what to replace a timber lintel with?
 

hi,
i am in a 1900's terraced house, divided in two maisonettes. mine is
the lower one, ground & basement floors. i am doing some work as it
was neglected and damp in the basement was left on its own.

there are two steps to access the house from the pavement, and under
this steps there is a coal hole. this can be access from the main
bedroom through a small door. water is filtering down the pavement and
the whole area is damp. there used to be a timber lintel supporting
the step above, but it just crumbled down, it was like a big sponge.

i cleared the space where the lintel was and have this measurements
for a new lintel,

length x width x height
1500 x 240 x 120 (mm)

this is the space left by the timber lintel, and i was unable to find
a new lintel of this size. the closest one is, 1500 x 215 x 100, which
seems a proper match.

i am a bit confused as the type of lintel i should use. i would like
to avoid timber as damp in that area will always appear. (got the
council for the loose pavement slabs, they came, it is better now, but
still water finds its way through.) the ones i've discovered so far
are concrete and steel lintels.

i read that concrete lintels need at least a number of brick courses
on top of them to perform properly. as it is just the step above it,
there must only be one or two courses on top of it.

..would a concrete lintel be alright as it is just a step and shouldn't
have to deal with more than, maybe, two big humans on top?

..if steel lintels are the way to go, are these lintels all rust proof,
or should i look for stainless steel only?

i'd appreciate any help/advice.

also, any good pointers as where to get the lintel from?


thanks and regards,
mat.

what to replace a timber lintel with?
 

"mat." wrote in message
...
hi,
i am in a 1900's terraced house, divided in two maisonettes. mine is
the lower one, ground & basement floors. i am doing some work as it
was neglected and damp in the basement was left on its own.

there are two steps to access the house from the pavement, and under
this steps there is a coal hole. this can be access from the main
bedroom through a small door. water is filtering down the pavement and
the whole area is damp. there used to be a timber lintel supporting
the step above, but it just crumbled down, it was like a big sponge.

i cleared the space where the lintel was and have this measurements
for a new lintel,

length x width x height
1500 x 240 x 120 (mm)

this is the space left by the timber lintel, and i was unable to find
a new lintel of this size. the closest one is, 1500 x 215 x 100, which
seems a proper match.

i am a bit confused as the type of lintel i should use. i would like
to avoid timber as damp in that area will always appear. (got the
council for the loose pavement slabs, they came, it is better now, but
still water finds its way through.) the ones i've discovered so far
are concrete and steel lintels.

i read that concrete lintels need at least a number of brick courses
on top of them to perform properly. as it is just the step above it,
there must only be one or two courses on top of it.

.would a concrete lintel be alright as it is just a step and shouldn't
have to deal with more than, maybe, two big humans on top?

.if steel lintels are the way to go, are these lintels all rust proof,
or should i look for stainless steel only?

i'd appreciate any help/advice.

also, any good pointers as where to get the lintel from?


thanks and regards,
mat.

Try looking through these pages:

http://www.killeshal.com/concrete_lintels.htm

http://www.killeshal.com/steel_lintels.htm

http://www.killeshal.com/toc.htm

what to replace a timber lintel with?
 

On Sat, 31 Jan 2004 15:38:50 GMT, "BigWallop"
wrote:

Try looking through these pages:

http://www.killeshal.com/concrete_lintels.htm

http://www.killeshal.com/steel_lintels.htm

http://www.killeshal.com/toc.htm


thanks, i'll work with those tables now.

i am assuming that 12 Kn/M is more than two big people standing on the
step holding a piano.

am i too far off?

what to replace a timber lintel with?
 

At 5 foot by 9 1/2 by 4 3/4 inches it sounds more like a step than a
lintle. You might pour the concrete yourself if you can set up the
bottom to jold it in place until it sets. That's the most waterproof way
of doing it. Failing that Make th epiece up with layers of wood treated
with preservative. That's the simplest and quickest way.

Or you could get a timberyard or a tree surgeon to cut you a chunk of
tree.


--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

what to replace a timber lintel with?
 

"mat." wrote in message
...
On Sat, 31 Jan 2004 15:38:50 GMT, "BigWallop"
wrote:

Try looking through these pages:

http://www.killeshal.com/concrete_lintels.htm

http://www.killeshal.com/steel_lintels.htm

http://www.killeshal.com/toc.htm


thanks, i'll work with those tables now.

i am assuming that 12 Kn/M is more than two big people standing on the
step holding a piano.

am i too far off?

See this page: (It's further down in bold text)

http://uk.geocities.com/magoos_universe/convert.htm


---
http://www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.576 / Virus Database: 365 - Release Date: 30/01/04

what to replace a timber lintel with?
 

"mat." wrote in message
...
On Sat, 31 Jan 2004 15:38:50 GMT, "BigWallop"
wrote:

Try looking through these pages:

http://www.killeshal.com/concrete_lintels.htm

http://www.killeshal.com/steel_lintels.htm

http://www.killeshal.com/toc.htm


thanks, i'll work with those tables now.

i am assuming that 12 Kn/M is more than two big people standing on the
step holding a piano.

am i too far off?


Newton

The SI unit of force; symbol N.
It is equal to the force needed to accelerate a mass of 1kg by 1 metre per
second, in one second.

It is also the SI unit of modulus of elasticity.


---
http://www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.576 / Virus Database: 365 - Release Date: 30/01/04

what to replace a timber lintel with?
 

Subject: what to replace a timber lintel with?
From: "BigWallop"
Date: 02/02/04 07:28 GMT Standard Time
Message-id:


"mat." wrote in message
.. .
On Sat, 31 Jan 2004 15:38:50 GMT, "BigWallop"
wrote:

Try looking through these pages:

http://www.killeshal.com/concrete_lintels.htm

http://www.killeshal.com/steel_lintels.htm

http://www.killeshal.com/toc.htm


thanks, i'll work with those tables now.

i am assuming that 12 Kn/M is more than two big people standing on the
step holding a piano.

am i too far off?


Newton

The SI unit of force; symbol N.
It is equal to the force needed to accelerate a mass of 1kg by 1 metre per
second, in one second.

It is also the SI unit of modulus of elasticity.

Nope - that's Newtons per square metre. Modulus of elasticity is a pressure not
a force.


Dave Baker - Puma Race Engines (www.pumaracing.co.uk)
I'm not at all sure why women like men. We're argumentative, childish,
unsociable and extremely unappealing naked. I'm quite grateful they do though.