Tape for use in a freezer
 

Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Tape for use in a freezer
 

On 03/09/16 12:33, Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

not the answer you wanted, but I have generally found them not too
expensive to replace

plastic cement will repair brittle styrene



--
Religion is regarded by the common people as true, by the wise as
foolish, and by the rulers as useful.

(Seneca the Younger, 65 AD)

Tape for use in a freezer
 

Mark Allread wrote:

Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them.

Check the type of plastic, usually marked with a triangle and number or
letters

https://upload.wikimedia.org/wikipedia/commons/c/cd/RIC_Updated.jpg

Get a suitable glue for that type of plastic. Leave the trays out to
warm up and dry off before gluing, has given me good results.

Tape for use in a freezer
 

Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?


Dichloromethane or chloroform may solvent weld them.

Tape for use in a freezer
 

Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Sticky tape strikes me as a pretty rubbish solution to the problem.

Find what plastic the trays are made of and it may be that there is a
solvent glue which will effectively weld the cracks. If not then I
think I'd either screw some 'patches' of sheet metal or plastic over
them or I'd bind them together by drilling small holes and using cable
ties.

--
Chris Green
·

Tape for use in a freezer
 

"Mark Allread" wrote in message
o.uk...
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

bout 6 months ago I repaired one with some wide, clear, sticky tape that I
had acquired from the pound shop

it's still holding

tim

Tape for use in a freezer
 

On 9/3/2016 2:11 PM, Chris Green wrote:
Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Sticky tape strikes me as a pretty rubbish solution to the problem.

Find what plastic the trays are made of and it may be that there is a
solvent glue which will effectively weld the cracks. If not then I
think I'd either screw some 'patches' of sheet metal or plastic over
them or I'd bind them together by drilling small holes and using cable
ties.


I have some which crack around the "handle" recess, and thick clear 50mm
tape as sold for greenhouse repairs works fine. As would the aluminium
tape, I suspect.

Tape for use in a freezer
 

on 03/09/2016, newshound supposed :
On 9/3/2016 2:11 PM, Chris Green wrote:
Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Sticky tape strikes me as a pretty rubbish solution to the problem.

Find what plastic the trays are made of and it may be that there is a
solvent glue which will effectively weld the cracks. If not then I
think I'd either screw some 'patches' of sheet metal or plastic over
them or I'd bind them together by drilling small holes and using cable
ties.


I have some which crack around the "handle" recess, and thick clear 50mm tape
as sold for greenhouse repairs works fine. As would the aluminium tape, I
suspect.

+1

I also added some of those U shaped plastic binders they sell in
stationers, for binding several sheets of A4 into a 'book' form, where
they had cracked at the hand grip.

Tape for use in a freezer
 

Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?


I always use superglue liberally.

Tape for use in a freezer
 

In article ,
says...

Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Sticky tape strikes me as a pretty rubbish solution to the problem.

Find what plastic the trays are made of and it may be that there is a
solvent glue which will effectively weld the cracks. If not then I
think I'd either screw some 'patches' of sheet metal

I wouldn't want to use metal since the differential
expansion/contraction rates would be a problem.

Tape for use in a freezer
 

Huge presented the following explanation :
On 2016-09-03, Harry Bloomfield wrote:
on 03/09/2016, newshound supposed :
On 9/3/2016 2:11 PM, Chris Green wrote:
Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?

Sticky tape strikes me as a pretty rubbish solution to the problem.

Find what plastic the trays are made of and it may be that there is a
solvent glue which will effectively weld the cracks. If not then I
think I'd either screw some 'patches' of sheet metal or plastic over
them or I'd bind them together by drilling small holes and using cable
ties.


I have some which crack around the "handle" recess, and thick clear 50mm
tape as sold for greenhouse repairs works fine. As would the aluminium
tape, I suspect.

+1

I also added some of those U shaped plastic binders they sell in
stationers, for binding several sheets of A4 into a 'book' form, where
they had cracked at the hand grip.

Those are dead handy, aren't they? I already repaired our fridge with one.

Yep - I reinforced all of the drawer molded in finger grips on our
freezer, after three broke.

Tape for use in a freezer
 

On Sat, 03 Sep 2016 06:33:29 -0500, Mark Allread wrote:

Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them.

Anyone done anything similar and can offer a view please?

Thanks for all the suggestions - there are probably enough cracks in them
for me to try all the solutions :( but initially I'll go for the
Greenhouse repair tape.

Tape for use in a freezer
 

On 03/09/2016 12:33, Mark Allread wrote:
Having defrosted the freezer I have found that a number of the plastic
trays have developed cracks in them. Of course it is not my wife's fault
even though she is the one who uses it most frequently.

The best solution appears to be to tape them up to hold them together
once I've drilled some small holes to stop the cracks spreading but what
sort of tape to use? Duct tape/gaffer tape I doubt will have the
necessary resistance to damp and cold so I was thinking of something like
the aluminium tape used on gutters etc.

Anyone done anything similar and can offer a view please?


I repaired a drawer that the wife dropped with araldite and some plastic
strips cut from an asda gift card. Its still ok after two years.