UTC, wrote:
Hi all

I am fitting a new bathroom rad today and thought I might take the opportunity to put some restoring/ protection stuff in whilst I am at it. System is around 10years old and i have a system boiler (no header tank)

I bought some CalChem 3 in 1 a few weeks ago
https://www.toolstation.com/shop/p45091?table=no

When trying to find it this morning I found I also had some fernox restorer which I assume to be an old version of this product (not sure how old)
https://www.tradingdepot.co.uk/ferno...ating-restorer

The fernox one says to put it in and run for at least an hour (older systems a week) and then flush.

The CalChem one says to put it in and leave it.

first things first:
http://wiki.diyfaq.org.uk/index.php/Corrosion_Inhibitor
So I wouldn't use calchem as inhibitor myself. As cleaner maybe.

So my thinking was to out the fernox one in and leave it for a while (until the weather is a bit better and I can drain the entire system) drain it and then add the CalChem. Problem is the fernox is likely to be there a month.

So my questions
1. Is it worth doing both?

not afaik

2. Anyone see any harm in leaving the fernox in longer?

see what the fernox product says. The one I used last said it can stay in indefinitely iirc.

3. They both say to drain, the entire system and then add to lowest rad to ensure it gets to all rads. Given the fernox is going to be there for some time thoughts on whether this is necessary?

it only needs to get in. But the standard advice is drain the system unless you know existing chems are compatible.

4. Is all this agro worth it :)

Thanks

Lee.

If you've got a magnetic filter fitted probably not. If not it likely is.


NT