waterproof Junction Box
Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted
for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. I will have to mount a suitable waterproof JB and fit a flex into the lamp. Any suggestions for a neat and suitable box that will neatly accomodate the cables and a flex. |
waterproof Junction Box
On 02/02/17 16:48, DerbyBorn wrote:
Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. I will have to mount a suitable waterproof JB and fit a flex into the lamp. Any suggestions for a neat and suitable box that will neatly accomodate the cables and a flex. Wiska boxes are generally OK for jobs like this and have 20mm threaded entries with a pierceable membrane - bottom entry can be done without a gland if strain relief is not required. Or any waterproof box (google TLC) and fit appropriate glands (Pratley glands exist for flat T+E cable) |
waterproof Junction Box
DerbyBorn Wrote in message:
Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. I will have to mount a suitable waterproof JB and fit a flex into the lamp. Any suggestions for a neat and suitable box that will neatly accomodate the cables and a flex. http://www.toolstation.com/shop/p30645? -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
waterproof Junction Box
jim k Wrote in message:
DerbyBorn Wrote in message: Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. I will have to mount a suitable waterproof JB and fit a flex into the lamp. Any suggestions for a neat and suitable box that will neatly accomodate the cables and a flex. http://www.toolstation.com/shop/p30645? Oops! http://www.toolstation.com/shop/p33304 -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
waterproof Junction Box
On 02/02/2017 16:48, DerbyBorn wrote:
Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. Is the gland at the bottom of the light? -- Adam |
waterproof Junction Box
ARW wrote in
: On 02/02/2017 16:48, DerbyBorn wrote: Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. Is the gland at the bottom of the light? Out of the back - and pointing upwards as the lamp is angled downwards. It was downwards on the original Halogen light. |
waterproof Junction Box
On 02/02/2017 19:31, DerbyBorn wrote:
ARW wrote in : On 02/02/2017 16:48, DerbyBorn wrote: Just replaced my Halogen Floodlight with a LED one from Screwfix. I opted for one without a lead. However the cables to the Halogen one were two "single and Earth" cables that came through the wall and these are not a good fit into the gland. Is the gland at the bottom of the light? Out of the back - and pointing upwards as the lamp is angled downwards. It was downwards on the original Halogen light. :-( But pretty much all IP rated boxes are the same. I do like these, however when I fit them and only use two entry points and fit the box so that the entry points are at sort of 4 and 8 o'clock (IYSWIM) And I fit a drain hole. -- Adam |
waterproof Junction Box
On 03/02/2017 18:14, ARW wrote:
:-( But pretty much all IP rated boxes are the same. I do like these, however when I fit them and only use two entry points and fit the box so that the entry points are at sort of 4 and 8 o'clock (IYSWIM) And I fit a drain hole. DOH. Forgot the link https://www.tlc-direct.co.uk/Products/GWBXR80.html -- Adam |
All times are GMT +1. The time now is 09:15 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter