Radiator valve (TRV) base for high heat output?
Are there any high flow TRV valve bases that would be sufficient for
about 2.1kW at delta-T=30K (so flow = 50-something) which is what the unit can put out on max fan speed? Got the plumbers coming to slap in CH in 2 weeks. The conservatory is getting a Myson LoLine RC 14-10 http://www.myson.co.uk/products/lo_line_rc.htm#tab-2 fan convector for fast heatup. I'm tossing up between radio (ZWave) rad valve or full zone valve. A zone valve is harder to setup as I'd need to actually wire it in - but we can fall back to this later if necessary. So I'd like to give a rad valve a try first - but it would be sensible to look for a valve that would suit a big radiator (to be fair I have a few rads with 2kW outputs too) Valve needs to have a Danfoss RA head fitting OR a Drayton screw thread (radio head has adaptors for both). Cheers :) Tim |
All times are GMT +1. The time now is 06:15 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter