Fixing mirror to tiled plasterboard wall
 

Hi

Can someone recommend the best method of fixing a fairly heavy mirror to a
plasterboard wall that is tiled with ceramic tiles (bathroom wall)?

The back of the mirror has two standard slots to be hung on to medium -
large screws.

If the wall was brick etc. I would just use some heavy duty wallplugs but I
am not sure what to use on this wall. The tiles are 6mm thick, the
plasterboard is 12mm so with tile cement etc it is probably a little over
20mm thick. On a normal wall I would use screws that were 11/2 x 10 or maybe
1 3/4 x 10, is there a suitable plug that will allow me to use these?

Thanks

Fixing mirror to tiled plasterboard wall
 

On Wed, 31 Dec 2003 18:56:37 -0000, "N"
wrote:

Hi

Can someone recommend the best method of fixing a fairly heavy mirror to a
plasterboard wall that is tiled with ceramic tiles (bathroom wall)?

The back of the mirror has two standard slots to be hung on to medium -
large screws.

If the wall was brick etc. I would just use some heavy duty wallplugs but I
am not sure what to use on this wall. The tiles are 6mm thick, the
plasterboard is 12mm so with tile cement etc it is probably a little over
20mm thick. On a normal wall I would use screws that were 11/2 x 10 or maybe
1 3/4 x 10, is there a suitable plug that will allow me to use these?

Thanks


Remember to sink the fixing beneath the level of the tiles otherwise
you run the risk of splitting them whnee you tighten the screw.

There are a myriad of fixings suitable for this application. Have a
look in Screwfix or visit your local shed.


Paul Mc Cann

Fixing mirror to tiled plasterboard wall
 

"Paul Mc Cann" wrote in message


There are a myriad of fixings suitable for this application. Have a
look in Screwfix or visit your local shed.

The more fixings you use the better the spread of the weight will be.
You could stick with the fittings you have if you glued two battons to
the wall to hold them.

If you weren't bothered about taking the mirror off and not doing
damage in the future you could just glue the mirror to the wall. Double
sided adhesive tape might mean you'd only damage the mirror. I couldn't
say for sure.

There is info about mastics for mirrors on here somewhere.


--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

Fixing mirror to tiled plasterboard wall
 

In article lgate.org,
Michael McNeil writes

There is info about mastics for mirrors on here somewhere.

I have a note in my files: "Screwfix mirror mounting mastic: part
number D14491". HTH.

Fixing mirror to tiled plasterboard wall
 

On Wed, 31 Dec 2003 20:58:05 +0000, Mike Tomlinson
wrote:

In article lgate.org,
Michael McNeil writes

There is info about mastics for mirrors on here somewhere.

I have a note in my files: "Screwfix mirror mounting mastic: part
number D14491". HTH.


Flabeg make mounting kits using adhesive for attaching bathroom
mirrors to walls. Different kits for different sizes of mirror.
They do not seem to quote a web address on their literature (Swiss
company in Furth) We got ours from a shop selling bathroom equipment
including mirrors.

Fixing mirror to tiled plasterboard wall
 

The problem i have is that the design of this mirrormeans I can not tighten
it against the wall like you would with say a coat hanger. Unfortunately, it
needs me to leave about 1/2 inch or so of the screw protruding from the wall
to hang it on. All the fixings I have seen require you to fully tighten them
e.g. to compress the toggle etc.

As the mirror is in a chrome frame I can't see how i can fix it with
adhesive, it is this framework that adds to the weight.

Any suggestions?


"Mike Tomlinson" wrote in message
...
In article lgate.org,
Michael McNeil writes

There is info about mastics for mirrors on here somewhere.

I have a note in my files: "Screwfix mirror mounting mastic: part
number D14491". HTH.

Fixing mirror to tiled plasterboard wall
 

"N" wrote in message ...
Hi

Can someone recommend the best method of fixing a fairly heavy mirror to a
plasterboard wall that is tiled with ceramic tiles (bathroom wall)?

The back of the mirror has two standard slots to be hung on to medium -
large screws.

If the wall was brick etc. I would just use some heavy duty wallplugs but I
am not sure what to use on this wall. The tiles are 6mm thick, the
plasterboard is 12mm so with tile cement etc it is probably a little over
20mm thick. On a normal wall I would use screws that were 11/2 x 10 or maybe
1 3/4 x 10, is there a suitable plug that will allow me to use these?

Use a spring-toggle cavity fastening, but remove the screw before use
and fit a bit of tubing sufficiently long to allow the mirror to slot
on, and a washer for the tube to bear against.

When tightened the washer will be against the tiles, with the length
of tubing and screw head protruding.

Happy New Year.

Fixing mirror to tiled plasterboard wall
 

"N" wrote in message
...
The problem i have is that the design of this mirrormeans I can not tighten
it against the wall like you would with say a coat hanger. Unfortunately, it
needs me to leave about 1/2 inch or so of the screw protruding from the wall
to hang it on. All the fixings I have seen require you to fully tighten them
e.g. to compress the toggle etc.

Withe a toggle type fitting you could fit an additional nut and washer on the
the toggle fitting so that the screw head sticks out a little way. (Washer
pressing on tile and nut pressing on washer - Hold nut still and tighten screw
to secure fixing)


Michael Chare

Fixing mirror to tiled plasterboard wall
 

N wrote:

"mike" robowen(no spam)1@(no spam)v21.me.uk wrote in message
...

"N" wrote in message
...

Can someone recommend the best method of fixing a fairly heavy mirror to
a
plasterboard wall that is tiled with ceramic tiles (bathroom wall)?

The back of the mirror has two standard slots to be hung on to medium -
large screws.

If the wall was brick etc. I would just use some heavy duty wallplugs
but
I
am not sure what to use on this wall. The tiles are 6mm thick, the
plasterboard is 12mm so with tile cement etc it is probably a little
over
20mm thick. On a normal wall I would use screws that were 11/2 x 10 or
maybe
1 3/4 x 10, is there a suitable plug that will allow me to use these?

Best to try and find the battons in the stud wall for a better fix.
If you cant find them, you could use "toggles", I saw some other groupies
talking about them earlier.

http://www.screwfix.com/app/sfd/cat/...10479&id=15328
this was the referral they gave

The problem i have is that the design of this mirrormeans I can not tighten
it against the wall like you would with say a coat hanger. Unfortunately, it
needs me to leave about 1/2 inch or so of the screw protruding from the wall
to hang it on. All the fixings I have seen require you to fully tighten them
e.g. to compress the toggle etc.

As the mirror is in a chrome frame I can't see how i can fix it with
adhesive, it is this framework that adds to the weight.

Any suggestions?

http://www.screwfix.com/app/sfd/cat/...45260&id=11143

Is certainly one which can leave a protruding bolt head. I have
used them in a similar wall with much more cantilevered loading
than your mirror would impose.

They need quite a large hole in the tile, and are best at a join,
so there is something for the fixing to grip to stop it turning.

Chris
--
Chris J Dixon Nottingham UK


Have dancing shoes, will ceilidh.