Uneven concrete base help
Hello there. Looking for some advice ref an uneven concrete base. I am
replacing an existing shed with a log cabin garage. Chrcking the levels shows they are not level enough for the cabin(the approx concrete area is 10m x 4.5m) and i dont want to expense of having to destroy and rebuild as the cabin only requires 4m x 6m space. The cabin foundation is completely supported from the perimeter bearer logs, unlike a traditional shed. With this in mind I was going to create a level perimeter footprint by cementing and achoring a concrete lintel base on top of the existing uneven base to give the cabin a solid and level footing with a ramp leading up the 65mm slab for entry. Any suggestions or alternative ideas? Many thanks in advance. -- for full context, visit http://www.homeownershub.com/uk-diy/...p-1152117-.htm |
Uneven concrete base help
On 23/08/16 14:14, Gmac2k16 wrote:
Hello there. Looking for some advice ref an uneven concrete base. I am replacing an existing shed with a log cabin garage. Chrcking the levels shows they are not level enough for the cabin(the approx concrete area is 10m x 4.5m) and i dont want to expense of having to destroy and rebuild as the cabin only requires 4m x 6m space. The cabin foundation is completely supported from the perimeter bearer logs, unlike a traditional shed. With this in mind I was going to create a level perimeter footprint by cementing and achoring a concrete lintel base on top of the existing uneven base to give the cabin a solid and level footing with a ramp leading up the 65mm slab for entry. Any suggestions or alternative ideas? Many thanks in advance. sounds pretty much the best plan. The other possibility is to get cheap concrete paving slabs and lay on a variable depth mortar bed. Or build a small wooden casting mould with level tops and fill it full of concrete and build up that way. ramps as before in either case. -- "In our post-modern world, climate science is not powerful because it is true: it is true because it is powerful." Lucas Bergkamp |
Uneven concrete base help
On Tuesday, 23 August 2016 14:29:20 UTC+1, The Natural Philosopher wrote:
On 23/08/16 14:14, Gmac2k16 wrote: Hello there. Looking for some advice ref an uneven concrete base. I am replacing an existing shed with a log cabin garage. Chrcking the levels shows they are not level enough for the cabin(the approx concrete area is 10m x 4.5m) and i dont want to expense of having to destroy and rebuild as the cabin only requires 4m x 6m space. The cabin foundation is completely supported from the perimeter bearer logs, unlike a traditional shed. With this in mind I was going to create a level perimeter footprint by cementing and achoring a concrete lintel base on top of the existing uneven base to give the cabin a solid and level footing with a ramp leading up the 65mm slab for entry. Any suggestions or alternative ideas? Many thanks in advance. sounds pretty much the best plan. The other possibility is to get cheap concrete paving slabs and lay on a variable depth mortar bed. Or build a small wooden casting mould with level tops and fill it full of concrete and build up that way. ramps as before in either case. or bricks/stones to sit the walls on, if the amount of unevenness is otherwise acceptable. NT |
Uneven concrete base help
On 23/08/16 14:29, The Natural Philosopher wrote:
On 23/08/16 14:14, Gmac2k16 wrote: Hello there. Looking for some advice ref an uneven concrete base. I am replacing an existing shed with a log cabin garage. Chrcking the levels shows they are not level enough for the cabin(the approx concrete area is 10m x 4.5m) and i dont want to expense of having to destroy and rebuild as the cabin only requires 4m x 6m space. The cabin foundation is completely supported from the perimeter bearer logs, unlike a traditional shed. With this in mind I was going to create a level perimeter footprint by cementing and achoring a concrete lintel base on top of the existing uneven base to give the cabin a solid and level footing with a ramp leading up the 65mm slab for entry. Any suggestions or alternative ideas? Many thanks in advance. sounds pretty much the best plan. The other possibility is to get cheap concrete paving slabs and lay on a variable depth mortar bed. Or build a small wooden casting mould with level tops and fill it full of concrete and build up that way. ramps as before in either case. The OP could use concrete edging strips - like slabs but narrow and long on a mortar bed too. |
Uneven concrete base help
|
Uneven concrete base help
replying to Tim Watts, Gmac2k16 wrote:
Thanks Guys! Lots to consider -- for full context, visit http://www.homeownershub.com/uk-diy/...p-1152117-.htm |
All times are GMT +1. The time now is 10:16 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter